mirror of
				https://github.com/smaeul/u-boot.git
				synced 2025-11-03 21:48:15 +00:00 
			
		
		
		
	This is a debug command to monitor the retention state of the data on
the array. The command needs a duplication of the mtd_read_oob()
function to actually return the maximum number of bitflips encountered
while reading the page. We could write a specific implementation for the
Sunxi driver but this is probably enough.
    nand watch <off> <size> - check an area for bitflips
    nand watch.part <part> - check a partition for bitflips
    nand watch.chip - check the whole device for bitflips
The output may be a bit verbose and could look like:
    => nand watch.chip
    device 0 whole chip
    size adjusted to 0xff60000 (5 bad blocks)
    NAND watch for bitflips in area 0x0-0xff60000:
    Page       0 (0x00000000) -> error -74
    Page       1 (0x00000800) -> error -74
    Page       2 (0x00001000) -> error -74
    Page       3 (0x00001800) -> error -74
    Page       4 (0x00002000) -> error -74
    Page       5 (0x00002800) -> error -74
    Page       6 (0x00003000) -> error -74
    Page       7 (0x00003800) -> error -74
    Page       8 (0x00004000) -> error -74
    Page       9 (0x00004800) -> error -74
    Page      10 (0x00005000) -> error -74
    Page      11 (0x00005800) -> error -74
    Page      12 (0x00006000) -> error -74
    Page      13 (0x00006800) -> error -74
    Page      14 (0x00007000) -> error -74
    Page      15 (0x00007800) -> error -74
    Page      16 (0x00008000) -> error -74
    Page      17 (0x00008800) -> error -74
    Page      18 (0x00009000) -> error -74
    Page      19 (0x00009800) -> error -74
    Page      20 (0x0000a000) -> error -74
    Page      21 (0x0000a800) -> error -74
    Page      22 (0x0000b000) -> error -74
    Page      23 (0x0000b800) -> error -74
    Page    1110 (0x0022b000) -> up to  1 bf/chunk
    Page    1122 (0x00231000) -> up to  1 bf/chunk
    Page    1132 (0x00236000) -> up to  1 bf/chunk
    Page    1362 (0x002a9000) -> up to  1 bf/chunk
    Page    4990 (0x009bf000) -> up to  1 bf/chunk
    Page    5728 (0x00b30000) -> up to  1 bf/chunk
    Page    7116 (0x00de6000) -> up to  1 bf/chunk
    Page    7160 (0x00dfc000) -> up to  1 bf/chunk
    Page    7494 (0x00ea3000) -> up to  1 bf/chunk
    Page   10842 (0x0152d000) -> up to  1 bf/chunk
    Page   11614 (0x016af000) -> up to  1 bf/chunk
    Page   11970 (0x01761000) -> up to  1 bf/chunk
    Page   12536 (0x0187c000) -> up to  1 bf/chunk
    Page   12687 (0x018c7800) -> up to  1 bf/chunk
    Page   14298 (0x01bed000) -> up to  1 bf/chunk
    Page   18268 (0x023ae000) -> up to  1 bf/chunk
    Page   18760 (0x024a4000) -> up to  1 bf/chunk
    Page   21440 (0x029e0000) -> up to  1 bf/chunk
    Page   22336 (0x02ba0000) -> up to  1 bf/chunk
    Page   22592 (0x02c20000) -> up to  1 bf/chunk
    Page   23872 (0x02ea0000) -> up to  1 bf/chunk
    Page   27584 (0x035e0000) -> up to  1 bf/chunk
    Page   35008 (0x04460000) -> up to  1 bf/chunk
    Page   37184 (0x048a0000) -> up to  1 bf/chunk
    Page   41728 (0x05180000) -> up to  1 bf/chunk
    Page   42176 (0x05260000) -> up to  1 bf/chunk
    Page   43200 (0x05460000) -> up to  1 bf/chunk
    Page   43328 (0x054a0000) -> up to  1 bf/chunk
    Page   45376 (0x058a0000) -> up to  1 bf/chunk
    Page   47040 (0x05be0000) -> up to  1 bf/chunk
    Page   47552 (0x05ce0000) -> up to  1 bf/chunk
    Page   49344 (0x06060000) -> up to  1 bf/chunk
    Page   49856 (0x06160000) -> up to  1 bf/chunk
    Page   62784 (0x07aa0000) -> up to  1 bf/chunk
    Page   65153 (0x07f40800) -> up to  1 bf/chunk
    Page   65228 (0x07f66000) -> up to  1 bf/chunk
    Page   65382 (0x07fb3000) -> up to  1 bf/chunk
    Page   98624 (0x0c0a0000) -> up to  1 bf/chunk
    Page  101952 (0x0c720000) -> up to  1 bf/chunk
    Page  107584 (0x0d220000) -> up to  1 bf/chunk
    Page  118208 (0x0e6e0000) -> up to  1 bf/chunk
    Page  126656 (0x0f760000) -> up to  1 bf/chunk
    Page  127680 (0x0f960000) -> up to  1 bf/chunk
    Page  129920 (0x0fdc0000) -> up to  1 bf/chunk
    Maximum number of bitflips: 1
    Pages with bitflips: 44/130752
It is also possible to reduce the output with the .quiet suffix in order
to just show the summary.
    => nand watch.chip
    device 0 whole chip
    size adjusted to 0xff60000 (5 bad blocks)
    NAND watch for bitflips in area 0x0-0xff60000:
    Maximum number of bitflips: 1
    Pages with bitflips: 44/130752
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
		
	
			
		
			
				
	
	
		
			1254 lines
		
	
	
		
			30 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1254 lines
		
	
	
		
			30 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Driver for NAND support, Rick Bronson
 | 
						|
 * borrowed heavily from:
 | 
						|
 * (c) 1999 Machine Vision Holdings, Inc.
 | 
						|
 * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
 | 
						|
 *
 | 
						|
 * Ported 'dynenv' to 'nand env.oob' command
 | 
						|
 * (C) 2010 Nanometrics, Inc.
 | 
						|
 * 'dynenv' -- Dynamic environment offset in NAND OOB
 | 
						|
 * (C) Copyright 2006-2007 OpenMoko, Inc.
 | 
						|
 * Added 16-bit nand support
 | 
						|
 * (C) 2004 Texas Instruments
 | 
						|
 *
 | 
						|
 * Copyright 2010, 2012 Freescale Semiconductor
 | 
						|
 * The portions of this file whose copyright is held by Freescale and which
 | 
						|
 * are not considered a derived work of GPL v2-only code may be distributed
 | 
						|
 * and/or modified under the terms of the GNU General Public License as
 | 
						|
 * published by the Free Software Foundation; either version 2 of the
 | 
						|
 * License, or (at your option) any later version.
