mirror of
https://github.com/smaeul/u-boot.git
synced 2025-10-31 03:58:17 +00:00
8b0bfc6804
Add support for Analogue & Micro Rattler boards. Tested on Rattler8248. * Patch by Andre Renaud, 08 Nov 2004: Fix watchdog support in common/lcd.c * Patch by Marc Leeman, 05 Nov 2003: Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU bug only affects the XPC8245 processors
418 lines
14 KiB
C
418 lines
14 KiB
C
/*
|
|
* (C) Copyright 2000
|
|
* Rob Taylor. Flying Pig Systems. robt@flyingpig.com.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <mpc824x.h>
|
|
|
|
#ifndef CFG_BANK0_ROW
|
|
#define CFG_BANK0_ROW 0
|
|
#endif
|
|
#ifndef CFG_BANK1_ROW
|
|
#define CFG_BANK1_ROW 0
|
|
#endif
|
|
#ifndef CFG_BANK2_ROW
|
|
#define CFG_BANK2_ROW 0
|
|
#endif
|
|
#ifndef CFG_BANK3_ROW
|
|
#define CFG_BANK3_ROW 0
|
|
#endif
|
|
#ifndef CFG_BANK4_ROW
|
|
#define CFG_BANK4_ROW 0
|
|
#endif
|
|
#ifndef CFG_BANK5_ROW
|
|
#define CFG_BANK5_ROW 0
|
|
#endif
|
|
#ifndef CFG_BANK6_ROW
|
|
#define CFG_BANK6_ROW 0
|
|
#endif
|
|
#ifndef CFG_BANK7_ROW
|
|
#define CFG_BANK7_ROW 0
|
|
#endif
|
|
#ifndef CFG_DBUS_SIZE2
|
|
#define CFG_DBUS_SIZE2 0
|
|
#endif
|
|
|
|
/*
|
|
* Breath some life into the CPU...
|
|
*
|
|
* Set up the memory map,
|
|
* initialize a bunch of registers,
|
|
*/
|
|
void
|
|
cpu_init_f (void)
|
|
{
|
|
/* MOUSSE board is initialized in asm */
|
|
#if !defined(CONFIG_MOUSSE) && !defined(CONFIG_BMW)
|
|
register unsigned long val;
|
|
CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/
|
|
/* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/
|
|
|
|
#if defined(CONFIG_MUSENKI) || defined(CONFIG_PN62)
|
|
/* Why is this here, you ask? Try, just try setting 0x8000
|
|
* in PCIACR with CONFIG_WRITE_HALFWORD()
|
|
* this one was a stumper, and we are annoyed
|
|
*/
|
|
|
|
#define M_CONFIG_WRITE_HALFWORD( addr, data ) \
|
|
__asm__ __volatile__(" \
|
|
stw %2,0(%0)\n \
|
|
sync\n \
|
|
sth %3,2(%1)\n \
|
|
sync\n \
|
|
" \
|
|
: /* no output */ \
|
|
: "r" (CONFIG_ADDR), "r" (CONFIG_DATA), \
|
|
"r" (PCISWAP(addr & ~3)), "r" (PCISWAP(data << 16)) \
|
|
);
|
|
|
|
M_CONFIG_WRITE_HALFWORD(PCIACR, 0x8000);
|
|
#endif
|
|
|
|
CONFIG_WRITE_BYTE(PCLSR, 0x8); /* set PCI cache line size */
|
|
CONFIG_WRITE_BYTE (PLTR, 0x40); /* set PCI latency timer */
|
|
/*
|
|
* Note that although this bit is cleared after a hard reset, it
|
|
* must be explicitly set and then cleared by software during
|
|
* initialization in order to guarantee correct operation of the
|
|
* DLL and the SDRAM_CLK[0:3] signals (if they are used).
|
|
*/
|
|
CONFIG_READ_BYTE (AMBOR, val);
|
|
CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
|
|
CONFIG_WRITE_BYTE(AMBOR, val | 0x20);
|
|
CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
|
|
#ifdef CONFIG_MPC8245
|
|
/* silicon bug 28 MPC8245 */
|
|
CONFIG_READ_BYTE(AMBOR,val);
|
|
CONFIG_WRITE_BYTE(AMBOR,val|0x1);
|
|
|
|
#if 0
|
|
/*
|
|
* The following bug only affects older (XPC8245) processors.
