mirror of
				https://github.com/smaeul/u-boot.git
				synced 2025-10-31 03:58:17 +00:00 
			
		
		
		
	As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
		
			
				
	
	
		
			962 lines
		
	
	
		
			25 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			962 lines
		
	
	
		
			25 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
 | |
| /*
 | |
|  * (C) Copyright 2015 Google, Inc
 | |
|  * Copyright 2014 Rockchip Inc.
 | |
|  *
 | |
|  * Adapted from the very similar rk3288 ddr init.
 | |
|  */
 | |
| 
 | |
| #include <config.h>
 | |
| #include <clk.h>
 | |
| #include <dm.h>
 | |
| #include <dt-structs.h>
 | |
| #include <errno.h>
 | |
| #include <hang.h>
 | |
| #include <init.h>
 | |
| #include <log.h>
 | |
| #include <ram.h>
 | |
| #include <regmap.h>
 | |
| #include <syscon.h>
 | |
| #include <asm/arch-rockchip/clock.h>
 | |
| #include <asm/arch-rockchip/cru_rk3188.h>
 | |
| #include <asm/arch-rockchip/ddr_rk3188.h>
 | |
| #include <asm/arch-rockchip/grf_rk3188.h>
 | |
| #include <asm/arch-rockchip/hardware.h>
 | |
| #include <asm/arch-rockchip/pmu_rk3188.h>
 | |
| #include <asm/arch-rockchip/sdram.h>
 | |
| #include <asm/arch-rockchip/sdram_rk3288.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/err.h>
 | |
| 
 | |
| struct chan_info {
 | |
| 	struct rk3288_ddr_pctl *pctl;
 | |
| 	struct rk3288_ddr_publ *publ;
 | |
| 	struct rk3188_msch *msch;
 | |
| };
 | |
| 
 | |
| struct dram_info {
 | |
| 	struct chan_info chan[1];
 | |
| 	struct ram_info info;
 | |
| 	struct clk ddr_clk;
 | |
| 	struct rk3188_cru *cru;
 | |
| 	struct rk3188_grf *grf;
 | |
| 	struct rk3188_sgrf *sgrf;
 | |
| 	struct rk3188_pmu *pmu;
 | |
| };
 | |
| 
 | |
| struct rk3188_sdram_params {
 | |
| #if CONFIG_IS_ENABLED(OF_PLATDATA)
 | |
| 	struct dtd_rockchip_rk3188_dmc of_plat;
 | |
| #endif
 | |
| 	struct rk3288_sdram_channel ch[2];
 | |
| 	struct rk3288_sdram_pctl_timing pctl_timing;
 | |
| 	struct rk3288_sdram_phy_timing phy_timing;
 | |
| 	struct rk3288_base_params base;
 | |
| 	int num_channels;
 | |
| 	struct regmap *map;
 | |
| };
 | |
| 
 | |
| const int ddrconf_table[] = {
 | |
| 	/*
 | |
| 	 * [5:4] row(13+n)
 | |
| 	 * [1:0] col(9+n), assume bw=2
 | |
| 	 * row	    col,bw
 | |
| 	 */
 | |
| 	0,
 | |
| 	((2 << DDRCONF_ROW_SHIFT) | 1 << DDRCONF_COL_SHIFT),
 | |
| 	((1 << DDRCONF_ROW_SHIFT) | 1 << DDRCONF_COL_SHIFT),
 | |
| 	((0 << DDRCONF_ROW_SHIFT) | 1 << DDRCONF_COL_SHIFT),
 | |
| 	((2 << DDRCONF_ROW_SHIFT) | 2 << DDRCONF_COL_SHIFT),
 | |
| 	((1 << DDRCONF_ROW_SHIFT) | 2 << DDRCONF_COL_SHIFT),