 | 
						|
 *
 | 
						|
 * The function nand_biterror() in this file is inspired from
 | 
						|
 * mtd-utils/nand-utils/nandflipbits.c which was released under GPLv2
 | 
						|
 * only
 | 
						|
 */
 | 
						|
 | 
						|
#include <bootstage.h>
 | 
						|
#include <image.h>
 | 
						|
#include <asm/cache.h>
 | 
						|
#include <linux/mtd/mtd.h>
 | 
						|
#include <linux/mtd/rawnand.h>
 | 
						|
#include <command.h>
 | 
						|
#include <console.h>
 | 
						|
#include <env.h>
 | 
						|
#include <watchdog.h>
 | 
						|
#include <malloc.h>
 | 
						|
#include <mapmem.h>
 | 
						|
#include <asm/byteorder.h>
 | 
						|
#include <jffs2/jffs2.h>
 | 
						|
#include <nand.h>
 | 
						|
 | 
						|
#include "legacy-mtd-utils.h"
 | 
						|
 | 
						|
#if defined(CONFIG_CMD_MTDPARTS)
 | 
						|
 | 
						|
/* partition handling routines */
 | 
						|
int mtdparts_init(void);
 | 
						|
int find_dev_and_part(const char *id, struct mtd_device **dev,
 | 
						|
		      u8 *part_num, struct part_info **part);
 | 
						|
#endif
 | 
						|
 | 
						|
#define MAX_NUM_PAGES 64
 | 
						|
 | 
						|
static int nand_biterror(struct mtd_info *mtd, ulong off, int bit)
 | 
						|
{
 | 
						|
	int ret = 0;
 | 
						|
	int page = 0;
 | 
						|
	ulong  block_off;
 | 
						|
	u_char *datbuf[MAX_NUM_PAGES]; /* Data and OOB */
 | 
						|
	u_char data;
 | 
						|
	int pages_per_blk = mtd->erasesize / mtd->writesize;
 | 
						|
	struct erase_info einfo;
 | 
						|
 | 
						|
	if (pages_per_blk > MAX_NUM_PAGES) {
 | 
						|
		printf("Too many pages in one erase block\n");
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
 | 
						|
	if (bit < 0 || bit > 7) {
 | 
						|
		printf("bit position 0 to 7 is allowed\n");
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Allocate memory */
 | 
						|
	memset(datbuf, 0, sizeof(datbuf));
 | 
						|
	for (page = 0; page < pages_per_blk ; page++) {
 | 
						|
		datbuf[page] = malloc(mtd->writesize + mtd->oobsize);
 | 
						|
		if (!datbuf[page]) {
 | 
						|
			printf("No memory for page buffer\n");
 | 
						|
			ret = -ENOMEM;
 | 
						|
			goto free_memory;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Align to erase block boundary */
 | 
						|
	block_off = off & (~(mtd->erasesize - 1));
 | 
						|
 | 
						|
	/* Read out memory as first step */
 | 
						|
	for (page = 0; page < pages_per_blk ; page++) {
 | 
						|
		struct mtd_oob_ops ops;
 | 
						|
		loff_t addr = (loff_t)block_off;
 | 
						|
 | 
						|
		memset(&ops, 0, sizeof(ops));
 | 
						|
		ops.datbuf = datbuf[page];
 | 
						|
		ops.oobbuf = datbuf[page] + mtd->writesize;
 | 
						|
		ops.len = mtd->writesize;
 | 
						|
		ops.ooblen = mtd->oobsize;
 | 
						|
		ops.mode = MTD_OPS_RAW;
 | 
						|
		ret = mtd_read_oob(mtd, addr, &ops);
 | 
						|
		if (ret < 0) {
 | 
						|
			printf("Error (%d) reading page %08lx\n",
 | 
						|
			       ret, block_off);
 | 
						|
			ret = 1;
 | 
						|
			goto free_memory;
 | 
						|
		}
 | 
						|
		block_off += mtd->writesize;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Erase the block */
 | 
						|
	memset(&einfo, 0, sizeof(einfo));
 | 
						|
	einfo.mtd = mtd;
 | 
						|
	/* Align to erase block boundary */
 | 
						|
	einfo.addr = (loff_t)(off & (~(mtd->erasesize - 1)));
 | 
						|
	einfo.len = mtd->erasesize;
 | 
						|
	ret = mtd_erase(mtd, &einfo);
 | 
						|
	if (ret < 0) {
 | 
						|
		printf("Error (%d) nand_erase_nand page %08llx\n",
 | 
						|
		       ret, einfo.addr);
 | 
						|
		ret = 1;
 | 
						|
		goto free_memory;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Twist a bit in data part */
 | 
						|
	block_off = off & (mtd->erasesize - 1);
 | 
						|
	data = datbuf[block_off / mtd->writesize][block_off % mtd->writesize];
 | 
						|
	data ^= (1 << bit);
 | 
						|
	datbuf[block_off / mtd->writesize][block_off % mtd->writesize] = data;
 | 
						|
 | 
						|
	printf("Flip data at 0x%lx with xor 0x%02x (bit=%d) to value=0x%02x\n",
 | 
						|
	       off, (1 << bit), bit, data);
 | 
						|
 | 
						|
	/* Write back twisted data and unmodified OOB */
 | 
						|
	/* Align to erase block boundary */
 | 
						|
	block_off = off & (~(mtd->erasesize - 1));
 | 
						|
	for (page = 0; page < pages_per_blk; page++) {
 | 
						|
		struct mtd_oob_ops ops;
 | 
						|
		loff_t addr = (loff_t)block_off;
 | 
						|
 | 
						|
		memset(&ops, 0, sizeof(ops));
 | 
						|
		ops.datbuf = datbuf[page];
 | 
						|
		ops.oobbuf = datbuf[page] + mtd->writesize;
 | 
						|
		ops.len = mtd->writesize;
 | 
						|
		ops.ooblen = mtd->oobsize;
 | 
						|
		ops.mode = MTD_OPS_RAW;
 | 
						|
		ret = mtd_write_oob(mtd, addr, &ops);
 | 
						|
		if (ret < 0) {
 | 
						|
			printf("Error (%d) write page %08lx\n", ret, block_off);
 | 
						|
			ret = 1;
 | 
						|
			goto free_memory;
 | 
						|
		}
 | 
						|
		block_off += mtd->writesize;
 | 
						|
	}
 | 
						|
 | 
						|
free_memory:
 | 
						|
	for (page = 0; page < pages_per_blk ; page++) {
 | 
						|
		if (datbuf[page])
 | 
						|
			free(datbuf[page]);
 | 
						|
	}
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int nand_dump(struct mtd_info *mtd, ulong off, int only_oob,
 | 
						|
		     int repeat)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	u_char *datbuf, *oobbuf, *p;
 | 
						|
	static loff_t last;
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	if (repeat)
 | 
						|
		off = last + mtd->writesize;
 | 
						|
 | 
						|
	last = off;
 | 
						|
 | 
						|
	datbuf = memalign(ARCH_DMA_MINALIGN, mtd->writesize);
 | 
						|
	if (!datbuf) {
 | 
						|
		puts("No memory for page buffer\n");
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
 | 
						|
	oobbuf = memalign(ARCH_DMA_MINALIGN, mtd->oobsize);
 | 
						|
	if (!oobbuf) {
 | 
						|
		puts("No memory for page buffer\n");
 | 
						|
		ret = 1;
 | 
						|
		goto free_dat;
 | 
						|
	}
 | 
						|
	off &= ~(mtd->writesize - 1);
 | 
						|
	loff_t addr = (loff_t) off;
 | 
						|
	struct mtd_oob_ops ops;
 | 
						|
	memset(&ops, 0, sizeof(ops));
 | 
						|
	ops.datbuf = datbuf;
 | 
						|
	ops.oobbuf = oobbuf;
 | 
						|
	ops.len = mtd->writesize;
 | 
						|
	ops.ooblen = mtd->oobsize;
 | 
						|
	ops.mode = MTD_OPS_RAW;
 | 
						|
	i = mtd_read_oob(mtd, addr, &ops);
 | 
						|
	if (i < 0) {
 | 
						|
		printf("Error (%d) reading page %08lx\n", i, off);
 | 
						|
		ret = 1;
 | 
						|
		goto free_all;
 | 
						|
	}
 | 
						|
	printf("Page %08lx dump:\n", off);
 | 
						|
 | 
						|
	if (!only_oob) {
 | 
						|
		i = mtd->writesize >> 4;
 | 
						|
		p = datbuf;
 | 
						|
 | 
						|
		while (i--) {
 | 
						|
			printf("\t%02x %02x %02x %02x %02x %02x %02x %02x"
 | 
						|
			       "  %02x %02x %02x %02x %02x %02x %02x %02x\n",
 | 
						|
			       p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],
 | 
						|
			       p[8], p[9], p[10], p[11], p[12], p[13], p[14],