|
|
* DMA transfers initiated by external devices get corrupted due
|
|
* to a hardware scheduling problem.
|
|
*
|
|
* The effect is:
|
|
* when transferring X words, the first 32 words are transferred
|
|
* OK, the next 3 x 32 words are 'old' data (from previous DMA)
|
|
* while the rest of the X words is xferred fine.
|
|
*
|
|
* Disabling 3 of the 4 32 word hardware buffers solves the problem
|
|
* with no significant performance loss.
|
|
*/
|
|
|
|
CONFIG_READ_BYTE(PCMBCR,val);
|
|
/* in order not to corrupt data which is being read over the PCI bus
|
|
* with the PPC as slave, we need to reduce the number of PCMRBs to 1,
|
|
* 4.11 in the processor user manual
|
|
* */
|
|
|
|
#if 1
|
|
CONFIG_WRITE_BYTE(PCMBCR,(val|0xC0)); /* 1 PCMRB */
|
|
#else
|
|
CONFIG_WRITE_BYTE(PCMBCR,(val|0x80)); /* 2 PCMRBs */
|
|
CONFIG_WRITE_BYTE(PCMBCR,(val|0x40)); /* 3 PCMRBs */
|
|
/* default, 4 PCMRBs are used */
|
|
#endif
|
|
#endif
|
|
#endif
|
|
|
|
CONFIG_READ_WORD(PICR1, val);
|
|
#if defined(CONFIG_MPC8240)
|
|
CONFIG_WRITE_WORD( PICR1,
|
|
(val & (PICR1_ADDRESS_MAP | PICR1_RCS0)) |
|
|
PIRC1_MSK | PICR1_PROC_TYPE_603E |
|
|
PICR1_FLASH_WR_EN | PICR1_MCP_EN |
|
|
PICR1_CF_DPARK | PICR1_EN_PCS |
|
|
PICR1_CF_APARK );
|
|
#elif defined(CONFIG_MPC8245)
|
|
CONFIG_WRITE_WORD( PICR1,
|
|
(val & (PICR1_RCS0)) |
|
|
PICR1_PROC_TYPE_603E |
|
|
PICR1_FLASH_WR_EN | PICR1_MCP_EN |
|
|
PICR1_CF_DPARK | PICR1_NO_BUSW_CK |
|
|
PICR1_DEC| PICR1_CF_APARK | 0x10); /* 8245 UM says bit 4 must be set */
|
|
#else
|
|
#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
|
|
#endif
|
|
|
|
CONFIG_READ_WORD(PICR2, val);
|
|
val= val & ~ (PICR2_CF_SNOOP_WS_MASK | PICR2_CF_APHASE_WS_MASK); /*mask off waitstate bits*/
|
|
#ifndef CONFIG_PN62
|
|
val |= PICR2_CF_SNOOP_WS_1WS | PICR2_CF_APHASE_WS_1WS; /*1 wait state*/
|
|
#endif
|
|
CONFIG_WRITE_WORD(PICR2, val);
|
|
|
|
CONFIG_WRITE_WORD(EUMBBAR, CFG_EUMB_ADDR);
|
|
#ifndef CFG_RAMBOOT
|
|
CONFIG_WRITE_WORD(MCCR1, (CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) |
|
|
(CFG_BANK0_ROW) |
|
|
(CFG_BANK1_ROW << MCCR1_BANK1ROW_SHIFT) |
|
|
(CFG_BANK2_ROW << MCCR1_BANK2ROW_SHIFT) |
|
|
(CFG_BANK3_ROW << MCCR1_BANK3ROW_SHIFT) |
|
|
(CFG_BANK4_ROW << MCCR1_BANK4ROW_SHIFT) |
|
|
(CFG_BANK5_ROW << MCCR1_BANK5ROW_SHIFT) |
|
|
(CFG_BANK6_ROW << MCCR1_BANK6ROW_SHIFT) |
|
|
(CFG_BANK7_ROW << MCCR1_BANK7ROW_SHIFT) |
|
|
(CFG_ROMFAL << MCCR1_ROMFAL_SHIFT));
|
|
#endif
|
|
|
|
#if defined(CFG_ASRISE) && defined(CFG_ASFALL)
|
|
CONFIG_WRITE_WORD(MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT |
|
|
CFG_ASRISE << MCCR2_ASRISE_SHIFT |
|
|
CFG_ASFALL << MCCR2_ASFALL_SHIFT);
|
|
#else
|
|
CONFIG_WRITE_WORD(MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT);
|
|
#endif
|
|
|
|
#if defined(CONFIG_MPC8240)
|
|
CONFIG_WRITE_WORD(MCCR3,
|
|
(((CFG_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
|
|
(CFG_REFREC << MCCR3_REFREC_SHIFT) |
|
|
(CFG_RDLAT << MCCR3_RDLAT_SHIFT));
|
|
#elif defined(CONFIG_MPC8245)
|
|
CONFIG_WRITE_WORD(MCCR3,
|
|
