mirror of
https://github.com/smaeul/u-boot.git
synced 2025-10-25 18:18:19 +01:00
d937326ffc
Commit 643aae1406c93ddc64fcf8c136b47cdffd9c8ccd deleted include/linux/config.h but missed to delete _LINUX_CONFIG_H macro. It is no longer used at all. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
197 lines
6.4 KiB
ArmAsm
197 lines
6.4 KiB
ArmAsm
/*
|
|
* SPDX-License-Identifier: GPL-2.0 IBM-pibs
|
|
*/
|
|
#include <config.h>
|
|
#include <asm/ppc4xx.h>
|
|
|
|
#include <ppc_asm.tmpl>
|
|
#include <ppc_defs.h>
|
|
|
|
#include <asm/cache.h>
|
|
#include <asm/mmu.h>
|
|
|
|
#define LI32(reg,val) \
|
|
addis reg,0,val@h;\
|
|
ori reg,reg,val@l
|
|
|
|
#define WDCR_EBC(reg,val) \
|
|
addi r4,0,reg;\
|
|
mtdcr EBC0_CFGADDR,r4;\
|
|
addis r4,0,val@h;\
|
|
ori r4,r4,val@l;\
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
#define WDCR_SDRAM(reg,val) \
|
|
addi r4,0,reg;\
|
|
mtdcr SDRAM0_CFGADDR,r4;\
|
|
addis r4,0,val@h;\
|
|
ori r4,r4,val@l;\
|
|
mtdcr SDRAM0_CFGDATA,r4
|
|
|
|
/******************************************************************************
|
|
* Function: ext_bus_cntlr_init
|
|
*
|
|
* Description: Configures EBC Controller and a few basic chip selects.
|
|
*
|
|
* CS0 is setup to get the Boot Flash out of the addresss range
|
|
* so that we may setup a stack. CS7 is setup so that we can
|
|
* access and reset the hardware watchdog.
|
|
*
|
|
* IMPORTANT: For pass1 this code must run from
|
|
* cache since you can not reliably change a peripheral banks
|
|
* timing register (pbxap) while running code from that bank.
|
|
* For ex., since we are running from ROM on bank 0, we can NOT
|
|
* execute the code that modifies bank 0 timings from ROM, so
|
|
* we run it from cache.
|
|
*
|
|
* Notes: Does NOT use the stack.
|
|
*****************************************************************************/
|
|
.section ".text"
|
|
.align 2
|
|
.globl ext_bus_cntlr_init
|
|
.type ext_bus_cntlr_init, @function
|
|
ext_bus_cntlr_init:
|
|
mflr r0
|
|
/********************************************************************
|
|
* Prefetch entire ext_bus_cntrl_init function into the icache.
|
|
* This is necessary because we are going to change the same CS we
|
|
* are executing from. Otherwise a CPU lockup may occur.
|
|
*******************************************************************/
|
|
bl ..getAddr
|
|
..getAddr:
|
|
mflr r3 /* get address of ..getAddr */
|
|
|
|
/* Calculate number of cache lines for this function */
|
|
addi r4, 0, (((.Lfe0 - ..getAddr) / CONFIG_SYS_CACHELINE_SIZE) + 2)
|
|
mtctr r4
|
|
..ebcloop:
|
|
icbt r0, r3 /* prefetch cache line for addr in r3*/
|
|
addi r3, r3, CONFIG_SYS_CACHELINE_SIZE /* move to next cache line */
|
|
bdnz ..ebcloop /* continue for $CTR cache lines */
|
|
|
|
/********************************************************************
|
|
* Delay to ensure all accesses to ROM are complete before changing
|
|
* bank 0 timings. 200usec should be enough.
|
|
* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles.
|
|
*******************************************************************/
|
|
addis r3, 0, 0x0
|
|
ori r3, r3, 0xA000 /* wait 200us from reset */
|
|
mtctr r3
|
|
..spinlp:
|
|
bdnz ..spinlp /* spin loop */
|
|
|
|
/********************************************************************
|
|
* SETUP CPC0_CR0
|
|
*******************************************************************/
|
|
LI32(r4, 0x007000c0)
|
|
mtdcr CPC0_CR0, r4
|
|
|
|
/********************************************************************
|
|
* Setup CPC0_CR1: Change PCIINT signal to PerWE
|
|
*******************************************************************/
|
|
mfdcr r4, CPC0_CR1
|
|
ori r4, r4, 0x4000
|
|
mtdcr CPC0_CR1, r4
|
|
|
|
/********************************************************************
|
|
* Setup External Bus Controller (EBC).
