mirror of
				https://github.com/smaeul/u-boot.git
				synced 2025-11-04 05:50:17 +00:00 
			
		
		
		
	Support Holtek HT1380/HT1381 Serial Timekeeper Chip. It provides seconds , minutes, hours, day of the week, date, month and year information. Datasheet: https://www.holtek.com.tw/documents/10179/11842/ht1380_1v130.pdf Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
		
			
				
	
	
		
			330 lines
		
	
	
		
			6.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			330 lines
		
	
	
		
			6.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
// SPDX-License-Identifier: GPL-2.0+
 | 
						|
/*
 | 
						|
 * Holtek HT1380/HT1381 Serial Timekeeper Chip
 | 
						|
 *
 | 
						|
 * Communication with the chip is vendor-specific.
 | 
						|
 * It is done via 3 GPIO pins: reset, clock, and data.
 | 
						|
 * Describe in .dts this way:
 | 
						|
 *
 | 
						|
 * rtc {
 | 
						|
 *         compatible = "holtek,ht1380";
 | 
						|
 *         rst-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 | 
						|
 *         clk-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
 | 
						|
 *         dat-gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
 | 
						|
 * };
 | 
						|
 *
 | 
						|
 */
 | 
						|
 | 
						|
#include <common.h>
 | 
						|
#include <dm.h>
 | 
						|
#include <rtc.h>
 | 
						|
#include <bcd.h>
 | 
						|
#include <asm/gpio.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
 | 
						|
struct ht1380_priv {
 | 
						|
	struct gpio_desc rst_desc;
 | 
						|
	struct gpio_desc clk_desc;
 | 
						|
	struct gpio_desc dat_desc;
 | 
						|
};
 | 
						|
 | 
						|
enum registers {
 | 
						|
	SEC,
 | 
						|
	MIN,
 | 
						|
	HOUR,
 | 
						|
	MDAY,
 | 
						|
	MONTH,
 | 
						|
	WDAY,
 | 
						|
	YEAR,
 | 
						|
	WP,
 | 
						|
	N_REGS
 | 
						|
};
 | 
						|
 | 
						|
enum hour_mode {
 | 
						|
	AMPM_MODE = 0x80, /* RTC is in AM/PM mode */
 | 
						|
	PM_NOW = 0x20,    /* set if PM, clear if AM */
 | 
						|
};
 | 
						|
 | 
						|
static const int BURST = 0xbe;
 | 
						|
static const int READ = 1;
 | 
						|
 | 
						|
static void ht1380_half_period_delay(void)
 | 
						|
{
 | 
						|
	/*
 | 
						|
	 * Delay for half a period. 1 us complies with the 500 KHz maximum
 | 
						|
	 * input serial clock limit given by the datasheet.
 | 
						|
	 */
 | 
						|
	udelay(1);
 | 
						|
}
 | 
						|
 | 
						|
static int ht1380_send_byte(struct ht1380_priv *priv, int byte)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	for (int bit = 0; bit < 8; bit++) {
 | 
						|
		ret = dm_gpio_set_value(&priv->dat_desc, byte >> bit & 1);
 | 
						|
		if (ret)
 | 
						|
			break;
 | 
						|
		ht1380_half_period_delay();
 | 
						|
 | 
						|
		ret = dm_gpio_set_value(&priv->clk_desc, 1);
 | 
						|
		if (ret)
 | 
						|
			break;
 | 
						|
		ht1380_half_period_delay();
 | 
						|
 | 
						|
		ret = dm_gpio_set_value(&priv->clk_desc, 0);
 | 
						|
		if (ret)
 | 
						|
			break;
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * Leave reset state. The transfer operation can then be started.
 | 
						|
 */
 | 
						|
static int ht1380_reset_off(struct ht1380_priv *priv)
 | 
						|
{
 | 
						|
	const unsigned int T_CC = 4; /* us, Reset to Clock Setup */
 | 
						|
	int ret;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Leave RESET state.
 | 
						|
	 * Make sure we make the minimal delay required by the datasheet.
 | 
						|
	 */
 | 
						|
	ret = dm_gpio_set_value(&priv->rst_desc, 0);
 | 
						|