 | 
						|
			       p[15]);
 | 
						|
			p += 16;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	puts("OOB:\n");
 | 
						|
	i = mtd->oobsize >> 3;
 | 
						|
	p = oobbuf;
 | 
						|
	while (i--) {
 | 
						|
		printf("\t%02x %02x %02x %02x %02x %02x %02x %02x\n",
 | 
						|
		       p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
 | 
						|
		p += 8;
 | 
						|
	}
 | 
						|
 | 
						|
free_all:
 | 
						|
	free(oobbuf);
 | 
						|
free_dat:
 | 
						|
	free(datbuf);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_CMD_NAND_WATCH
 | 
						|
static int nand_watch_bf(struct mtd_info *mtd, ulong off, ulong size, bool quiet)
 | 
						|
{
 | 
						|
	unsigned int max_bf = 0, pages_wbf = 0;
 | 
						|
	unsigned int first_page, pages, i;
 | 
						|
	struct mtd_oob_ops ops = {};
 | 
						|
	u_char *buf;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	buf = memalign(ARCH_DMA_MINALIGN, mtd->writesize);
 | 
						|
	if (!buf) {
 | 
						|
		puts("No memory for page buffer\n");
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
 | 
						|
	first_page = off / mtd->writesize;
 | 
						|
	pages = size / mtd->writesize;
 | 
						|
 | 
						|
	ops.datbuf = buf;
 | 
						|
	ops.len = mtd->writesize;
 | 
						|
	for (i = first_page; i < first_page + pages; i++) {
 | 
						|
		ulong addr = mtd->writesize * i;
 | 
						|
		ret = mtd_read_oob_bf(mtd, addr, &ops);
 | 
						|
		if (ret < 0) {
 | 
						|
			if (quiet)
 | 
						|
				continue;
 | 
						|
 | 
						|
			printf("Page %7d (0x%08lx) -> error %d\n",
 | 
						|
			       i, addr, ret);
 | 
						|
		} else if (ret) {
 | 
						|
			max_bf = max(max_bf, (unsigned int)ret);
 | 
						|
			pages_wbf++;
 | 
						|
			if (quiet)
 | 
						|
				continue;
 | 
						|
			printf("Page %7d (0x%08lx) -> up to %2d bf/chunk\n",
 | 
						|
			       i, addr, ret);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	printf("Maximum number of bitflips: %u\n", max_bf);
 | 
						|
	printf("Pages with bitflips: %u/%u\n", pages_wbf, pages);
 | 
						|
 | 
						|
	free(buf);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
/* ------------------------------------------------------------------------- */
 | 
						|
 | 
						|
static int set_dev(int dev)
 | 
						|
{
 | 
						|
	struct mtd_info *mtd = get_nand_dev_by_index(dev);
 | 
						|
 | 
						|
	if (!mtd)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	if (nand_curr_device == dev)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	printf("Device %d: %s", dev, mtd->name);
 | 
						|
	puts("... is now current device\n");
 | 
						|
	nand_curr_device = dev;
 | 
						|
 | 
						|
#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
 | 
						|
	board_nand_select_device(mtd_to_nand(mtd), dev);
 | 
						|
#endif
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
 | 
						|
static void print_status(ulong start, ulong end, ulong erasesize, int status)
 | 
						|
{
 | 
						|
	/*
 | 
						|
	 * Micron NAND flash (e.g. MT29F4G08ABADAH4) BLOCK LOCK READ STATUS is
 | 
						|
	 * not the same as others.  Instead of bit 1 being lock, it is
 | 
						|
	 * #lock_tight. To make the driver support either format, ignore bit 1
 | 
						|
	 * and use only bit 0 and bit 2.
 | 
						|
	 */
 | 
						|
	printf("%08lx - %08lx: %08lx blocks %s%s%s\n",
 | 
						|
		start,
 | 
						|
		end - 1,
 | 
						|
		(end - start) / erasesize,
 | 
						|
		((status & NAND_LOCK_STATUS_TIGHT) ?  "TIGHT " : ""),
 | 
						|
		(!(status & NAND_LOCK_STATUS_UNLOCK) ?  "LOCK " : ""),
 | 
						|
		((status & NAND_LOCK_STATUS_UNLOCK) ?  "UNLOCK " : ""));
 | 
						|
}
 | 
						|
 | 
						|
static void do_nand_status(struct mtd_info *mtd)
 | 
						|
{
 | 
						|
	ulong block_start = 0;
 | 
						|
	ulong off;
 | 
						|
	int last_status = -1;
 | 
						|
 | 
						|
	struct nand_chip *nand_chip = mtd_to_nand(mtd);
 | 
						|
	/* check the WP bit */
 | 
						|
	nand_chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
 | 
						|
	printf("device is %swrite protected\n",
 | 
						|
		(nand_chip->read_byte(mtd) & 0x80 ?
 | 
						|
		 "NOT " : ""));
 | 
						|
 | 
						|
	for (off = 0; off < mtd->size; off += mtd->erasesize) {
 | 
						|
		int s = nand_get_lock_status(mtd, off);
 | 
						|
 | 
						|
		/* print message only if status has changed */
 | 
						|
		if (s != last_status && off != 0) {
 | 
						|
			print_status(block_start, off, mtd->erasesize,
 | 
						|
					last_status);
 | 
						|
			block_start = off;
 | 
						|
		}
 | 
						|
		last_status = s;
 | 
						|
	}
 | 
						|
	/* Print the last block info */
 | 
						|
	print_status(block_start, off, mtd->erasesize, last_status);
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
#ifdef CONFIG_ENV_OFFSET_OOB
 | 
						|
unsigned long nand_env_oob_offset;
 | 
						|
 | 
						|
int do_nand_env_oob(struct cmd_tbl *cmdtp, int argc, char *const argv[])
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	uint32_t oob_buf[ENV_OFFSET_SIZE/sizeof(uint32_t)];
 | 
						|
	struct mtd_info *mtd = get_nand_dev_by_index(0);
 | 
						|
	char *cmd = argv[1];
 | 
						|
 | 
						|
	if (CONFIG_SYS_MAX_NAND_DEVICE == 0 || !mtd) {
 | 
						|
		puts("no devices available\n");
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
 | 
						|
	set_dev(0);
 | 
						|
 | 
						|
	if (!strcmp(cmd, "get")) {
 | 
						|
		ret = get_nand_env_oob(mtd, &nand_env_oob_offset);
 | 
						|
		if (ret)
 | 
						|
			return 1;
 | 
						|
 | 
						|
		printf("0x%08lx\n", nand_env_oob_offset);
 | 
						|
	} else if (!strcmp(cmd, "set")) {
 | 
						|
		loff_t addr;
 | 
						|
		loff_t maxsize;
 | 
						|
		struct mtd_oob_ops ops;
 | 
						|
		int idx = 0;
 | 
						|
 | 
						|
		if (argc < 3)
 | 
						|
			goto usage;
 | 
						|
 | 
						|
		mtd = get_nand_dev_by_index(idx);
 | 
						|
		/* We don't care about size, or maxsize. */
 | 
						|
		if (mtd_arg_off(argv[2], &idx, &addr, &maxsize, &maxsize,
 | 
						|
				MTD_DEV_TYPE_NAND, mtd->size)) {
 | 
						|
			puts("Offset or partition name expected\n");
 | 
						|
			return 1;
 | 
						|
		}
 | 
						|
		if (set_dev(idx)) {
 | 
						|
			puts("Offset or partition name expected\n");
 | 
						|
			return 1;
 | 
						|
		}
 | 
						|
 | 
						|
		if (idx != 0) {
 | 
						|
			puts("Partition not on first NAND device\n");
 | 
						|
			return 1;
 | 
						|
		}
 | 
						|
 | 
						|
		if (mtd->oobavail < ENV_OFFSET_SIZE) {
 | 
						|
			printf("Insufficient available OOB bytes:\n"
 | 
						|
			       "%d OOB bytes available but %d required for "
 | 
						|
			       "env.oob support\n",
 | 
						|
			       mtd->oobavail, ENV_OFFSET_SIZE);
 | 
						|
			return 1;
 | 
						|
		}
 | 
						|
 | 
						|
		if ((addr & (mtd->erasesize - 1)) != 0) {
 | 
						|
			printf("Environment offset must be block-aligned\n");
 | 
						|
			return 1;
 | 
						|
		}
 | 
						|
 | 
						|
		ops.datbuf = NULL;
 | 
						|
