mirror of
https://github.com/smaeul/u-boot.git
synced 2025-11-03 21:48:15 +00:00
776b2ddbfa
STM32F7 and STM32H7 shares the same UART block, add STM32H7 compatible string. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
152 lines
3.5 KiB
C
152 lines
3.5 KiB
C
/*
|
|
* (C) Copyright 2016
|
|
* Vikas Manocha, <vikas.manocha@st.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <asm/io.h>
|
|
#include <serial.h>
|
|
#include <asm/arch/stm32.h>
|
|
#include "serial_stm32x7.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static int stm32_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct stm32x7_serial_platdata *plat = dev->platdata;
|
|
struct stm32_usart *const usart = plat->base;
|
|
u32 int_div, mantissa, fraction, oversampling;
|
|
|
|
int_div = DIV_ROUND_CLOSEST(plat->clock_rate, baudrate);
|
|
|
|
if (int_div < 16) {
|
|
oversampling = 8;
|
|
setbits_le32(&usart->cr1, USART_CR1_OVER8);
|
|
} else {
|
|
oversampling = 16;
|
|
clrbits_le32(&usart->cr1, USART_CR1_OVER8);
|
|
}
|
|
|
|
mantissa = (int_div / oversampling) << USART_BRR_M_SHIFT;
|
|
fraction = int_div % oversampling;
|
|
|
|
writel(mantissa | fraction, &usart->brr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_serial_getc(struct udevice *dev)
|
|
{
|
|
struct stm32x7_serial_platdata *plat = dev->platdata;
|
|
struct stm32_usart *const usart = plat->base;
|
|
|
|
if ((readl(&usart->sr) & USART_SR_FLAG_RXNE) == 0)
|
|
return -EAGAIN;
|
|
|
|
return readl(&usart->rd_dr);
|
|
}
|
|
|
|
static int stm32_serial_putc(struct udevice *dev, const char c)
|
|
{
|
|
struct stm32x7_serial_platdata *plat = dev->platdata;
|
|
struct stm32_usart *const usart = plat->base;
|
|
|
|
if ((readl(&usart->sr) & USART_SR_FLAG_TXE) == 0)
|
|
return -EAGAIN;
|
|
|
|
writel(c, &usart->tx_dr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct stm32x7_serial_platdata *plat = dev->platdata;
|
|
struct stm32_usart *const usart = plat->base;
|
|
|
|
if (input)
|
|
return readl(&usart->sr) & USART_SR_FLAG_RXNE ? 1 : 0;
|
|
else
|
|
return readl(&usart->sr) & USART_SR_FLAG_TXE ? 0 : 1;
|
|
}
|
|
|
|
static int stm32_serial_probe(struct udevice *dev)
|
|
{
|
|
struct stm32x7_serial_platdata *plat = dev->platdata;
|
|
struct stm32_usart *const usart = plat->base;
|
|
|
|
#ifdef CONFIG_CLK
|
|
int ret;
|
|
struct clk clk;
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_enable(&clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable clock\n");
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
plat->clock_rate = clk_get_rate(&clk);
|
|
if (plat->clock_rate < 0) {
|
|
clk_disable(&clk);
|
|
return plat->clock_rate;
|
|
};
|
|
|
|
/* Disable usart-> disable overrun-> enable usart */
|
|
clrbits_le32(&usart->cr1, USART_CR1_RE | USART_CR1_TE | USART_CR1_UE);
|
|
setbits_le32(&usart->cr3, USART_CR3_OVRDIS);
|
|
setbits_le32(&usart->cr1, USART_CR1_RE | USART_CR1_TE | USART_CR1_UE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
static const struct udevice_id stm32_serial_id[] = {
|
|
{.compatible = "st,stm32f7-usart"},
|
|
{.compatible = "st,stm32f7-uart"},
|
|
{.compatible = "st,stm32h7-usart"},
|
|
{.compatible = "st,stm32h7-uart"},
|
|
{}
|
|
};
|
|
|
|
static int stm32_serial_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
|
|
fdt_addr_t addr;
|
|
|
|
addr = devfdt_get_addr(dev);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
plat->base = (struct stm32_usart *)addr;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dm_serial_ops stm32_serial_ops = {
|
|
.putc = stm32_serial_putc,
|
|
.pending = stm32_serial_pending,
|
|
.getc = stm32_serial_getc,
|
|
.setbrg = stm32_serial_setbrg,
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_stm32) = {
|
|
.name = "serial_stm32x7",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = of_match_ptr(stm32_serial_id),
|
|
.ofdata_to_platdata = of_match_ptr(stm32_serial_ofdata_to_platdata),
|
|
.platdata_auto_alloc_size = sizeof(struct stm32x7_serial_platdata),
|
|
.ops = &stm32_serial_ops,
|
|
.probe = stm32_serial_probe,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|