mirror of
				https://github.com/smaeul/u-boot.git
				synced 2025-11-03 21:48:15 +00:00 
			
		
		
		
	SOC can boot out of the device which is not accessible from APU and running this is detected as a warning, as the device is not accessible.For example getting below warning when the boot mode is OSPI and OSPI is not enabled in device tree. Invalid bus 0 (err=-19) Failed to initialize SPI flash at 0:0 (error -19) Ignoring the prioritization of the boot device which driver is not enabled and continue with the default boot_targets. Recommendation is to use custom boot_targets via environment file as is done for example for Kria via zynqmp_kria.env file. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/8b7cca5c7b84cb4854104e0c48f8aa63c4ec5ace.1715322156.git.michal.simek@amd.com
		
			
				
	
	
		
			339 lines
		
	
	
		
			7.1 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			339 lines
		
	
	
		
			7.1 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
// SPDX-License-Identifier: GPL-2.0+
 | 
						|
/*
 | 
						|
 * (C) Copyright 2014 - 2018 Xilinx, Inc.
 | 
						|
 * Michal Simek <michal.simek@amd.com>
 | 
						|
 */
 | 
						|
 | 
						|
#include <command.h>
 | 
						|
#include <cpu_func.h>
 | 
						|
#include <env.h>
 | 
						|
#include <fdtdec.h>
 | 
						|
#include <init.h>
 | 
						|
#include <env_internal.h>
 | 
						|
#include <log.h>
 | 
						|
#include <malloc.h>
 | 
						|
#include <time.h>
 | 
						|
#include <asm/cache.h>
 | 
						|
#include <asm/global_data.h>
 | 
						|
#include <asm/io.h>
 | 
						|
#include <asm/arch/hardware.h>
 | 
						|
#include <asm/arch/sys_proto.h>
 | 
						|
#include <dm/device.h>
 | 
						|
#include <dm/uclass.h>
 | 
						|
#include <versalpl.h>
 | 
						|
#include "../common/board.h"
 | 
						|
 | 
						|
DECLARE_GLOBAL_DATA_PTR;
 | 
						|
 | 
						|
#if defined(CONFIG_FPGA_VERSALPL)
 | 
						|
static xilinx_desc versalpl = {
 | 
						|
	xilinx_versal, csu_dma, 1, &versal_op, 0, &versal_op, NULL,
 | 
						|
	FPGA_LEGACY
 | 
						|
};
 | 
						|
#endif
 | 
						|
 | 
						|
int board_init(void)
 | 
						|
{
 | 
						|
	printf("EL Level:\tEL%d\n", current_el());
 | 
						|
 | 
						|
#if defined(CONFIG_FPGA_VERSALPL)
 | 
						|
	fpga_init();
 | 
						|
	fpga_add(fpga_xilinx, &versalpl);
 | 
						|
#endif
 | 
						|
 | 
						|
	if (CONFIG_IS_ENABLED(DM_I2C) && CONFIG_IS_ENABLED(I2C_EEPROM))
 | 
						|
		xilinx_read_eeprom();
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
int board_early_init_r(void)
 | 
						|
{
 | 
						|
	u32 val;
 | 
						|
 | 
						|
	if (current_el() != 3)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	debug("iou_switch ctrl div0 %x\n",
 | 
						|
	      readl(&crlapb_base->iou_switch_ctrl));
 | 
						|
 | 
						|
	writel(IOU_SWITCH_CTRL_CLKACT_BIT |
 | 
						|
	       (CONFIG_IOU_SWITCH_DIVISOR0 << IOU_SWITCH_CTRL_DIVISOR0_SHIFT),
 | 
						|
	       &crlapb_base->iou_switch_ctrl);
 | 
						|
 | 
						|
	/* Global timer init - Program time stamp reference clk */
 | 
						|
	val = readl(&crlapb_base->timestamp_ref_ctrl);
 | 
						|
	val |= CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT;
 | 
						|
	writel(val, &crlapb_base->timestamp_ref_ctrl);
 | 
						|
 | 
						|
	debug("ref ctrl 0x%x\n",
 | 
						|
	      readl(&crlapb_base->timestamp_ref_ctrl));
 | 
						|
 | 
						|
	/* Clear reset of timestamp reg */
 | 
						|
	writel(0, &crlapb_base->rst_timestamp);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Program freq register in System counter and
 | 
						|
	 * enable system counter.
 | 
						|
	 */
 | 
						|
	writel(CONFIG_COUNTER_FREQUENCY,
 | 
						|
	       &iou_scntr_secure->base_frequency_id_register);
 | 
						|
 | 
						|
	debug("counter val 0x%x\n",
 | 
						|
	      readl(&iou_scntr_secure->base_frequency_id_register));
 | 
						|
 | 
						|
	writel(IOU_SCNTRS_CONTROL_EN,
 | 
						|
	       &iou_scntr_secure->counter_control_register);