	udelay(T_CC);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * Enter reset state. Completes the transfer operation.
 | 
						|
 */
 | 
						|
static int ht1380_reset_on(struct ht1380_priv *priv)
 | 
						|
{
 | 
						|
	const unsigned int T_CWH = 4; /* us, Reset Inactive Time */
 | 
						|
	int ret;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Enter RESET state.
 | 
						|
	 * Make sure we make the minimal delay required by the datasheet.
 | 
						|
	 */
 | 
						|
	ret = dm_gpio_set_value(&priv->rst_desc, 1);
 | 
						|
	udelay(T_CWH);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int ht1380_rtc_get(struct udevice *dev, struct rtc_time *tm)
 | 
						|
{
 | 
						|
	struct ht1380_priv *priv = dev_get_priv(dev);
 | 
						|
	int ret, i, bit, reg[N_REGS];
 | 
						|
 | 
						|
	ret = dm_gpio_set_value(&priv->clk_desc, 0);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = dm_gpio_set_dir_flags(&priv->dat_desc, GPIOD_IS_OUT);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = ht1380_reset_off(priv);
 | 
						|
	if (ret)
 | 
						|
		goto exit;
 | 
						|
 | 
						|
	ret = ht1380_send_byte(priv, BURST + READ);
 | 
						|
	if (ret)
 | 
						|
		goto exit;
 | 
						|
 | 
						|
	ret = dm_gpio_set_dir_flags(&priv->dat_desc, GPIOD_IS_IN);
 | 
						|
	if (ret)
 | 
						|
		goto exit;
 | 
						|
 | 
						|
	for (i = 0; i < N_REGS; i++) {
 | 
						|
		reg[i] = 0;
 | 
						|
 | 
						|
		for (bit = 0; bit < 8; bit++) {
 | 
						|
			ht1380_half_period_delay();
 | 
						|
 | 
						|
			ret = dm_gpio_set_value(&priv->clk_desc, 1);
 | 
						|
			if (ret)
 | 
						|
				goto exit;
 | 
						|
			ht1380_half_period_delay();
 | 
						|
 | 
						|
			reg[i] |= dm_gpio_get_value(&priv->dat_desc) << bit;
 | 
						|
			ret = dm_gpio_set_value(&priv->clk_desc, 0);
 | 
						|
			if (ret)
 | 
						|
				goto exit;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	ret = -EINVAL;
 | 
						|
 | 
						|
	/* Correctness check: some bits are always zero */
 | 
						|
	if (reg[MIN] & 0x80 || reg[HOUR] & 0x40 || reg[MDAY] & 0xc0 ||
 | 
						|
	    reg[MONTH] & 0xe0 || reg[WDAY] & 0xf8 || reg[WP] & 0x7f)
 | 
						|
		goto exit;
 | 
						|
 | 
						|
	/* Correctness check: some registers are always non-zero */
 | 
						|
	if (!reg[MDAY] || !reg[MONTH] || !reg[WDAY])
 | 
						|
		goto exit;
 | 
						|
 | 
						|
	tm->tm_sec = bcd2bin(reg[SEC]);
 | 
						|
	tm->tm_min = bcd2bin(reg[MIN]);
 | 
						|
	if (reg[HOUR] & AMPM_MODE) {
 | 
						|
		/* AM-PM Mode, range is 01-12 */
 | 
						|
		tm->tm_hour = bcd2bin(reg[HOUR] & 0x1f) % 12;
 | 
						|
		if (reg[HOUR] & PM_NOW) {
 | 
						|
			/* it is PM (otherwise AM) */
 | 
						|
			tm->tm_hour += 12;
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		/* 24-hour Mode, range is 0-23 */
 | 
						|
		tm->tm_hour = bcd2bin(reg[HOUR]);
 | 
						|
	}
 | 
						|
	tm->tm_mday = bcd2bin(reg[MDAY]);
 | 
						|
	tm->tm_mon = bcd2bin(reg[MONTH]);
 | 
						|
	tm->tm_year = 2000 + bcd2bin(reg[YEAR]);
 | 
						|
	tm->tm_wday = bcd2bin(reg[WDAY]) - 1;
 | 
						|
	tm->tm_yday = 0;
 | 
						|
	tm->tm_isdst = 0;
 | 
						|
 | 
						|
	ret = 0;
 | 
						|
 | 
						|
exit:
 | 
						|
	ht1380_reset_on(priv);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int ht1380_write_protection_off(struct ht1380_priv *priv)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	const int PROTECT = 0x8e;
 | 
						|
 | 
						|
	ret = ht1380_reset_off(priv);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = ht1380_send_byte(priv, PROTECT);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
