Dmitry Lifshitz 87791adc22 arm: omap: reset sata on boot ...

On OMAP platforms (like OMAP5) Linux kernel fails to detect a SATA
device if it is used by U-Boot.

It happens because U-Boot does not reset SATA controller before boot.

Reset the controller on OS boot so that Linux will have a clean state
to work with.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Reviewed-by: Tom Rini <trini@ti.com>

2015-01-05 15:13:47 -05:00

..

abb.c

replace DIV_ROUND with DIV_ROUND_CLOSEST

2014-11-20 11:28:25 -05:00

boot-common.c

arm: omap: reset sata on boot

2015-01-05 15:13:47 -05:00

clocks-common.c

ARM: OMAP4/5: Remove dead code against CONFIG_SYS_CLOCKS_ENABLE_ALL

2014-01-24 09:34:22 -05:00

emif-common.c

arm: omap-common: emif: allow to map memory without interleaving

2014-12-04 11:04:13 -05:00

hwinit-common.c

ARM: DRA: Enable VTT regulator

2014-08-25 10:48:13 -04:00

lowlevel_init.S

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

Makefile

am33xx/omap: Allow cache enable for all Sitara/OMAP

2014-06-11 16:25:39 -04:00

mem-common.c

ARM: omap: clean redundant PISMO_xx macros used in OMAP3

2014-07-25 16:26:12 -04:00

omap-cache.c

am33xx/omap: Allow cache enable for all Sitara/OMAP

2014-06-11 16:25:39 -04:00

pipe3-phy.c

ARM: OMAP5: Add Pipe3 PHY driver

2013-12-04 08:12:08 -05:00

pipe3-phy.h

ARM: OMAP5: Add Pipe3 PHY driver

2013-12-04 08:12:08 -05:00

reset.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

sata.c

OMAP5+: sata/scsi: implement scsi_bus_reset()

2015-01-05 15:13:46 -05:00

timer.c

omap-common/hwinit-common.c: timer_init() doesn't need to touch gd

2015-01-05 15:13:45 -05:00

u-boot-spl.lds

arm: Add missing .vectors section to linker scripts

2014-08-30 07:46:41 -04:00

utils.c

OMAP: common: consolidate fake USB ethernet MAC address creation

2014-04-17 14:39:54 -04:00

vc.c

ARM: OMAP4+: pmic: Make generic bus init and write functions

2013-06-10 08:43:09 -04:00