(((CFG_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
|
|
(CFG_REFREC << MCCR3_REFREC_SHIFT));
|
|
#else
|
|
#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
|
|
#endif
|
|
|
|
/* this is gross. We think these should all be the same, and various boards
|
|
* should define CFG_ACTORW to 0 if they don't want to set it, or even, if
|
|
* its not set, we define it to zero in this file
|
|
*/
|
|
#if defined(CONFIG_CU824) || defined(CONFIG_PN62)
|
|
CONFIG_WRITE_WORD(MCCR4,
|
|
(CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) |
|
|
(CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
|
|
MCCR4_BIT21 |
|
|
(CFG_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
|
|
((CFG_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
|
|
(((CFG_SDMODE_CAS_LAT <<4) | (CFG_SDMODE_WRAP <<3) |
|
|
CFG_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) |
|
|
(CFG_ACTORW << MCCR4_ACTTORW_SHIFT) |
|
|
(((CFG_BSTOPRE & 0x03c0) >> 6) << MCCR4_BSTOPRE6TO9_SHIFT));
|
|
#elif defined(CONFIG_MPC8240)
|
|
CONFIG_WRITE_WORD(MCCR4,
|
|
(CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) |
|
|
(CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
|
|
MCCR4_BIT21 |
|
|
(CFG_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
|
|
((CFG_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
|
|
(((CFG_SDMODE_CAS_LAT <<4) | (CFG_SDMODE_WRAP <<3) |
|
|
(CFG_SDMODE_BURSTLEN)) <<MCCR4_SDMODE_SHIFT) |
|
|
(((CFG_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
|
|
#elif defined(CONFIG_MPC8245)
|
|
CONFIG_READ_WORD(MCCR1, val);
|
|
val &= MCCR1_DBUS_SIZE0; /* test for 64-bit mem bus */
|
|
|
|
CONFIG_WRITE_WORD(MCCR4,
|
|
(CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) |
|
|
(CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
|
|
(CFG_EXTROM ? MCCR4_EXTROM : 0) |
|
|
(CFG_REGDIMM ? MCCR4_REGDIMM : 0) |
|
|
(CFG_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
|
|
((CFG_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
|
|
(CFG_DBUS_SIZE2 << MCCR4_DBUS_SIZE2_SHIFT) |
|
|
(((CFG_SDMODE_CAS_LAT <<4) | (CFG_SDMODE_WRAP <<3) |
|
|
(val ? 2 : 3)) << MCCR4_SDMODE_SHIFT) |
|
|
(CFG_ACTORW << MCCR4_ACTTORW_SHIFT) |
|
|
(((CFG_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
|
|
#else
|
|
#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
|
|
#endif
|
|
|
|
CONFIG_WRITE_WORD(MSAR1,
|
|
( (CFG_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
|
|
(((CFG_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
|
|
(((CFG_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
|
|
(((CFG_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
|
|
CONFIG_WRITE_WORD(EMSAR1,
|
|
( (CFG_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
|
|
(((CFG_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
|
|
(((CFG_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
|
|
(((CFG_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
|
|
CONFIG_WRITE_WORD(MSAR2,
|
|
( (CFG_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
|
|
(((CFG_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
|
|