 | 
						|
 | 
						|
	debug("scntrs control 0x%x\n",
 | 
						|
	      readl(&iou_scntr_secure->counter_control_register));
 | 
						|
	debug("timer 0x%llx\n", get_ticks());
 | 
						|
	debug("timer 0x%llx\n", get_ticks());
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc,
 | 
						|
			 char *const argv[])
 | 
						|
{
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	if (current_el() > 1) {
 | 
						|
		smp_kick_all_cpus();
 | 
						|
		dcache_disable();
 | 
						|
		armv8_switch_to_el1(0x0, 0, 0, 0, (unsigned long)entry,
 | 
						|
				    ES_TO_AARCH64);
 | 
						|
	} else {
 | 
						|
		printf("FAIL: current EL is not above EL1\n");
 | 
						|
		ret = EINVAL;
 | 
						|
	}
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static u8 versal_get_bootmode(void)
 | 
						|
{
 | 
						|
	u8 bootmode;
 | 
						|
	u32 reg = 0;
 | 
						|
 | 
						|
	reg = readl(&crp_base->boot_mode_usr);
 | 
						|
 | 
						|
	if (reg >> BOOT_MODE_ALT_SHIFT)
 | 
						|
		reg >>= BOOT_MODE_ALT_SHIFT;
 | 
						|
 | 
						|
	bootmode = reg & BOOT_MODES_MASK;
 | 
						|
 | 
						|
	return bootmode;
 | 
						|
}
 | 
						|
 | 
						|
static int boot_targets_setup(void)
 | 
						|
{
 | 
						|
	u8 bootmode;
 | 
						|
	struct udevice *dev;
 | 
						|
	int bootseq = -1;
 | 
						|
	int bootseq_len = 0;
 | 
						|
	int env_targets_len = 0;
 | 
						|
	const char *mode = NULL;
 | 
						|
	char *new_targets;
 | 
						|
	char *env_targets;
 | 
						|
 | 
						|
	bootmode = versal_get_bootmode();
 | 
						|
 | 
						|
	puts("Bootmode: ");
 | 
						|
	switch (bootmode) {
 | 
						|
	case USB_MODE:
 | 
						|
		puts("USB_MODE\n");
 | 
						|
		mode = "usb_dfu0 usb_dfu1";
 | 
						|
		break;
 | 
						|
	case JTAG_MODE:
 | 
						|
		puts("JTAG_MODE\n");
 | 
						|
		mode = "jtag pxe dhcp";
 | 
						|
		break;
 | 
						|
	case QSPI_MODE_24BIT:
 | 
						|
		puts("QSPI_MODE_24\n");
 | 
						|
		if (uclass_get_device_by_name(UCLASS_SPI,
 | 
						|
					      "spi@f1030000", &dev)) {
 | 
						|
			debug("QSPI driver for QSPI device is not present\n");
 | 
						|
			break;
 | 
						|
		}
 | 
						|
		mode = "xspi0";
 | 
						|
		break;
 | 
						|
	case QSPI_MODE_32BIT:
 | 
						|
		puts("QSPI_MODE_32\n");
 | 
						|
		if (uclass_get_device_by_name(UCLASS_SPI,
 | 
						|
					      "spi@f1030000", &dev)) {
 | 
						|
			debug("QSPI driver for QSPI device is not present\n");
 | 
						|
			break;
 | 
						|
		}
 | 
						|
		mode = "xspi0";
 | 
						|
		break;
 | 
						|
	case OSPI_MODE:
 | 
						|
		puts("OSPI_MODE\n");
 | 
						|
		if (uclass_get_device_by_name(UCLASS_SPI,
 | 
						|
					      "spi@f1010000", &dev)) {
 | 
						|
			debug("OSPI driver for OSPI device is not present\n");
 | 
						|
			break;
 | 
						|
		}
 | 
						|
		mode = "xspi0";
 | 
						|
		break;
 | 
						|
	case EMMC_MODE:
 | 
						|
		puts("EMMC_MODE\n");
 | 
						|
		if (uclass_get_device_by_name(UCLASS_MMC,
 | 
						|
					      "mmc@f1050000", &dev) &&
 | 
						|
		    uclass_get_device_by_name(UCLASS_MMC,
 | 
						|
					      "sdhci@f1050000", &dev)) {
 | 
						|
			debug("SD1 driver for SD1 device is not present\n");
 | 
						|
			break;
 | 
						|
		}
 | 
						|
		debug("mmc1 device found at %p, seq %d\n", dev, dev_seq(dev));
 | 
						|
		mode = "mmc";
 | 
						|
		bootseq = dev_seq(dev);
 | 
						|
		break;
 | 
						|
	case SELECTMAP_MODE:
 | 
						|
		puts("SELECTMAP_MODE\n");
 | 
						|
		break;
 | 
						|
	case SD_MODE:
 | 
						|
		puts("SD_MODE\n");
 | 
						|
		if (uclass_get_device_by_name(UCLASS_MMC,
 | 
						|
					      "mmc@f1040000", &dev) &&
 | 
						|
		    uclass_get_device_by_name(UCLASS_MMC,
 | 
						|
					      "sdhci@f1040000", &dev)) {
 | 
						|
			debug("SD0 driver for SD0 device is not present\n");
 | 
						|
			break;
 | 
						|
		}
 | 
						|
		debug("mmc0 device found at %p, seq %d\n", dev, dev_seq(dev));
 | 
						|
 | 
						|