		ops.mode = MTD_OOB_AUTO;
 | 
						|
		ops.ooboffs = 0;
 | 
						|
		ops.ooblen = ENV_OFFSET_SIZE;
 | 
						|
		ops.oobbuf = (void *) oob_buf;
 | 
						|
 | 
						|
		oob_buf[0] = ENV_OOB_MARKER;
 | 
						|
		oob_buf[1] = addr / mtd->erasesize;
 | 
						|
 | 
						|
		ret = mtd->write_oob(mtd, ENV_OFFSET_SIZE, &ops);
 | 
						|
		if (ret) {
 | 
						|
			printf("Error writing OOB block 0\n");
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
 | 
						|
		ret = get_nand_env_oob(mtd, &nand_env_oob_offset);
 | 
						|
		if (ret) {
 | 
						|
			printf("Error reading env offset in OOB\n");
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
 | 
						|
		if (addr != nand_env_oob_offset) {
 | 
						|
			printf("Verification of env offset in OOB failed: "
 | 
						|
			       "0x%08llx expected but got 0x%08lx\n",
 | 
						|
			       (unsigned long long)addr, nand_env_oob_offset);
 | 
						|
			return 1;
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		goto usage;
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
 | 
						|
usage:
 | 
						|
	return CMD_RET_USAGE;
 | 
						|
}
 | 
						|
 | 
						|
#endif
 | 
						|
 | 
						|
static void nand_print_and_set_info(int idx)
 | 
						|
{
 | 
						|
	struct mtd_info *mtd;
 | 
						|
	struct nand_chip *chip;
 | 
						|
 | 
						|
	mtd = get_nand_dev_by_index(idx);
 | 
						|
	if (!mtd)
 | 
						|
		return;
 | 
						|
 | 
						|
	chip = mtd_to_nand(mtd);
 | 
						|
	printf("Device %d: ", idx);
 | 
						|
	if (chip->numchips > 1)
 | 
						|
		printf("%dx ", chip->numchips);
 | 
						|
	printf("%s, sector size %u KiB\n",
 | 
						|
	       mtd->name, mtd->erasesize >> 10);
 | 
						|
	printf("  Page size     %8d b\n", mtd->writesize);
 | 
						|
	printf("  OOB size      %8d b\n", mtd->oobsize);
 | 
						|
	printf("  Erase size    %8d b\n", mtd->erasesize);
 | 
						|
	printf("  ecc strength  %8d bits\n", mtd->ecc_strength);
 | 
						|
	printf("  ecc step size %8d b\n", mtd->ecc_step_size);
 | 
						|
	printf("  subpagesize   %8d b\n", chip->subpagesize);
 | 
						|
	printf("  options       0x%08x\n", chip->options);
 | 
						|
	printf("  bbt options   0x%08x\n", chip->bbt_options);
 | 
						|
 | 
						|
	/* Set geometry info */
 | 
						|
	env_set_hex("nand_writesize", mtd->writesize);
 | 
						|
	env_set_hex("nand_oobsize", mtd->oobsize);
 | 
						|
	env_set_hex("nand_erasesize", mtd->erasesize);
 | 
						|
}
 | 
						|
 | 
						|
static int raw_access(struct mtd_info *mtd, void *buf, loff_t off,
 | 
						|
		      ulong count, int read, int no_verify)
 | 
						|
{
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	while (count--) {
 | 
						|
		/* Raw access */
 | 
						|
		mtd_oob_ops_t ops = {
 | 
						|
			.datbuf = buf,
 | 
						|
			.oobbuf = buf + mtd->writesize,
 | 
						|
			.len = mtd->writesize,
 | 
						|
			.ooblen = mtd->oobsize,
 | 
						|
			.mode = MTD_OPS_RAW
 | 
						|
		};
 | 
						|
 | 
						|
		if (read) {
 | 
						|
			ret = mtd_read_oob(mtd, off, &ops);
 | 
						|
		} else {
 | 
						|
			ret = mtd_write_oob(mtd, off, &ops);
 | 
						|
			if (!ret && !no_verify)
 | 
						|
				ret = nand_verify_page_oob(mtd, &ops, off);
 | 
						|
		}
 | 
						|
 | 
						|
		if (ret) {
 | 
						|
			printf("%s: error at offset %llx, ret %d\n",
 | 
						|
				__func__, (long long)off, ret);
 | 
						|
			break;
 | 
						|
		}
 | 
						|
 | 
						|
		buf += mtd->writesize + mtd->oobsize;
 | 
						|
		off += mtd->writesize;
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/* Adjust a chip/partition size down for bad blocks so we don't
 | 
						|
 * read/write past the end of a chip/partition by accident.
 | 
						|
 */
 | 
						|
static void adjust_size_for_badblocks(loff_t *size, loff_t offset, int dev)
 | 
						|
{
 | 
						|
	/* We grab the nand info object here fresh because this is usually
 | 
						|
	 * called after arg_off_size() which can change the value of dev.
 | 
						|
	 */
 | 
						|
	struct mtd_info *mtd = get_nand_dev_by_index(dev);
 | 
						|
	loff_t maxoffset = offset + *size;
 | 
						|
	int badblocks = 0;
 | 
						|
 | 
						|
	/* count badblocks in NAND from offset to offset + size */
 | 
						|
	for (; offset < maxoffset; offset += mtd->erasesize) {
 | 
						|
		if (nand_block_isbad(mtd, offset))
 | 
						|
			badblocks++;
 | 
						|
	}
 | 
						|
	/* adjust size if any bad blocks found */
 | 
						|
	if (badblocks) {
 | 
						|
		*size -= badblocks * mtd->erasesize;
 | 
						|
		printf("size adjusted to 0x%llx (%d bad blocks)\n",
 | 
						|
		       (unsigned long long)*size, badblocks);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int do_nand(struct cmd_tbl *cmdtp, int flag, int argc,
 | 
						|
		   char *const argv[])
 | 
						|
{
 | 
						|
	int i, ret = 0;
 | 
						|
	ulong addr;
 | 
						|
	loff_t off, size, maxsize;
 | 
						|
	char *cmd, *s;
 | 
						|
	struct mtd_info *mtd;
 | 
						|
#ifdef CONFIG_SYS_NAND_QUIET
 | 
						|
	int quiet = CONFIG_SYS_NAND_QUIET;
 | 
						|
#else
 | 
						|
	int quiet = 0;
 | 
						|
#endif
 | 
						|
	const char *quiet_str = env_get("quiet");
 | 
						|
	int dev = nand_curr_device;
 | 
						|
	int repeat = flag & CMD_FLAG_REPEAT;
 | 
						|
 | 
						|
	/* at least two arguments please */
 | 
						|
	if (argc < 2)
 | 
						|
		goto usage;
 | 
						|
 | 
						|
	if (quiet_str)
 | 
						|
		quiet = simple_strtoul(quiet_str, NULL, 0) != 0;
 | 
						|
 | 
						|
	cmd = argv[1];
 | 
						|
 | 
						|
	/* Only "dump" is repeatable. */
 | 
						|
	if (repeat && strcmp(cmd, "dump"))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	if (strcmp(cmd, "info") == 0) {
 | 
						|
 | 
						|
		putc('\n');
 | 
						|
		for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
 | 
						|
			nand_print_and_set_info(i);
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	if (strcmp(cmd, "device") == 0) {
 | 
						|
		if (argc < 3) {
 | 
						|
			putc('\n');
 | 
						|
			if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE)
 | 
						|
				puts("no devices available\n");
 | 
						|
			else
 | 
						|
				nand_print_and_set_info(dev);
 | 
						|
			return 0;
 | 
						|
		}
 | 
						|
 | 
						|
		dev = (int)dectoul(argv[2], NULL);
 | 
						|
		set_dev(dev);
 | 
						|
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
#ifdef CONFIG_ENV_OFFSET_OOB
 | 
						|
	/* this command operates only on the first nand device */
 | 
						|
	if (strcmp(cmd, "env.oob") == 0)
 | 
						|
		return do_nand_env_oob(cmdtp, argc - 1, argv + 1);
 | 
						|
#endif
 | 
						|
 | 
						|
	/* The following commands operate on the current device, unless
 | 
						|
	 * overridden by a partition specifier.  Note that if somehow the
 | 
						|
	 * current device is invalid, it will have to be changed to a valid
 | 
						|
	 * one before these commands can run, even if a partition specifier
 | 
						|
	 * for another device is to be used.