 | |
| 	((0 << DDRCONF_ROW_SHIFT) | 2 << DDRCONF_COL_SHIFT),
 | |
| 	((1 << DDRCONF_ROW_SHIFT) | 0 << DDRCONF_COL_SHIFT),
 | |
| 	((0 << DDRCONF_ROW_SHIFT) | 0 << DDRCONF_COL_SHIFT),
 | |
| 	0,
 | |
| 	0,
 | |
| 	0,
 | |
| 	0,
 | |
| 	0,
 | |
| 	0,
 | |
| 	0,
 | |
| };
 | |
| 
 | |
| #define TEST_PATTEN	0x5aa5f00f
 | |
| #define DQS_GATE_TRAINING_ERROR_RANK0	(1 << 4)
 | |
| #define DQS_GATE_TRAINING_ERROR_RANK1	(2 << 4)
 | |
| 
 | |
| #ifdef CONFIG_SPL_BUILD
 | |
| static void copy_to_reg(u32 *dest, const u32 *src, u32 n)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < n / sizeof(u32); i++) {
 | |
| 		writel(*src, dest);
 | |
| 		src++;
 | |
| 		dest++;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void ddr_reset(struct rk3188_cru *cru, u32 ch, u32 ctl, u32 phy)
 | |
| {
 | |
| 	u32 phy_ctl_srstn_shift = 13;
 | |
| 	u32 ctl_psrstn_shift = 11;
 | |
| 	u32 ctl_srstn_shift = 10;
 | |
| 	u32 phy_psrstn_shift = 9;
 | |
| 	u32 phy_srstn_shift = 8;
 | |
| 
 | |
| 	rk_clrsetreg(&cru->cru_softrst_con[5],
 | |
| 		     1 << phy_ctl_srstn_shift | 1 << ctl_psrstn_shift |
 | |
| 		     1 << ctl_srstn_shift | 1 << phy_psrstn_shift |
 | |
| 		     1 << phy_srstn_shift,
 | |
| 		     phy << phy_ctl_srstn_shift | ctl << ctl_psrstn_shift |
 | |
| 		     ctl << ctl_srstn_shift | phy << phy_psrstn_shift |
 | |
| 		     phy << phy_srstn_shift);
 | |
| }
 | |
| 
 | |
| static void ddr_phy_ctl_reset(struct rk3188_cru *cru, u32 ch, u32 n)
 | |
| {
 | |
| 	u32 phy_ctl_srstn_shift = 13;
 | |
| 
 | |
| 	rk_clrsetreg(&cru->cru_softrst_con[5],
 | |
| 		     1 << phy_ctl_srstn_shift, n << phy_ctl_srstn_shift);
 | |
| }
 | |
| 
 | |
| static void phy_pctrl_reset(struct rk3188_cru *cru,
 | |
| 			    struct rk3288_ddr_publ *publ,
 | |
| 			    int channel)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	ddr_reset(cru, channel, 1, 1);
 | |
| 	udelay(1);
 | |
| 	clrbits_le32(&publ->acdllcr, ACDLLCR_DLLSRST);
 | |
| 	for (i = 0; i < 4; i++)
 | |
| 		clrbits_le32(&publ->datx8[i].dxdllcr, DXDLLCR_DLLSRST);
 | |
| 
 | |
| 	udelay(10);
 | |
| 	setbits_le32(&publ->acdllcr, ACDLLCR_DLLSRST);
 | |
| 	for (i = 0; i < 4; i++)
 | |
| 		setbits_le32(&publ->datx8[i].dxdllcr, DXDLLCR_DLLSRST);
 | |
| 
 | |
| 	udelay(10);
 | |
| 	ddr_reset(cru, channel, 1, 0);
 | |
| 	udelay(10);
 | |
| 	ddr_reset(cru, channel, 0, 0);
 | |
| 	udelay(10);
 | |
| }
 | |
| 
 | |
| static void phy_dll_bypass_set(struct rk3288_ddr_publ *publ,
 | |
| 	u32 freq)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	if (freq <= 250000000) {