	ret = ht1380_send_byte(priv, 0); /* WP bit is 0 */
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	return ht1380_reset_on(priv);
 | 
						|
}
 | 
						|
 | 
						|
static int ht1380_rtc_set(struct udevice *dev, const struct rtc_time *tm)
 | 
						|
{
 | 
						|
	struct ht1380_priv *priv = dev_get_priv(dev);
 | 
						|
	int ret, i, reg[N_REGS];
 | 
						|
 | 
						|
	ret = dm_gpio_set_value(&priv->clk_desc, 0);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = dm_gpio_set_dir_flags(&priv->dat_desc, GPIOD_IS_OUT);
 | 
						|
	if (ret)
 | 
						|
		goto exit;
 | 
						|
 | 
						|
	ret = ht1380_write_protection_off(priv);
 | 
						|
	if (ret)
 | 
						|
		goto exit;
 | 
						|
 | 
						|
	reg[SEC] = bin2bcd(tm->tm_sec);
 | 
						|
	reg[MIN] = bin2bcd(tm->tm_min);
 | 
						|
	reg[HOUR] = bin2bcd(tm->tm_hour);
 | 
						|
	reg[MDAY] = bin2bcd(tm->tm_mday);
 | 
						|
	reg[MONTH] = bin2bcd(tm->tm_mon);
 | 
						|
	reg[WDAY] = bin2bcd(tm->tm_wday) + 1;
 | 
						|
	reg[YEAR] = bin2bcd(tm->tm_year - 2000);
 | 
						|
	reg[WP] = 0x80; /* WP bit is 1 */
 | 
						|
 | 
						|
	ret = ht1380_reset_off(priv);
 | 
						|
	if (ret)
 | 
						|
		goto exit;
 | 
						|
 | 
						|
	ret = ht1380_send_byte(priv, BURST);
 | 
						|
	for (i = 0; i < N_REGS && ret; i++)
 | 
						|
		ret = ht1380_send_byte(priv, reg[i]);
 | 
						|
 | 
						|
exit:
 | 
						|
	ht1380_reset_on(priv);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int ht1380_probe(struct udevice *dev)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	struct ht1380_priv *priv;
 | 
						|
 | 
						|
	priv = dev_get_priv(dev);
 | 
						|
	if (!priv)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	ret = gpio_request_by_name(dev, "rst-gpios", 0,
 | 
						|
				   &priv->rst_desc, GPIOD_IS_OUT);
 | 
						|
	if (ret)
 | 
						|
		goto fail_rst;
 | 
						|
 | 
						|
	ret = gpio_request_by_name(dev, "clk-gpios", 0,
 | 
						|
				   &priv->clk_desc, GPIOD_IS_OUT);
 | 
						|
	if (ret)
 | 
						|
		goto fail_clk;
 | 
						|
 | 
						|
	ret = gpio_request_by_name(dev, "dat-gpios", 0,
 | 
						|
				   &priv->dat_desc, 0);
 | 
						|
	if (ret)
 | 
						|
		goto fail_dat;
 | 
						|
 | 
						|
	ret = ht1380_reset_on(priv);
 | 
						|
	if (ret)
 | 
						|
		goto fail;
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
fail:
 | 
						|
	dm_gpio_free(dev, &priv->dat_desc);
 | 
						|
fail_dat:
 | 
						|
	dm_gpio_free(dev, &priv->clk_desc);
 | 
						|
fail_clk:
 | 
						|
	dm_gpio_free(dev, &priv->rst_desc);
 | 
						|
fail_rst:
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int ht1380_remove(struct udevice *dev)
 | 
						|
{
 | 
						|
	struct ht1380_priv *priv = dev_get_priv(dev);
 | 
						|
 | 
						|
	dm_gpio_free(dev, &priv->rst_desc);
 | 
						|
	dm_gpio_free(dev, &priv->clk_desc);
 | 
						|
	dm_gpio_free(dev, &priv->dat_desc);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct rtc_ops ht1380_rtc_ops = {
 | 
						|
	.get = ht1380_rtc_get,
 | 
						|
	.set = ht1380_rtc_set,
 | 
						|
};
 | 
						|
 | 
						|
static const struct udevice_id ht1380_rtc_ids[] = {
 | 
						|
	{ .compatible = "holtek,ht1380" },
 | 
						|
	{ }
 | 
						|
};
 | 
						|
 | 
						|
U_BOOT_DRIVER(rtc_ht1380) = {
 | 
						|
	.name = "rtc-ht1380",
 | 
						|
	.id = UCLASS_RTC,
 | 
						|
	.probe = ht1380_probe,
 | 
						|
	.remove = ht1380_remove,
 | 
						|
	.of_match = ht1380_rtc_ids,
 | 
						|
	.ops = &ht1380_rtc_ops,
 | 
						|
	.priv_auto = sizeof(struct ht1380_priv),
 | 
						|
};
 |