		mode = "mmc";
 | 
						|
		bootseq = dev_seq(dev);
 | 
						|
		break;
 | 
						|
	case SD1_LSHFT_MODE:
 | 
						|
		puts("LVL_SHFT_");
 | 
						|
		/* fall through */
 | 
						|
	case SD_MODE1:
 | 
						|
		puts("SD_MODE1\n");
 | 
						|
		if (uclass_get_device_by_name(UCLASS_MMC,
 | 
						|
					      "mmc@f1050000", &dev) &&
 | 
						|
		    uclass_get_device_by_name(UCLASS_MMC,
 | 
						|
					      "sdhci@f1050000", &dev)) {
 | 
						|
			debug("SD1 driver for SD1 device is not present\n");
 | 
						|
			break;
 | 
						|
		}
 | 
						|
		debug("mmc1 device found at %p, seq %d\n", dev, dev_seq(dev));
 | 
						|
 | 
						|
		mode = "mmc";
 | 
						|
		bootseq = dev_seq(dev);
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		printf("Invalid Boot Mode:0x%x\n", bootmode);
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	if (mode) {
 | 
						|
		if (bootseq >= 0) {
 | 
						|
			bootseq_len = snprintf(NULL, 0, "%i", bootseq);
 | 
						|
			debug("Bootseq len: %x\n", bootseq_len);
 | 
						|
		}
 | 
						|
 | 
						|
		/*
 | 
						|
		 * One terminating char + one byte for space between mode
 | 
						|
		 * and default boot_targets
 | 
						|
		 */
 | 
						|
		env_targets = env_get("boot_targets");
 | 
						|
		if (env_targets)
 | 
						|
			env_targets_len = strlen(env_targets);
 | 
						|
 | 
						|
		new_targets = calloc(1, strlen(mode) + env_targets_len + 2 +
 | 
						|
				     bootseq_len);
 | 
						|
		if (!new_targets)
 | 
						|
			return -ENOMEM;
 | 
						|
 | 
						|
		if (bootseq >= 0)
 | 
						|
			sprintf(new_targets, "%s%x %s", mode, bootseq,
 | 
						|
				env_targets ? env_targets : "");
 | 
						|
		else
 | 
						|
			sprintf(new_targets, "%s %s", mode,
 | 
						|
				env_targets ? env_targets : "");
 | 
						|
 | 
						|
		env_set("boot_targets", new_targets);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
int board_late_init(void)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (!(gd->flags & GD_FLG_ENV_DEFAULT)) {
 | 
						|
		debug("Saved variables - Skipping\n");
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	if (!IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	if (IS_ENABLED(CONFIG_DISTRO_DEFAULTS)) {
 | 
						|
		ret = boot_targets_setup();
 | 
						|
		if (ret)
 | 
						|
			return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	return board_late_init_xilinx();
 | 
						|
}
 | 
						|
 | 
						|
int dram_init_banksize(void)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = fdtdec_setup_memory_banksize();
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	mem_map_fill();
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
int dram_init(void)
 | 
						|
{
 | 
						|
	if (fdtdec_setup_mem_size_base_lowest() != 0)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
void reset_cpu(void)
 | 
						|
{
 | 
						|
}
 | 
						|
 | 
						|
#if defined(CONFIG_ENV_IS_NOWHERE)
 | 
						|
enum env_location env_get_location(enum env_operation op, int prio)
 | 
						|
{
 | 
						|
	u32 bootmode = versal_get_bootmode();
 | 
						|
 | 
						|
	if (prio)
 | 
						|
		return ENVL_UNKNOWN;
 | 
						|
 | 
						|
	switch (bootmode) {
 | 
						|
	case EMMC_MODE:
 | 
						|
	case SD_MODE:
 | 
						|
	case SD1_LSHFT_MODE:
 | 
						|
	case SD_MODE1:
 | 
						|
		if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))
 | 
						|
			return ENVL_FAT;
 | 
						|
		if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4))
 | 
						|
			return ENVL_EXT4;
 | 
						|
		return ENVL_NOWHERE;
 | 
						|
	case OSPI_MODE:
 | 
						|
	case QSPI_MODE_24BIT:
 | 
						|
	case QSPI_MODE_32BIT:
 | 
						|
		if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))
 | 
						|
			return ENVL_SPI_FLASH;
 | 
						|
		return ENVL_NOWHERE;
 | 
						|
	case JTAG_MODE:
 | 
						|
	case SELECTMAP_MODE:
 | 
						|
	default:
 | 
						|
		return ENVL_NOWHERE;
 | 
						|
	}
 | 
						|
}
 | 
						|
#endif
 |