Przemyslaw Marczak 56b34bc617 mmc: sdhci: Avoid commands errors by simple timeout adaptation. ...

Old command timeout value was too small and it caused I/O errors which
led to uncompleted read/write/erase operations and filesystem errors.
Timeout adaptation fixes this issue.

Changes in sdhci_send_command() function:
- change timeout variable to static
- increase default command timeout to 100 ms
- add definition of max command timeout value,
  which can be redefined in each board config file
- wait for card ready state for max defined time
  if it doesn't exceed defined maximum or return COMM_ERR

Once successfully increased timeout value will be used in next function
call. This fix was tested on Goni, Trats, Trats2 boards by testing UMS
on MMC storage.

Changes v2:
- move global variable cmd_timeout into function sdhci_send_command()
- change condition "==" to ">=" when comparing time with timeout
- print information about timeout increasing and card busy timeout

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>

2013-10-31 09:55:33 +02:00

..

arm_pl180_mmci.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

arm_pl180_mmci.h

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

bcm2835_sdhci.c

ARM: bcm2835: fix get_timer() to return ms

2013-04-04 08:14:54 +02:00

bfin_sdh.c

Merge u-boot/master into u-boot-ti/master

2013-03-11 12:16:13 -04:00

davinci_mmc.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

dw_mmc.c

mmc: dw_mmc: change the callback function name.

2013-10-31 09:55:33 +02:00

exynos_dw_mmc.c

mmc: dw_mmc: change the callback function name.

2013-10-31 09:55:33 +02:00

fsl_esdhc_spl.c

SPDX-License-Identifier: clean up license header

2013-08-20 10:15:37 -07:00

fsl_esdhc.c

mmc: fsl_esdhc: Check the result from malloc()

2013-09-20 17:55:36 +02:00

ftsdc010_mci.c

Merge branch 'master' of git://git.denx.de/u-boot-nds32

2013-07-25 08:51:51 -04:00

gen_atmel_mci.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

Makefile

mmc: don't support write & erase for SPL builds

2013-09-20 18:58:55 +03:00

mmc_private.h

mmc: don't support write & erase for SPL builds

2013-09-20 18:58:55 +03:00

mmc_spi.c

mmc: add support for write protection

2013-03-08 16:41:13 -05:00

mmc_write.c

mmc: don't support write & erase for SPL builds

2013-09-20 18:58:55 +03:00

mmc.c

mmc: Fix erase_grp_size for partitioned card

2013-10-31 09:55:33 +02:00

mv_sdhci.c

mmc: sdhci: return error when failed add_sdhci().

2013-05-06 16:26:24 -05:00

mxcmmc.c

mmc: add support for write protection

2013-03-08 16:41:13 -05:00

mxsmmc.c

mmc: mxsmmc: Enable MMC HC support

2013-08-23 15:53:21 +02:00

omap_hsmmc.c

ARM: OMAP: Enable 8-bit eMMC access for OMAP4/5/DRA7xx

2013-09-17 20:03:44 +03:00

pxa_mmc_gen.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

pxa_mmc.h

pxa: move mmc drivers to drivers/mmc

2009-02-20 03:47:50 +01:00

s5p_sdhci.c

mmc: sdhci: use the SDHCI_QUIRK_USE_WIDE8 for samsung SoC

2013-09-17 20:03:43 +03:00

sdhci.c

mmc: sdhci: Avoid commands errors by simple timeout adaptation.

2013-10-31 09:55:33 +02:00

sh_mmcif.c

mmc: add support for write protection

2013-03-08 16:41:13 -05:00

sh_mmcif.h

mmc: sh_mmcif: add support for Renesas MMCIF

2011-07-15 20:29:21 -05:00

spear_sdhci.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

tegra_mmc.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

zynq_sdhci.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00