(((CFG_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
|
|
(((CFG_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
|
|
CONFIG_WRITE_WORD(EMSAR2,
|
|
( (CFG_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
|
|
(((CFG_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
|
|
(((CFG_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
|
|
(((CFG_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
|
|
CONFIG_WRITE_WORD(MEAR1,
|
|
( (CFG_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
|
|
(((CFG_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
|
|
(((CFG_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
|
|
(((CFG_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
|
|
CONFIG_WRITE_WORD(EMEAR1,
|
|
( (CFG_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
|
|
(((CFG_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
|
|
(((CFG_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
|
|
(((CFG_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
|
|
CONFIG_WRITE_WORD(MEAR2,
|
|
( (CFG_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
|
|
(((CFG_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
|
|
(((CFG_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
|
|
(((CFG_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
|
|
CONFIG_WRITE_WORD(EMEAR2,
|
|
( (CFG_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
|
|
(((CFG_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
|
|
(((CFG_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
|
|
(((CFG_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
|
|
|
|
CONFIG_WRITE_BYTE(ODCR, CFG_ODCR);
|
|
#ifdef CFG_DLL_MAX_DELAY
|
|
CONFIG_WRITE_BYTE(MIOCR1, CFG_DLL_MAX_DELAY); /* needed to make DLL lock */
|
|
#endif
|
|
#if defined(CFG_DLL_EXTEND) && defined(CFG_PCI_HOLD_DEL)
|
|
CONFIG_WRITE_BYTE(PMCR2, CFG_DLL_EXTEND | CFG_PCI_HOLD_DEL);
|
|
#endif
|
|
#if defined(MIOCR2) && defined(CFG_SDRAM_DSCD)
|
|
CONFIG_WRITE_BYTE(MIOCR2, CFG_SDRAM_DSCD); /* change memory input */
|
|
#endif /* setup & hold time */
|
|
|
|
CONFIG_WRITE_BYTE(MBER,
|
|
CFG_BANK0_ENABLE |
|
|
(CFG_BANK1_ENABLE << 1) |
|
|
(CFG_BANK2_ENABLE << 2) |
|
|
(CFG_BANK3_ENABLE << 3) |
|
|
(CFG_BANK4_ENABLE << 4) |
|
|
(CFG_BANK5_ENABLE << 5) |
|
|
(CFG_BANK6_ENABLE << 6) |
|
|
(CFG_BANK7_ENABLE << 7));
|
|
|
|
#ifdef CFG_PGMAX
|
|
CONFIG_WRITE_BYTE(MPMR, CFG_PGMAX);
|
|
#endif
|
|
|
|
/* ! Wait 200us before initialize other registers */
|
|
/*FIXME: write a decent udelay wait */
|
|
__asm__ __volatile__(
|
|
" mtctr %0 \n \
|
|
0: bdnz 0b\n"
|
|
:
|
|
: "r" (0x10000));
|
|
|
|
CONFIG_READ_WORD(MCCR1, val);
|
|
CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */
|
|
__asm__ __volatile__("eieio");
|
|
|
|
#endif /* !CONFIG_MOUSSE && !CONFIG_BMW */
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_MOUSSE
|
|
#ifdef INCLUDE_MPC107_REPORT
|
|
struct MPC107_s {
|
|
unsigned int iobase;
|
|
char desc[120];
|
|
} MPC107Regs[] = {
|
|
{ BMC_BASE + 0x00, "MPC107 Vendor/Device ID" },
|
|
{ BMC_BASE + 0x04, "MPC107 PCI Command/Status Register" },
|