 | 
						|
	 */
 | 
						|
	mtd = get_nand_dev_by_index(dev);
 | 
						|
	if (!mtd) {
 | 
						|
		puts("\nno devices available\n");
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
 | 
						|
	if (strcmp(cmd, "bad") == 0) {
 | 
						|
		printf("\nDevice %d bad blocks:\n", dev);
 | 
						|
		for (off = 0; off < mtd->size; off += mtd->erasesize) {
 | 
						|
			ret = nand_block_isbad(mtd, off);
 | 
						|
			if (ret)
 | 
						|
				printf("  0x%08llx%s\n", (unsigned long long)off,
 | 
						|
				       ret == 2 ? "\t (bbt reserved)" : "");
 | 
						|
		}
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Syntax is:
 | 
						|
	 *   0    1     2       3    4
 | 
						|
	 *   nand erase [clean] [off size]
 | 
						|
	 */
 | 
						|
	if (strncmp(cmd, "erase", 5) == 0 || strncmp(cmd, "scrub", 5) == 0) {
 | 
						|
		nand_erase_options_t opts;
 | 
						|
		/* "clean" at index 2 means request to write cleanmarker */
 | 
						|
		int clean = argc > 2 && !strcmp("clean", argv[2]);
 | 
						|
		int scrub_yes = argc > 2 && !strcmp("-y", argv[2]);
 | 
						|
		int o = (clean || scrub_yes) ? 3 : 2;
 | 
						|
		int scrub = !strncmp(cmd, "scrub", 5);
 | 
						|
		int spread = 0;
 | 
						|
		int args = 2;
 | 
						|
		const char *scrub_warn =
 | 
						|
			"Warning: "
 | 
						|
			"scrub option will erase all factory set bad blocks!\n"
 | 
						|
			"         "
 | 
						|
			"There is no reliable way to recover them.\n"
 | 
						|
			"         "
 | 
						|
			"Use this command only for testing purposes if you\n"
 | 
						|
			"         "
 | 
						|
			"are sure of what you are doing!\n"
 | 
						|
			"\nReally scrub this NAND flash? <y/N>\n";
 | 
						|
 | 
						|
		if (cmd[5] != 0) {
 | 
						|
			if (!strcmp(&cmd[5], ".spread")) {
 | 
						|
				spread = 1;
 | 
						|
			} else if (!strcmp(&cmd[5], ".part")) {
 | 
						|
				args = 1;
 | 
						|
			} else if (!strcmp(&cmd[5], ".chip")) {
 | 
						|
				args = 0;
 | 
						|
			} else {
 | 
						|
				goto usage;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		/*
 | 
						|
		 * Don't allow missing arguments to cause full chip/partition
 | 
						|
		 * erases -- easy to do accidentally, e.g. with a misspelled
 | 
						|
		 * variable name.
 | 
						|
		 */
 | 
						|
		if (argc != o + args)
 | 
						|
			goto usage;
 | 
						|
 | 
						|
		printf("\nNAND %s: ", cmd);
 | 
						|
		/* skip first two or three arguments, look for offset and size */
 | 
						|
		if (mtd_arg_off_size(argc - o, argv + o, &dev, &off, &size,
 | 
						|
				     &maxsize, MTD_DEV_TYPE_NAND,
 | 
						|
				     mtd->size) != 0)
 | 
						|
			return 1;
 | 
						|
 | 
						|
		if (set_dev(dev))
 | 
						|
			return 1;
 | 
						|
 | 
						|
		mtd = get_nand_dev_by_index(dev);
 | 
						|
 | 
						|
		memset(&opts, 0, sizeof(opts));
 | 
						|
		opts.offset = off;
 | 
						|
		opts.length = size;
 | 
						|
		opts.jffs2  = clean;
 | 
						|
		opts.quiet  = quiet;
 | 
						|
		opts.spread = spread;
 | 
						|
 | 
						|
		if (scrub) {
 | 
						|
			if (scrub_yes) {
 | 
						|
				opts.scrub = 1;
 | 
						|
			} else {
 | 
						|
				puts(scrub_warn);
 | 
						|
				if (confirm_yesno()) {
 | 
						|
					opts.scrub = 1;
 | 
						|
				} else {
 | 
						|
					puts("scrub aborted\n");
 | 
						|
					return 1;
 | 
						|
				}
 | 
						|
			}
 | 
						|
		}
 | 
						|
		ret = nand_erase_opts(mtd, &opts);
 | 
						|
		printf("%s\n", ret ? "ERROR" : "OK");
 | 
						|
 | 
						|
		return ret == 0 ? 0 : 1;
 | 
						|
	}
 | 
						|
 | 
						|
	if (strncmp(cmd, "dump", 4) == 0) {
 | 
						|
		if (argc < 3)
 | 
						|
			goto usage;
 | 
						|
 | 
						|
		off = (int)hextoul(argv[2], NULL);
 | 
						|
		ret = nand_dump(mtd, off, !strcmp(&cmd[4], ".oob"), repeat);
 | 
						|
 | 
						|
		return ret == 0 ? 1 : 0;
 | 
						|
	}
 | 
						|
 | 
						|
	if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
 | 
						|
		size_t rwsize;
 | 
						|
		ulong pagecount = 1;
 | 
						|
		int read;
 | 
						|
		int raw = 0;
 | 
						|
		int no_verify = 0;
 | 
						|
		void *buf;
 | 
						|
 | 
						|
		if (argc < 4)
 | 
						|
			goto usage;
 | 
						|
 | 
						|
		addr = (ulong)hextoul(argv[2], NULL);
 | 
						|
 | 
						|
		read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
 | 
						|
		printf("\nNAND %s: ", read ? "read" : "write");
 | 
						|
 | 
						|
		s = strchr(cmd, '.');
 | 
						|
 | 
						|
		if (s && !strncmp(s, ".raw", 4)) {
 | 
						|
			raw = 1;
 | 
						|
 | 
						|
			if (!strcmp(s, ".raw.noverify"))
 | 
						|
				no_verify = 1;
 | 
						|
 | 
						|
			if (mtd_arg_off(argv[3], &dev, &off, &size, &maxsize,
 | 
						|
					MTD_DEV_TYPE_NAND,
 | 
						|
					mtd->size))
 | 
						|
				return 1;
 | 
						|
 | 
						|
			if (set_dev(dev))
 | 
						|
				return 1;
 | 
						|
 | 
						|
			mtd = get_nand_dev_by_index(dev);
 | 
						|
 | 
						|
			if (argc > 4 && !str2long(argv[4], &pagecount)) {
 | 
						|
				printf("'%s' is not a number\n", argv[4]);
 | 
						|
				return 1;
 | 
						|
			}
 | 
						|
 | 
						|
			if (pagecount * mtd->writesize > size) {
 | 
						|
				puts("Size exceeds partition or device limit\n");
 | 
						|
				return -1;
 | 
						|
			}
 | 
						|
 | 
						|
			rwsize = pagecount * (mtd->writesize + mtd->oobsize);
 | 
						|
		} else {
 | 
						|
			if (mtd_arg_off_size(argc - 3, argv + 3, &dev, &off,
 | 
						|
					     &size, &maxsize,
 | 
						|
					     MTD_DEV_TYPE_NAND,
 | 
						|
					     mtd->size) != 0)
 | 
						|
				return 1;
 | 
						|
 | 
						|
			if (set_dev(dev))
 | 
						|
				return 1;
 | 
						|
 | 
						|
			/* size is unspecified */
