mirror of
https://github.com/smaeul/u-boot.git
synced 2025-10-30 19:48:19 +00:00
8bde7f776c
- remove trailing white space, trailing empty lines, C++ comments, etc.
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
* Patches by Kenneth Johansson, 25 Jun 2003:
- major rework of command structure
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
85 lines
1.9 KiB
Plaintext
85 lines
1.9 KiB
Plaintext
|
|
Summary:
|
|
========
|
|
|
|
This file contains information about the cmi board configuration.
|
|
Please see cmi_mpc5xx_config for further details. The cmi board is
|
|
a customer specific board but should work with small modifications
|
|
on every board which has a MPC5xx and either a 28F128J3A,
|
|
28F320J3A or 28F640J3A Intel flash mounted.
|
|
|
|
Board Discription:
|
|
==================
|
|
|
|
* Motorola MPC555
|
|
* RS232 connection
|
|
* Intel flash 28F640J3A
|
|
* Micron SRAM 1M
|
|
* Altera PLD
|
|
|
|
Bootstrap:
|
|
==========
|
|
|
|
In contrast to the usual boot sequence used in U-Boot, on the
|
|
cmi board we don't boot from the external flash directly.
|
|
Because of we use a 16-bit flash and don't sample a RCW
|
|
from the data bus to set the startup buswidth to 16-bit.
|
|
Unfortunatly the default width, sampled from the default RCW
|
|
is 32-bit. For this reason we burn the proper RCW into the
|
|
internal flash shadow location and boot after power-on or
|
|
reset from the internal flash and then branch to 0x02000100
|
|
where the U-Boot reset vector handler is located.
|
|
|
|
Memory Map:
|
|
===========
|
|
|
|
Memory Map after relocation:
|
|
|
|
0x0000 0000 CFG_SDRAM_BASE
|
|
:
|
|
0x000F 9FFF
|
|
:
|
|
:
|
|
0x0100 0000 CFG_IMMR (Internal memory map base adress)
|
|
:
|
|
0x0130 7FFF
|
|
:
|
|
:
|
|
0x0200 0000 CFG_FLASH_BASE
|
|
:
|
|
0x027C FFFF
|
|
:
|
|
:
|
|
0x0300 0000 PLD_BASE
|
|
|
|
Flash Partition:
|
|
|
|
0x0200 0000 Block 0 and 1 contain U-Boot except
|
|
: environment
|
|
:
|
|
0x0201 FFFF
|
|
0x0202 0000 Block 2 contains environment (.ppcenv)
|
|
:
|
|
0x0202 FFFF
|
|
|
|
See README file for futher information about U-Boot relocation
|
|
and partitioning.
|
|
|
|
Tested Features:
|
|
================
|
|
|
|
* U-Boot commands: go, loads, loadb, all memory features, printenv,
|
|
setenv, saveenv, protect, erase, fli, bdi, mtest, reset, version,
|
|
coninfo, help (see configuration file for available commands)
|
|
|
|
* Blinking led to indicate boot process
|
|
|
|
Added or Changed Files:
|
|
=======================
|
|
|
|
u-boot-0.2.0/board/cmi/*
|
|
u-boot-0.2.0/include/configs/cmi_mpc5xx.h
|
|
|
|
Regards,
|
|
Martin
|