mirror of
				https://github.com/smaeul/u-boot.git
				synced 2025-10-26 09:38:14 +00:00 
			
		
		
		
	Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
		
			
				
	
	
		
			433 lines
		
	
	
		
			9.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			433 lines
		
	
	
		
			9.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
 | |
|  *
 | |
|  * Loosely based on the old code and Linux's PXA MMC driver
 | |
|  *
 | |
|  * SPDX-License-Identifier:	GPL-2.0+
 | |
|  */
 | |
| 
 | |
| #include <config.h>
 | |
| #include <common.h>
 | |
| #include <malloc.h>
 | |
| 
 | |
| #include <mmc.h>
 | |
| #include <asm/errno.h>
 | |
| #include <asm/arch/hardware.h>
 | |
| #include <asm/arch/regs-mmc.h>
 | |
| #include <asm/io.h>
 | |
| 
 | |
| /* PXAMMC Generic default config for various CPUs */
 | |
| #if defined(CONFIG_CPU_PXA25X)
 | |
| #define PXAMMC_FIFO_SIZE	1
 | |
| #define PXAMMC_MIN_SPEED	312500
 | |
| #define PXAMMC_MAX_SPEED	20000000
 | |
| #define PXAMMC_HOST_CAPS	(0)
 | |
| #elif defined(CONFIG_CPU_PXA27X)
 | |
| #define PXAMMC_CRC_SKIP
 | |
| #define PXAMMC_FIFO_SIZE	32
 | |
| #define PXAMMC_MIN_SPEED	304000
 | |
| #define PXAMMC_MAX_SPEED	19500000
 | |
| #define PXAMMC_HOST_CAPS	(MMC_MODE_4BIT)
 | |
| #elif defined(CONFIG_CPU_MONAHANS)
 | |
| #define PXAMMC_FIFO_SIZE	32
 | |
| #define PXAMMC_MIN_SPEED	304000
 | |
| #define PXAMMC_MAX_SPEED	26000000
 | |
| #define PXAMMC_HOST_CAPS	(MMC_MODE_4BIT | MMC_MODE_HS)
 | |
| #else
 | |
| #error "This CPU isn't supported by PXA MMC!"
 | |
| #endif
 | |
| 
 | |
| #define MMC_STAT_ERRORS							\
 | |
| 	(MMC_STAT_RES_CRC_ERROR | MMC_STAT_SPI_READ_ERROR_TOKEN |	\
 | |
| 	MMC_STAT_CRC_READ_ERROR | MMC_STAT_TIME_OUT_RESPONSE |		\
 | |
| 	MMC_STAT_READ_TIME_OUT | MMC_STAT_CRC_WRITE_ERROR)
 | |
| 
 | |
| /* 1 millisecond (in wait cycles below it's 100 x 10uS waits) */
 | |
| #define PXA_MMC_TIMEOUT	100
 | |
| 
 | |
| struct pxa_mmc_priv {
 | |
| 	struct pxa_mmc_regs *regs;
 | |
| };
 | |
| 
 | |
| /* Wait for bit to be set */
 | |
| static int pxa_mmc_wait(struct mmc *mmc, uint32_t mask)
 | |
| {
 | |
| 	struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv;
 | |
| 	struct pxa_mmc_regs *regs = priv->regs;
 | |
| 	unsigned int timeout = PXA_MMC_TIMEOUT;
 | |
| 
 | |
| 	/* Wait for bit to be set */
 | |
| 	while (--timeout) {
 | |
| 		if (readl(®s->stat) & mask)
 | |
| 			break;
 | |
| 		udelay(10);
 | |
| 	}
 | |
| 
 | |
| 	if (!timeout)
 | |
| 		return -ETIMEDOUT;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int pxa_mmc_stop_clock(struct mmc *mmc)
 | |
| {
 | |
| 	struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv;
 | |
| 	struct pxa_mmc_regs *regs = priv->regs;
 | |
| 	unsigned int timeout = PXA_MMC_TIMEOUT;
 | |
| 
 | |
| 	/* If the clock aren't running, exit */
 | |
| 	if (!(readl(®s->stat) & MMC_STAT_CLK_EN))
 | |
| 		return 0;
 | |
| 
 | |
| 	/* Tell the controller to turn off the clock */
 | |
| 	writel(MMC_STRPCL_STOP_CLK, ®s->strpcl);
 | |
| 
 | |
| 	/* Wait until the clock are off */
 | |
| 	while (--timeout) {
 | |
| 		if (!(readl(®s->stat) & MMC_STAT_CLK_EN))
 | |
| 			break;
 | |
| 		udelay(10);
 | |
| 	}
 | |
| 
 | |
| 	/* The clock refused to stop, scream and die a painful death */