 | 
						|
			if (argc < 5)
 | 
						|
				adjust_size_for_badblocks(&size, off, dev);
 | 
						|
			rwsize = size;
 | 
						|
		}
 | 
						|
 | 
						|
		mtd = get_nand_dev_by_index(dev);
 | 
						|
		buf = map_sysmem(addr, maxsize);
 | 
						|
 | 
						|
		if (!s || !strcmp(s, ".jffs2") ||
 | 
						|
		    !strcmp(s, ".e") || !strcmp(s, ".i")) {
 | 
						|
			if (read)
 | 
						|
				ret = nand_read_skip_bad(mtd, off, &rwsize,
 | 
						|
							 NULL, maxsize, buf);
 | 
						|
			else
 | 
						|
				ret = nand_write_skip_bad(mtd, off, &rwsize,
 | 
						|
							  NULL, maxsize, buf,
 | 
						|
							  WITH_WR_VERIFY);
 | 
						|
#ifdef CONFIG_CMD_NAND_TRIMFFS
 | 
						|
		} else if (!strcmp(s, ".trimffs")) {
 | 
						|
			if (read) {
 | 
						|
				printf("Unknown nand command suffix '%s'\n", s);
 | 
						|
				unmap_sysmem(buf);
 | 
						|
				return 1;
 | 
						|
			}
 | 
						|
			ret = nand_write_skip_bad(mtd, off, &rwsize, NULL,
 | 
						|
						maxsize, buf,
 | 
						|
						WITH_DROP_FFS | WITH_WR_VERIFY);
 | 
						|
#endif
 | 
						|
		} else if (!strcmp(s, ".oob")) {
 | 
						|
			/* out-of-band data */
 | 
						|
			mtd_oob_ops_t ops = {
 | 
						|
				.oobbuf = buf,
 | 
						|
				.ooblen = rwsize,
 | 
						|
				.mode = MTD_OPS_RAW
 | 
						|
			};
 | 
						|
 | 
						|
			if (read)
 | 
						|
				ret = mtd_read_oob(mtd, off, &ops);
 | 
						|
			else
 | 
						|
				ret = mtd_write_oob(mtd, off, &ops);
 | 
						|
		} else if (raw) {
 | 
						|
			ret = raw_access(mtd, buf, off, pagecount, read,
 | 
						|
					 no_verify);
 | 
						|
		} else {
 | 
						|
			printf("Unknown nand command suffix '%s'.\n", s);
 | 
						|
			unmap_sysmem(buf);
 | 
						|
			return 1;
 | 
						|
		}
 | 
						|
 | 
						|
		unmap_sysmem(buf);
 | 
						|
		printf(" %zu bytes %s: %s\n", rwsize,
 | 
						|
		       read ? "read" : "written", ret ? "ERROR" : "OK");
 | 
						|
 | 
						|
		return ret == 0 ? 0 : 1;
 | 
						|
	}
 | 
						|
 | 
						|
#ifdef CONFIG_CMD_NAND_WATCH
 | 
						|
	if (strncmp(cmd, "watch", 5) == 0) {
 | 
						|
		int args = 2;
 | 
						|
 | 
						|
		if (cmd[5]) {
 | 
						|
			if (!strncmp(&cmd[5], ".part", 5)) {
 | 
						|
				args = 1;
 | 
						|
			} else if (!strncmp(&cmd[5], ".chip", 5)) {
 | 
						|
				args = 0;
 | 
						|
			} else {
 | 
						|
				goto usage;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		if (cmd[10])
 | 
						|
			if (!strncmp(&cmd[10], ".quiet", 6))
 | 
						|
				quiet = true;
 | 
						|
 | 
						|
		if (argc != 2 + args)
 | 
						|
			goto usage;
 | 
						|
 | 
						|
		ret = mtd_arg_off_size(argc - 2, argv + 2, &dev, &off, &size,
 | 
						|
				       &maxsize, MTD_DEV_TYPE_NAND, mtd->size);
 | 
						|
		if (ret)
 | 
						|
			return ret;
 | 
						|
 | 
						|
		/* size is unspecified */
 | 
						|
		if (argc < 4)
 | 
						|
			adjust_size_for_badblocks(&size, off, dev);
 | 
						|
 | 
						|
		if ((off & (mtd->writesize - 1)) ||
 | 
						|
		    (size & (mtd->writesize - 1))) {
 | 
						|
			printf("Attempt to read non page-aligned data\n");
 | 
						|
			return -EINVAL;
 | 
						|
		}
 | 
						|
 | 
						|
		ret = set_dev(dev);
 | 
						|
		if (ret)
 | 
						|
			return ret;
 | 
						|
 | 
						|
		mtd = get_nand_dev_by_index(dev);
 | 
						|
 | 
						|
		printf("\nNAND watch for bitflips in area 0x%llx-0x%llx:\n",
 | 
						|
		       off, off + size);
 | 
						|
 | 
						|
		return nand_watch_bf(mtd, off, size, quiet);
 | 
						|
	}
 | 
						|
#endif
 | 
						|
 | 
						|
#ifdef CONFIG_CMD_NAND_TORTURE
 | 
						|
	if (strcmp(cmd, "torture") == 0) {
 | 
						|
		loff_t endoff;
 | 
						|
		unsigned int failed = 0, passed = 0;
 | 
						|
 | 
						|
		if (argc < 3)
 | 
						|
			goto usage;
 | 
						|
 | 
						|
		if (!str2off(argv[2], &off)) {
 | 
						|
			puts("Offset is not a valid number\n");
 | 
						|
			return 1;
 | 
						|
		}
 | 
						|
 | 
						|
		size = mtd->erasesize;
 | 
						|
		if (argc > 3) {
 | 
						|
			if (!str2off(argv[3], &size)) {
 | 
						|
				puts("Size is not a valid number\n");
 | 
						|
				return 1;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		endoff = off + size;
 | 
						|
		if (endoff > mtd->size) {
 | 
						|
			puts("Arguments beyond end of NAND\n");
 | 
						|
			return 1;
 | 
						|
		}
 | 
						|
 | 
						|
		off = round_down(off, mtd->erasesize);
 | 
						|
		endoff = round_up(endoff, mtd->erasesize);
 | 
						|
		size = endoff - off;
 | 
						|
		printf("\nNAND torture: device %d offset 0x%llx size 0x%llx (block size 0x%x)\n",
 | 
						|
		       dev, off, size, mtd->erasesize);
 | 
						|
		while (off < endoff) {
 | 
						|
			ret = nand_torture(mtd, off);
 | 
						|
			if (ret) {
 | 
						|
				failed++;
 | 
						|
				printf("  block at 0x%llx failed\n", off);
 | 
						|
			} else {
 | 
						|
				passed++;
 | 
						|
			}
 | 
						|
			off += mtd->erasesize;
 | 
						|
		}
 | 
						|
		printf(" Passed: %u, failed: %u\n", passed, failed);
 | 
						|
		return failed != 0;
 | 
						|
	}
 | 
						|
#endif
 | 
						|
 | 
						|
	if (strcmp(cmd, "markbad") == 0) {
 | 
						|
		argc -= 2;
 | 
						|
		argv += 2;
 | 
						|
 | 
						|
		if (argc <= 0)
 | 
						|
			goto usage;
 | 
						|
 | 
						|
		while (argc > 0) {
 | 
						|
			addr = hextoul(*argv, NULL);
 | 
						|
 | 
						|
			if (mtd_block_markbad(mtd, addr)) {
 | 
						|
				printf("block 0x%08lx NOT marked "
 | 
						|
					"as bad! ERROR %d\n",
 | 
						|
					addr, ret);
 | 
						|
				ret = 1;
 | 
						|
			} else {
 | 
						|
				printf("block 0x%08lx successfully "
 | 
						|
					"marked as bad\n",
 | 
						|
					addr);