|
{ BMC_BASE + 0x08, "MPC107 Revision" },
|
|
{ BMC_BASE + 0x0C, "MPC107 Cache Line Size" },
|
|
{ BMC_BASE + 0x10, "MPC107 LMBAR" },
|
|
{ BMC_BASE + 0x14, "MPC824x PCSR" },
|
|
{ BMC_BASE + 0xA8, "MPC824x PICR1" },
|
|
{ BMC_BASE + 0xAC, "MPC824x PICR2" },
|
|
{ BMC_BASE + 0x46, "MPC824x PACR" },
|
|
{ BMC_BASE + 0x310, "MPC824x ITWR" },
|
|
{ BMC_BASE + 0x300, "MPC824x OMBAR" },
|
|
{ BMC_BASE + 0x308, "MPC824x OTWR" },
|
|
{ BMC_BASE + 0x14, "MPC107 Peripheral Control and Status Register" },
|
|
{ BMC_BASE + 0x78, "MPC107 EUMBAR" },
|
|
{ BMC_BASE + 0xC0, "MPC107 Processor Bus Error Status" },
|
|
{ BMC_BASE + 0xC4, "MPC107 PCI Bus Error Status" },
|
|
{ BMC_BASE + 0xC8, "MPC107 Processor/PCI Error Address" },
|
|
{ BMC_BASE + 0xE0, "MPC107 AMBOR Register" },
|
|
{ BMC_BASE + 0xF0, "MPC107 MCCR1 Register" },
|
|
{ BMC_BASE + 0xF4, "MPC107 MCCR2 Register" },
|
|
{ BMC_BASE + 0xF8, "MPC107 MCCR3 Register" },
|
|
{ BMC_BASE + 0xFC, "MPC107 MCCR4 Register" },
|
|
};
|
|
#define N_MPC107_Regs (sizeof(MPC107Regs)/sizeof(MPC107Regs[0]))
|
|
#endif /* INCLUDE_MPC107_REPORT */
|
|
#endif /* CONFIG_MOUSSE */
|
|
|
|
/*
|
|
* initialize higher level parts of CPU like time base and timers
|
|
*/
|
|
int cpu_init_r (void)
|
|
{
|
|
#ifdef CONFIG_MOUSSE
|
|
#ifdef INCLUDE_MPC107_REPORT
|
|
unsigned int tmp = 0, i;
|
|
#endif
|
|
/*
|
|
* Initialize the EUMBBAR (Embedded Util Mem Block Base Addr Reg).
|
|
* This is necessary before the EPIC, DMA ctlr, I2C ctlr, etc. can
|
|
* be accessed.
|
|
*/
|
|
|
|
#ifdef CONFIG_MPC8240 /* only on MPC8240 */
|
|
mpc824x_mpc107_setreg (EUMBBAR, EUMBBAR_VAL);
|
|
/* MOT/SPS: Issue #10002, PCI (FD Alias enable) */
|
|
mpc824x_mpc107_setreg (AMBOR, 0x000000C0);
|
|
#endif
|
|
|
|
|
|
#ifdef INCLUDE_MPC107_REPORT
|
|
/* Check MPC824x PCI Device and Vendor ID */
|
|
while ((tmp = mpc824x_mpc107_getreg (BMC_BASE)) != 0x31057) {
|
|
printf (" MPC107: offset=0x%x, val = 0x%x\n",
|
|
BMC_BASE,
|
|
tmp);
|
|
}
|
|
|
|
for (i = 0; i < N_MPC107_Regs; i++) {
|
|
printf (" 0x%x/%s = 0x%x\n",
|
|
MPC107Regs[i].iobase,
|
|
MPC107Regs[i].desc,
|
|
mpc824x_mpc107_getreg (MPC107Regs[i].iobase));
|
|
}
|
|
|
|
printf ("IBAT0L = 0x%08X\n", mfspr (IBAT0L));
|
|
printf ("IBAT0U = 0x%08X\n", mfspr (IBAT0U));
|
|
printf ("IBAT1L = 0x%08X\n", mfspr (IBAT1L));
|
|
printf ("IBAT1U = 0x%08X\n", mfspr (IBAT1U));
|
|
printf ("IBAT2L = 0x%08X\n", mfspr (IBAT2L));
|
|
printf ("IBAT2U = 0x%08X\n", mfspr (IBAT2U));
|
|
printf ("IBAT3L = 0x%08X\n", mfspr (IBAT3L));
|
|
printf ("IBAT3U = 0x%08X\n", mfspr (IBAT3U));
|
|
printf ("DBAT0L = 0x%08X\n", mfspr (DBAT0L));
|
|
printf ("DBAT0U = 0x%08X\n", mfspr (DBAT0U));
|
|
printf ("DBAT1L = 0x%08X\n", mfspr (DBAT1L));
|
|
printf ("DBAT1U = 0x%08X\n", mfspr (DBAT1U));
|
|
printf ("DBAT2L = 0x%08X\n", mfspr (DBAT2L));
|
|
printf ("DBAT2U = 0x%08X\n", mfspr (DBAT2U));
|
|
printf ("DBAT3L = 0x%08X\n", mfspr (DBAT3L));
|
|
printf ("DBAT3U = 0x%08X\n", mfspr (DBAT3U));
|
|
#endif /* INCLUDE_MPC107_REPORT */
|
|
#endif /* CONFIG_MOUSSE */
|
|
return (0);
|
|
}
|