 | |
| 	if (!timeout)
 | |
| 		return -ETIMEDOUT;
 | |
| 
 | |
| 	/* The clock stopped correctly */
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int pxa_mmc_start_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 | |
| 				uint32_t cmdat)
 | |
| {
 | |
| 	struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv;
 | |
| 	struct pxa_mmc_regs *regs = priv->regs;
 | |
| 	int ret;
 | |
| 
 | |
| 	/* The card can send a "busy" response */
 | |
| 	if (cmd->resp_type & MMC_RSP_BUSY)
 | |
| 		cmdat |= MMC_CMDAT_BUSY;
 | |
| 
 | |
| 	/* Inform the controller about response type */
 | |
| 	switch (cmd->resp_type) {
 | |
| 	case MMC_RSP_R1:
 | |
| 	case MMC_RSP_R1b:
 | |
| 		cmdat |= MMC_CMDAT_R1;
 | |
| 		break;
 | |
| 	case MMC_RSP_R2:
 | |
| 		cmdat |= MMC_CMDAT_R2;
 | |
| 		break;
 | |
| 	case MMC_RSP_R3:
 | |
| 		cmdat |= MMC_CMDAT_R3;
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	/* Load command and it's arguments into the controller */
 | |
| 	writel(cmd->cmdidx, ®s->cmd);
 | |
| 	writel(cmd->cmdarg >> 16, ®s->argh);
 | |
| 	writel(cmd->cmdarg & 0xffff, ®s->argl);
 | |
| 	writel(cmdat, ®s->cmdat);
 | |
| 
 | |
| 	/* Start the controller clock and wait until they are started */
 | |
| 	writel(MMC_STRPCL_START_CLK, ®s->strpcl);
 | |
| 
 | |
| 	ret = pxa_mmc_wait(mmc, MMC_STAT_CLK_EN);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Correct and happy end */
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int pxa_mmc_cmd_done(struct mmc *mmc, struct mmc_cmd *cmd)
 | |
| {
 | |
| 	struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv;
 | |
| 	struct pxa_mmc_regs *regs = priv->regs;
 | |
| 	uint32_t a, b, c;
 | |
| 	int i;
 | |
| 	int stat;
 | |
| 
 | |
| 	/* Read the controller status */
 | |
| 	stat = readl(®s->stat);
 | |
| 
 | |
| 	/*
 | |
| 	 * Linux says:
 | |
| 	 * Did I mention this is Sick.  We always need to
 | |
| 	 * discard the upper 8 bits of the first 16-bit word.
 | |
| 	 */
 | |
| 	a = readl(®s->res) & 0xffff;
 | |
| 	for (i = 0; i < 4; i++) {
 | |
| 		b = readl(®s->res) & 0xffff;
 | |
| 		c = readl(®s->res) & 0xffff;
 | |
| 		cmd->response[i] = (a << 24) | (b << 8) | (c >> 8);
 | |
| 		a = c;
 | |
| 	}
 | |
| 
 | |
| 	/* The command response didn't arrive */
 | |
| 	if (stat & MMC_STAT_TIME_OUT_RESPONSE)
 | |
| 		return -ETIMEDOUT;
 | |
| 	else if (stat & MMC_STAT_RES_CRC_ERROR
 | |
| 			&& cmd->resp_type & MMC_RSP_CRC) {
 | |
| #ifdef	PXAMMC_CRC_SKIP
 | |
| 		if (cmd->resp_type & MMC_RSP_136
 | |
| 				&& cmd->response[0] & (1 << 31))
 | |
| 			printf("Ignoring CRC, this may be dangerous!\n");
 | |
| 		else
 | |
| #endif
 | |
| 		return -EILSEQ;
 | |
| 	}
 | |
| 
 | |
| 	/* The command response was successfully read */
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int pxa_mmc_do_read_xfer(struct mmc *mmc, struct mmc_data *data)
 | |
| {
 | |
| 	struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv;
 | |
| 	struct pxa_mmc_regs *regs = priv->regs;
 | |
| 	uint32_t len;
 | |
| 	uint32_t *buf = (uint32_t *)data->dest;
 | |
| 	int size;
 | |
| 	int ret;
 | |
| 
 | |
| 	len = data->blocks * data->blocksize;
 | |
| 
 | |
| 	while (len) {
 | |
| 		/* The controller has data ready */