 | 
						|
			}
 | 
						|
			--argc;
 | 
						|
			++argv;
 | 
						|
		}
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	if (strcmp(cmd, "biterr") == 0) {
 | 
						|
		int bit;
 | 
						|
 | 
						|
		if (argc != 4)
 | 
						|
			goto usage;
 | 
						|
 | 
						|
		off = (int)simple_strtoul(argv[2], NULL, 16);
 | 
						|
		bit = (int)simple_strtoul(argv[3], NULL, 10);
 | 
						|
		ret = nand_biterror(mtd, off, bit);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
 | 
						|
	if (strcmp(cmd, "lock") == 0) {
 | 
						|
		int tight = 0;
 | 
						|
		int status = 0;
 | 
						|
		if (argc == 3) {
 | 
						|
			if (!strcmp("tight", argv[2]))
 | 
						|
				tight = 1;
 | 
						|
			if (!strcmp("status", argv[2]))
 | 
						|
				status = 1;
 | 
						|
		}
 | 
						|
		if (status) {
 | 
						|
			do_nand_status(mtd);
 | 
						|
		} else {
 | 
						|
			if (!nand_lock(mtd, tight)) {
 | 
						|
				puts("NAND flash successfully locked\n");
 | 
						|
			} else {
 | 
						|
				puts("Error locking NAND flash\n");
 | 
						|
				return 1;
 | 
						|
			}
 | 
						|
		}
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	if (strncmp(cmd, "unlock", 5) == 0) {
 | 
						|
		int allexcept = 0;
 | 
						|
 | 
						|
		s = strchr(cmd, '.');
 | 
						|
 | 
						|
		if (s && !strcmp(s, ".allexcept"))
 | 
						|
			allexcept = 1;
 | 
						|
 | 
						|
		if (mtd_arg_off_size(argc - 2, argv + 2, &dev, &off, &size,
 | 
						|
				     &maxsize, MTD_DEV_TYPE_NAND,
 | 
						|
				     mtd->size) < 0)
 | 
						|
			return 1;
 | 
						|
 | 
						|
		if (set_dev(dev))
 | 
						|
			return 1;
 | 
						|
 | 
						|
		mtd = get_nand_dev_by_index(dev);
 | 
						|
 | 
						|
		if (!nand_unlock(mtd, off, size, allexcept)) {
 | 
						|
			puts("NAND flash successfully unlocked\n");
 | 
						|
		} else {
 | 
						|
			puts("Error unlocking NAND flash, "
 | 
						|
			     "write and erase will probably fail\n");
 | 
						|
			return 1;
 | 
						|
		}
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
#endif
 | 
						|
 | 
						|
usage:
 | 
						|
	return CMD_RET_USAGE;
 | 
						|
}
 | 
						|
 | 
						|
U_BOOT_LONGHELP(nand,
 | 
						|
	"info - show available NAND devices\n"
 | 
						|
	"nand device [dev] - show or set current device\n"
 | 
						|
	"nand read - addr off|partition size\n"
 | 
						|
	"nand write - addr off|partition size\n"
 | 
						|
	"    read/write 'size' bytes starting at offset 'off'\n"
 | 
						|
	"    to/from memory address 'addr', skipping bad blocks.\n"
 | 
						|
	"nand read.raw - addr off|partition [count]\n"
 | 
						|
	"nand write.raw[.noverify] - addr off|partition [count]\n"
 | 
						|
	"    Use read.raw/write.raw to avoid ECC and access the flash as-is.\n"
 | 
						|
#ifdef CONFIG_CMD_NAND_TRIMFFS
 | 
						|
	"nand write.trimffs - addr off|partition size\n"
 | 
						|
	"    write 'size' bytes starting at offset 'off' from memory address\n"
 | 
						|
	"    'addr', skipping bad blocks and dropping any pages at the end\n"
 | 
						|
	"    of eraseblocks that contain only 0xFF\n"
 | 
						|
#endif
 | 
						|
	"nand erase[.spread] [clean] off size - erase 'size' bytes "
 | 
						|
	"from offset 'off'\n"
 | 
						|
	"    With '.spread', erase enough for given file size, otherwise,\n"
 | 
						|
	"    'size' includes skipped bad blocks.\n"
 | 
						|
	"nand erase.part [clean] partition - erase entire mtd partition'\n"
 | 
						|
	"nand erase.chip [clean] - erase entire chip'\n"
 | 
						|
	"nand bad - show bad blocks\n"
 | 
						|
	"nand dump[.oob] off - dump page\n"
 | 
						|
#ifdef CONFIG_CMD_NAND_WATCH
 | 
						|
	"nand watch <off> <size> - check an area for bitflips\n"
 | 
						|
	"nand watch.part <part> - check a partition for bitflips\n"
 | 
						|
	"nand watch.chip - check the whole device for bitflips\n"
 | 
						|
	"\t\t.quiet - Query only the summary, not the details\n"
 | 
						|
#endif
 | 
						|
#ifdef CONFIG_CMD_NAND_TORTURE
 | 
						|
	"nand torture off - torture one block at offset\n"
 | 
						|
	"nand torture off [size] - torture blocks from off to off+size\n"
 | 
						|
#endif
 | 
						|
	"nand scrub [-y] off size | scrub.part partition | scrub.chip\n"
 | 
						|
	"    really clean NAND erasing bad blocks (UNSAFE)\n"
 | 
						|
	"nand markbad off [...] - mark bad block(s) at offset (UNSAFE)\n"
 | 
						|
	"nand biterr off bit - make a bit error at offset and bit position (UNSAFE)"
 | 
						|
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
 | 
						|
	"\n"
 | 
						|
	"nand lock [tight] [status]\n"
 | 
						|
	"    bring nand to lock state or display locked pages\n"
 | 
						|
	"nand unlock[.allexcept] [offset] [size] - unlock section"
 | 
						|
#endif
 | 
						|
#ifdef CONFIG_ENV_OFFSET_OOB
 | 
						|
	"\n"
 | 
						|
	"nand env.oob - environment offset in OOB of block 0 of"
 | 
						|
	"    first device.\n"
 | 
						|
	"nand env.oob set off|partition - set enviromnent offset\n"
 | 
						|
	"nand env.oob get - get environment offset"
 | 
						|
#endif
 | 
						|
	);
 | 
						|
 | 
						|
U_BOOT_CMD(
 | 
						|
	nand, CONFIG_SYS_MAXARGS, 1, do_nand,
 | 
						|
	"NAND sub-system", nand_help_text
 | 
						|
);
 | 
						|
 | 
						|
static int nand_load_image(struct cmd_tbl *cmdtp, struct mtd_info *mtd,
 | 
						|
			   ulong offset, ulong addr, char *cmd)
 | 
						|
{
 | 
						|
	int r;
 | 
						|
	char *s;
 | 
						|
	size_t cnt;
 | 
						|
#if defined(CONFIG_LEGACY_IMAGE_FORMAT)
 | 
						|
	struct legacy_img_hdr *hdr;
 | 
						|
#endif
 | 
						|
#if defined(CONFIG_FIT)
 | 
						|
	const void *fit_hdr = NULL;
 | 
						|
#endif
 | 
						|
 | 
						|
	s = strchr(cmd, '.');
 | 
						|
