mirror of
https://github.com/smaeul/u-boot.git
synced 2025-11-04 05:50:17 +00:00
4e2ccca26d
This patch adds default eth pinctrl for all boards. There are two pinctrl nodes used for two scenarios: ephy_iot_mode - for IOT boards which have only one port (PHY0) ephy_router_mode - For routers which have more than one ports Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
130 lines
2.2 KiB
Plaintext
130 lines
2.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 Stefan Roese <sr@denx.de>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "mt7628a.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
compatible = "gardena,smart-gateway-mt7688", "ralink,mt7628a-soc";
|
|
model = "GARDENA smart Gateway (MT7688)";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
spi0 = &spi0;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x08000000>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
power_blue {
|
|
label = "smartgw:power:blue";
|
|
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
power_green {
|
|
label = "smartgw:power:green";
|
|
gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
power_red {
|
|
label = "smartgw:power:red";
|
|
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
radio_blue {
|
|
label = "smartgw:radio:blue";
|
|
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
radio_green {
|
|
label = "smartgw:radio:green";
|
|
gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
radio_red {
|
|
label = "smartgw:radio:red";
|
|
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
internet_blue {
|
|
label = "smartgw:internet:blue";
|
|
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
internet_green {
|
|
label = "smartgw:internet:green";
|
|
gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
internet_red {
|
|
label = "smartgw:internet:red";
|
|
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart0;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
state_default: pin_state {
|
|
p0led {
|
|
groups = "p0led_a";
|
|
function = "led";
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
num-cs = <2>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_dual_pins>;
|
|
|
|
spi-flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
spi-max-frequency = <40000000>;
|
|
reg = <0>;
|
|
};
|
|
|
|
spi-nand@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "spi-nand";
|
|
spi-max-frequency = <40000000>;
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
ð {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ephy_iot_mode>;
|
|
mediatek,poll-link-phy = <0>;
|
|
};
|