 | |
| 		if (readl(®s->i_reg) & MMC_I_REG_RXFIFO_RD_REQ) {
 | |
| 			size = min(len, PXAMMC_FIFO_SIZE);
 | |
| 			len -= size;
 | |
| 			size /= 4;
 | |
| 
 | |
| 			/* Read data into the buffer */
 | |
| 			while (size--)
 | |
| 				*buf++ = readl(®s->rxfifo);
 | |
| 
 | |
| 		}
 | |
| 
 | |
| 		if (readl(®s->stat) & MMC_STAT_ERRORS)
 | |
| 			return -EIO;
 | |
| 	}
 | |
| 
 | |
| 	/* Wait for the transmission-done interrupt */
 | |
| 	ret = pxa_mmc_wait(mmc, MMC_STAT_DATA_TRAN_DONE);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int pxa_mmc_do_write_xfer(struct mmc *mmc, struct mmc_data *data)
 | |
| {
 | |
| 	struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv;
 | |
| 	struct pxa_mmc_regs *regs = priv->regs;
 | |
| 	uint32_t len;
 | |
| 	uint32_t *buf = (uint32_t *)data->src;
 | |
| 	int size;
 | |
| 	int ret;
 | |
| 
 | |
| 	len = data->blocks * data->blocksize;
 | |
| 
 | |
| 	while (len) {
 | |
| 		/* The controller is ready to receive data */
 | |
| 		if (readl(®s->i_reg) & MMC_I_REG_TXFIFO_WR_REQ) {
 | |
| 			size = min(len, PXAMMC_FIFO_SIZE);
 | |
| 			len -= size;
 | |
| 			size /= 4;
 | |
| 
 | |
| 			while (size--)
 | |
| 				writel(*buf++, ®s->txfifo);
 | |
| 
 | |
| 			if (min(len, PXAMMC_FIFO_SIZE) < 32)
 | |
| 				writel(MMC_PRTBUF_BUF_PART_FULL, ®s->prtbuf);
 | |
| 		}
 | |
| 
 | |
| 		if (readl(®s->stat) & MMC_STAT_ERRORS)
 | |
| 			return -EIO;
 | |
| 	}
 | |
| 
 | |
| 	/* Wait for the transmission-done interrupt */
 | |
| 	ret = pxa_mmc_wait(mmc, MMC_STAT_DATA_TRAN_DONE);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Wait until the data are really written to the card */
 | |
| 	ret = pxa_mmc_wait(mmc, MMC_STAT_PRG_DONE);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int pxa_mmc_request(struct mmc *mmc, struct mmc_cmd *cmd,
 | |
| 				struct mmc_data *data)
 | |
| {
 | |
| 	struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv;
 | |
| 	struct pxa_mmc_regs *regs = priv->regs;
 | |
| 	uint32_t cmdat = 0;
 | |
| 	int ret;
 | |
| 
 | |
| 	/* Stop the controller */
 | |
| 	ret = pxa_mmc_stop_clock(mmc);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* If we're doing data transfer, configure the controller accordingly */
 | |
| 	if (data) {
 | |
| 		writel(data->blocks, ®s->nob);
 | |
| 		writel(data->blocksize, ®s->blklen);
 | |
| 		/* This delay can be optimized, but stick with max value */
 | |
| 		writel(0xffff, ®s->rdto);
 | |
| 		cmdat |= MMC_CMDAT_DATA_EN;
 | |
| 		if (data->flags & MMC_DATA_WRITE)
 | |
| 			cmdat |= MMC_CMDAT_WRITE;
 | |
| 	}
 | |
| 
 | |
| 	/* Run in 4bit mode if the card can do it */
 | |
| 	if (mmc->bus_width == 4)
 | |
| 		cmdat |= MMC_CMDAT_SD_4DAT;
 | |
| 
 | |
| 	/* Execute the command */
 | |
| 	ret = pxa_mmc_start_cmd(mmc, cmd, cmdat);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Wait until the command completes */
 | |
| 	ret = pxa_mmc_wait(mmc, MMC_STAT_END_CMD_RES);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Read back the result */
 | |
| 	ret = pxa_mmc_cmd_done(mmc, cmd);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* In case there was a data transfer scheduled, do it */
 | |
| 	if (data) {
 | |
| 		if (data->flags & MMC_DATA_WRITE)