	if (s != NULL &&
 | 
						|
	    (strcmp(s, ".jffs2") && strcmp(s, ".e") && strcmp(s, ".i"))) {
 | 
						|
		printf("Unknown nand load suffix '%s'\n", s);
 | 
						|
		bootstage_error(BOOTSTAGE_ID_NAND_SUFFIX);
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
 | 
						|
	printf("\nLoading from %s, offset 0x%lx\n", mtd->name, offset);
 | 
						|
 | 
						|
	cnt = mtd->writesize;
 | 
						|
	r = nand_read_skip_bad(mtd, offset, &cnt, NULL, mtd->size,
 | 
						|
			       (u_char *)addr);
 | 
						|
	if (r) {
 | 
						|
		puts("** Read error\n");
 | 
						|
		bootstage_error(BOOTSTAGE_ID_NAND_HDR_READ);
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
	bootstage_mark(BOOTSTAGE_ID_NAND_HDR_READ);
 | 
						|
 | 
						|
	switch (genimg_get_format ((void *)addr)) {
 | 
						|
#if defined(CONFIG_LEGACY_IMAGE_FORMAT)
 | 
						|
	case IMAGE_FORMAT_LEGACY:
 | 
						|
		hdr = (struct legacy_img_hdr *)addr;
 | 
						|
 | 
						|
		bootstage_mark(BOOTSTAGE_ID_NAND_TYPE);
 | 
						|
		image_print_contents (hdr);
 | 
						|
 | 
						|
		cnt = image_get_image_size (hdr);
 | 
						|
		break;
 | 
						|
#endif
 | 
						|
#if defined(CONFIG_FIT)
 | 
						|
	case IMAGE_FORMAT_FIT:
 | 
						|
		fit_hdr = (const void *)addr;
 | 
						|
		puts ("Fit image detected...\n");
 | 
						|
 | 
						|
		cnt = fit_get_size (fit_hdr);
 | 
						|
		break;
 | 
						|
#endif
 | 
						|
	default:
 | 
						|
		bootstage_error(BOOTSTAGE_ID_NAND_TYPE);
 | 
						|
		puts ("** Unknown image type\n");
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
	bootstage_mark(BOOTSTAGE_ID_NAND_TYPE);
 | 
						|
 | 
						|
	r = nand_read_skip_bad(mtd, offset, &cnt, NULL, mtd->size,
 | 
						|
			       (u_char *)addr);
 | 
						|
	if (r) {
 | 
						|
		puts("** Read error\n");
 | 
						|
		bootstage_error(BOOTSTAGE_ID_NAND_READ);
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
	bootstage_mark(BOOTSTAGE_ID_NAND_READ);
 | 
						|
 | 
						|
#if defined(CONFIG_FIT)
 | 
						|
	/* This cannot be done earlier, we need complete FIT image in RAM first */
 | 
						|
	if (genimg_get_format ((void *)addr) == IMAGE_FORMAT_FIT) {
 | 
						|
		if (fit_check_format(fit_hdr, IMAGE_SIZE_INVAL)) {
 | 
						|
			bootstage_error(BOOTSTAGE_ID_NAND_FIT_READ);
 | 
						|
			puts ("** Bad FIT image format\n");
 | 
						|
			return 1;
 | 
						|
		}
 | 
						|
		bootstage_mark(BOOTSTAGE_ID_NAND_FIT_READ_OK);
 | 
						|
		fit_print_contents (fit_hdr);
 | 
						|
	}
 | 
						|
#endif
 | 
						|
 | 
						|
	/* Loading ok, update default load address */
 | 
						|
 | 
						|
	image_load_addr = addr;
 | 
						|
 | 
						|
	return bootm_maybe_autostart(cmdtp, cmd);
 | 
						|
}
 | 
						|
 | 
						|
static int do_nandboot(struct cmd_tbl *cmdtp, int flag, int argc,
 | 
						|
		       char *const argv[])
 | 
						|
{
 | 
						|
	char *boot_device = NULL;
 | 
						|
	int idx;
 | 
						|
	ulong addr, offset = 0;
 | 
						|
	struct mtd_info *mtd;
 | 
						|
#if defined(CONFIG_CMD_MTDPARTS)
 | 
						|
	struct mtd_device *dev;
 | 
						|
	struct part_info *part;
 | 
						|
	u8 pnum;
 | 
						|
 | 
						|
	if (argc >= 2) {
 | 
						|
		char *p = (argc == 2) ? argv[1] : argv[2];
 | 
						|
		if (!(str2long(p, &addr)) && (mtdparts_init() == 0) &&
 | 
						|
		    (find_dev_and_part(p, &dev, &pnum, &part) == 0)) {
 | 
						|
			if (dev->id->type != MTD_DEV_TYPE_NAND) {
 | 
						|
				puts("Not a NAND device\n");
 | 
						|
				return 1;
 | 
						|
			}
 | 
						|
			if (argc > 3)
 | 
						|
				goto usage;
 | 
						|
			if (argc == 3)
 | 
						|
				addr = hextoul(argv[1], NULL);
 | 
						|
			else
 | 
						|
				addr = CONFIG_SYS_LOAD_ADDR;
 | 
						|
 | 
						|
			mtd = get_nand_dev_by_index(dev->id->num);
 | 
						|
			return nand_load_image(cmdtp, mtd, part->offset,
 | 
						|
					       addr, argv[0]);
 | 
						|
		}
 | 
						|
	}
 | 
						|
#endif
 | 
						|
 | 
						|
	bootstage_mark(BOOTSTAGE_ID_NAND_PART);
 | 
						|
	switch (argc) {
 | 
						|
	case 1:
 | 
						|
		addr = CONFIG_SYS_LOAD_ADDR;
 | 
						|
		boot_device = env_get("bootdevice");
 | 
						|
		break;
 | 
						|
	case 2:
 | 
						|
		addr = hextoul(argv[1], NULL);
 | 
						|
		boot_device = env_get("bootdevice");
 | 
						|
		break;
 | 
						|
	case 3:
 | 
						|
		addr = hextoul(argv[1], NULL);
 | 
						|
		boot_device = argv[2];
 | 
						|
		break;
 | 
						|
	case 4:
 | 
						|
		addr = hextoul(argv[1], NULL);
 | 
						|
		boot_device = argv[2];
 | 
						|
		offset = hextoul(argv[3], NULL);
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
#if defined(CONFIG_CMD_MTDPARTS)
 | 
						|
usage:
 | 
						|
#endif
 | 
						|
		bootstage_error(BOOTSTAGE_ID_NAND_SUFFIX);
 | 
						|
		return CMD_RET_USAGE;
 | 
						|
	}
 | 
						|
	bootstage_mark(BOOTSTAGE_ID_NAND_SUFFIX);
 | 
						|
 | 
						|
	if (!boot_device) {
 | 
						|
		puts("\n** No boot device **\n");
 | 
						|
		bootstage_error(BOOTSTAGE_ID_NAND_BOOT_DEVICE);
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
	bootstage_mark(BOOTSTAGE_ID_NAND_BOOT_DEVICE);
 | 
						|
 | 
						|
	idx = hextoul(boot_device, NULL);
 | 
						|
 | 
						|
	mtd = get_nand_dev_by_index(idx);
 | 
						|
	if (!mtd) {
 | 
						|
		printf("\n** Device %d not available\n", idx);
 | 
						|
		bootstage_error(BOOTSTAGE_ID_NAND_AVAILABLE);
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
	bootstage_mark(BOOTSTAGE_ID_NAND_AVAILABLE);
 | 
						|
 | 
						|
	return nand_load_image(cmdtp, mtd, offset, addr, argv[0]);
 | 
						|
}
 | 
						|
 | 
						|
U_BOOT_CMD(nboot, 4, 1, do_nandboot,
 | 
						|
	"boot from NAND device",
 | 
						|
	"[partition] | [[[loadAddr] dev] offset]"
 | 
						|
);
 |