|
|
*******************************************************************/
|
|
WDCR_EBC(EBC0_CFG, 0xd84c0000)
|
|
/********************************************************************
|
|
* Memory Bank 0 (Intel 28F128J3 Flash) initialization
|
|
*******************************************************************/
|
|
/*WDCR_EBC(PB1AP, 0x02869200)*/
|
|
WDCR_EBC(PB1AP, 0x07869200)
|
|
WDCR_EBC(PB0CR, 0xfe0bc000)
|
|
/********************************************************************
|
|
* Memory Bank 1 (Holtek HT6542B PS/2) initialization
|
|
*******************************************************************/
|
|
WDCR_EBC(PB1AP, 0x1f869200)
|
|
WDCR_EBC(PB1CR, 0xf0818000)
|
|
/********************************************************************
|
|
* Memory Bank 2 (Epson S1D13506) initialization
|
|
*******************************************************************/
|
|
WDCR_EBC(PB2AP, 0x05860300)
|
|
WDCR_EBC(PB2CR, 0xf045a000)
|
|
/********************************************************************
|
|
* Memory Bank 3 (Philips SJA1000 CAN Controllers) initialization
|
|
*******************************************************************/
|
|
WDCR_EBC(PB3AP, 0x0387d200)
|
|
WDCR_EBC(PB3CR, 0xf021c000)
|
|
/********************************************************************
|
|
* Memory Bank 4-7 (Unused) initialization
|
|
*******************************************************************/
|
|
WDCR_EBC(PB4AP, 0)
|
|
WDCR_EBC(PB4CR, 0)
|
|
WDCR_EBC(PB5AP, 0)
|
|
WDCR_EBC(PB5CR, 0)
|
|
WDCR_EBC(PB6AP, 0)
|
|
WDCR_EBC(PB6CR, 0)
|
|
WDCR_EBC(PB7AP, 0)
|
|
WDCR_EBC(PB7CR, 0)
|
|
|
|
/* We are all done */
|
|
mtlr r0 /* Restore link register */
|
|
blr /* Return to calling function */
|
|
.Lfe0: .size ext_bus_cntlr_init,.Lfe0-ext_bus_cntlr_init
|
|
/* end ext_bus_cntlr_init() */
|
|
|
|
/******************************************************************************
|
|
* Function: sdram_init
|
|
*
|
|
* Description: Configures SDRAM memory banks.
|
|
*
|
|
* Notes: Does NOT use the stack.
|
|
*****************************************************************************/
|
|
.section ".text"
|
|
.align 2
|
|
.globl sdram_init
|
|
.type sdram_init, @function
|
|
sdram_init:
|
|
|
|
/*
|
|
* Disable memory controller to allow
|
|
* values to be changed.
|
|
*/
|
|
WDCR_SDRAM(SDRAM0_CFG, 0x00000000)
|
|
|
|
/*
|
|
* Configure Memory Banks
|
|
*/
|
|
WDCR_SDRAM(SDRAM0_B0CR, 0x00084001)
|
|
WDCR_SDRAM(SDRAM0_B1CR, 0x00000000)
|
|
WDCR_SDRAM(SDRAM0_B2CR, 0x00000000)
|
|
WDCR_SDRAM(SDRAM0_B3CR, 0x00000000)
|
|
|
|
/*
|
|
* Set up SDTR1 (SDRAM Timing Register)
|
|
*/
|
|
WDCR_SDRAM(SDRAM0_TR, 0x00854009)
|
|
|
|
/*
|
|
* Set RTR (Refresh Timing Register)
|
|
*/
|
|
WDCR_SDRAM(SDRAM0_RTR, 0x10000000)
|
|
/* WDCR_SDRAM(SDRAM0_RTR, 0x05f00000) */
|
|
|
|
/********************************************************************
|
|
* Delay to ensure 200usec have elapsed since reset. Assume worst
|
|
* case that the core is running 200Mhz:
|
|
* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
|
|
*******************************************************************/
|
|
addis r3, 0, 0x0000
|
|
ori r3, r3, 0xA000 /* Wait >200us from reset */
|
|
mtctr r3
|
|
..spinlp2:
|
|
bdnz ..spinlp2 /* spin loop */
|
|
|
|
/********************************************************************
|
|
* Set memory controller options reg, MCOPT1.
|
|
*******************************************************************/
|
|
WDCR_SDRAM(SDRAM0_CFG,0x80800000)
|
|
|
|
..sdri_done:
|
|
blr /* Return to calling function */
|
|
.Lfe1: .size sdram_init,.Lfe1-sdram_init
|
|
/* end sdram_init() */
|