 | |
| 			pxa_mmc_do_write_xfer(mmc, data);
 | |
| 		else
 | |
| 			pxa_mmc_do_read_xfer(mmc, data);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void pxa_mmc_set_ios(struct mmc *mmc)
 | |
| {
 | |
| 	struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv;
 | |
| 	struct pxa_mmc_regs *regs = priv->regs;
 | |
| 	uint32_t tmp;
 | |
| 	uint32_t pxa_mmc_clock;
 | |
| 
 | |
| 	if (!mmc->clock) {
 | |
| 		pxa_mmc_stop_clock(mmc);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* PXA3xx can do 26MHz with special settings. */
 | |
| 	if (mmc->clock == 26000000) {
 | |
| 		writel(0x7, ®s->clkrt);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* Set clock to the card the usual way. */
 | |
| 	pxa_mmc_clock = 0;
 | |
| 	tmp = mmc->f_max / mmc->clock;
 | |
| 	tmp += tmp % 2;
 | |
| 
 | |
| 	while (tmp > 1) {
 | |
| 		pxa_mmc_clock++;
 | |
| 		tmp >>= 1;
 | |
| 	}
 | |
| 
 | |
| 	writel(pxa_mmc_clock, ®s->clkrt);
 | |
| }
 | |
| 
 | |
| static int pxa_mmc_init(struct mmc *mmc)
 | |
| {
 | |
| 	struct pxa_mmc_priv *priv = (struct pxa_mmc_priv *)mmc->priv;
 | |
| 	struct pxa_mmc_regs *regs = priv->regs;
 | |
| 
 | |
| 	/* Make sure the clock are stopped */
 | |
| 	pxa_mmc_stop_clock(mmc);
 | |
| 
 | |
| 	/* Turn off SPI mode */
 | |
| 	writel(0, ®s->spi);
 | |
| 
 | |
| 	/* Set up maximum timeout to wait for command response */
 | |
| 	writel(MMC_RES_TO_MAX_MASK, ®s->resto);
 | |
| 
 | |
| 	/* Mask all interrupts */
 | |
| 	writel(~(MMC_I_MASK_TXFIFO_WR_REQ | MMC_I_MASK_RXFIFO_RD_REQ),
 | |
| 		®s->i_mask);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int pxa_mmc_register(int card_index)
 | |
| {
 | |
| 	struct mmc *mmc;
 | |
| 	struct pxa_mmc_priv *priv;
 | |
| 	uint32_t reg;
 | |
| 	int ret = -ENOMEM;
 | |
| 
 | |
| 	mmc = malloc(sizeof(struct mmc));
 | |
| 	if (!mmc)
 | |
| 		goto err0;
 | |
| 
 | |
| 	priv = malloc(sizeof(struct pxa_mmc_priv));
 | |
| 	if (!priv)
 | |
| 		goto err1;
 | |
| 
 | |
| 	switch (card_index) {
 | |
| 	case 0:
 | |
| 		priv->regs = (struct pxa_mmc_regs *)MMC0_BASE;
 | |
| 		break;
 | |
| 	case 1:
 | |
| 		priv->regs = (struct pxa_mmc_regs *)MMC1_BASE;
 | |
| 		break;
 | |
| 	default:
 | |
| 		printf("PXA MMC: Invalid MMC controller ID (card_index = %d)\n",
 | |
| 			card_index);
 | |
| 		goto err2;
 | |
| 	}
 | |
| 
 | |
| 	mmc->priv = priv;
 | |
| 
 | |
| 	sprintf(mmc->name, "PXA MMC");
 | |
| 	mmc->send_cmd	= pxa_mmc_request;
 | |
| 	mmc->set_ios	= pxa_mmc_set_ios;
 | |
| 	mmc->init	= pxa_mmc_init;
 | |
| 	mmc->getcd	= NULL;
 | |
| 
 | |
| 	mmc->voltages	= MMC_VDD_32_33 | MMC_VDD_33_34;
 | |
| 	mmc->f_max	= PXAMMC_MAX_SPEED;
 | |
| 	mmc->f_min	= PXAMMC_MIN_SPEED;
 | |
| 	mmc->host_caps	= PXAMMC_HOST_CAPS;
 | |
| 
 | |
| 	mmc->b_max = 0;
 | |
| 
 | |
| #ifndef	CONFIG_CPU_MONAHANS	/* PXA2xx */
 | |
| 	reg = readl(CKEN);
 | |
| 	reg |= CKEN12_MMC;
 | |
| 	writel(reg, CKEN);
 | |
| #else				/* PXA3xx */
 | |
| 	reg = readl(CKENA);
 | |
| 	reg |= CKENA_12_MMC0 | CKENA_13_MMC1;
 | |
| 	writel(reg, CKENA);
 | |
| #endif
 | |
| 
 | |
| 	mmc_register(mmc);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err2:
 | |
| 	free(priv);
 | |
| err1:
 | |
| 	free(mmc);
 | |
| err0:
 | |
| 	return ret;
 | |
| }
 |