 | |
| 		if (freq <= 150000000)
 | |
| 			clrbits_le32(&publ->dllgcr, SBIAS_BYPASS);
 | |
| 		else
 | |
| 			setbits_le32(&publ->dllgcr, SBIAS_BYPASS);
 | |
| 		setbits_le32(&publ->acdllcr, ACDLLCR_DLLDIS);
 | |
| 		for (i = 0; i < 4; i++)
 | |
| 			setbits_le32(&publ->datx8[i].dxdllcr,
 | |
| 				     DXDLLCR_DLLDIS);
 | |
| 
 | |
| 		setbits_le32(&publ->pir, PIR_DLLBYP);
 | |
| 	} else {
 | |
| 		clrbits_le32(&publ->dllgcr, SBIAS_BYPASS);
 | |
| 		clrbits_le32(&publ->acdllcr, ACDLLCR_DLLDIS);
 | |
| 		for (i = 0; i < 4; i++) {
 | |
| 			clrbits_le32(&publ->datx8[i].dxdllcr,
 | |
| 				     DXDLLCR_DLLDIS);
 | |
| 		}
 | |
| 
 | |
| 		clrbits_le32(&publ->pir, PIR_DLLBYP);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void dfi_cfg(struct rk3288_ddr_pctl *pctl, u32 dramtype)
 | |
| {
 | |
| 	writel(DFI_INIT_START, &pctl->dfistcfg0);
 | |
| 	writel(DFI_DRAM_CLK_SR_EN | DFI_DRAM_CLK_DPD_EN,
 | |
| 	       &pctl->dfistcfg1);
 | |
| 	writel(DFI_PARITY_INTR_EN | DFI_PARITY_EN, &pctl->dfistcfg2);
 | |
| 	writel(7 << TLP_RESP_TIME_SHIFT | LP_SR_EN | LP_PD_EN,
 | |
| 	       &pctl->dfilpcfg0);
 | |
| 
 | |
| 	writel(2 << TCTRL_DELAY_TIME_SHIFT, &pctl->dfitctrldelay);
 | |
| 	writel(1 << TPHY_WRDATA_TIME_SHIFT, &pctl->dfitphywrdata);
 | |
| 	writel(0xf << TPHY_RDLAT_TIME_SHIFT, &pctl->dfitphyrdlat);
 | |
| 	writel(2 << TDRAM_CLK_DIS_TIME_SHIFT, &pctl->dfitdramclkdis);
 | |
| 	writel(2 << TDRAM_CLK_EN_TIME_SHIFT, &pctl->dfitdramclken);
 | |
| 	writel(1, &pctl->dfitphyupdtype0);
 | |
| 
 | |
| 	/* cs0 and cs1 write odt enable */
 | |
| 	writel((RANK0_ODT_WRITE_SEL | RANK1_ODT_WRITE_SEL),
 | |
| 	       &pctl->dfiodtcfg);
 | |
| 	/* odt write length */
 | |
| 	writel(7 << ODT_LEN_BL8_W_SHIFT, &pctl->dfiodtcfg1);
 | |
| 	/* phyupd and ctrlupd disabled */
 | |
| 	writel(0, &pctl->dfiupdcfg);
 | |
| }
 | |
| 
 | |
| static void ddr_set_enable(struct rk3188_grf *grf, uint channel, bool enable)
 | |
| {
 | |
| 	uint val = 0;
 | |
| 
 | |
| 	if (enable)
 | |
| 		val = 1 << DDR_16BIT_EN_SHIFT;
 | |
| 
 | |
| 	rk_clrsetreg(&grf->ddrc_con0, 1 << DDR_16BIT_EN_SHIFT, val);
 | |
| }
 | |
| 
 | |
| static void ddr_set_ddr3_mode(struct rk3188_grf *grf, uint channel,
 | |
| 			      bool ddr3_mode)
 | |
| {
 | |
| 	uint mask, val;
 | |
| 
 | |
| 	mask = MSCH4_MAINDDR3_MASK << MSCH4_MAINDDR3_SHIFT;
 | |
| 	val = ddr3_mode << MSCH4_MAINDDR3_SHIFT;
 | |
| 	rk_clrsetreg(&grf->soc_con2, mask, val);
 | |
| }
 | |
| 
 | |
| static void ddr_rank_2_row15en(struct rk3188_grf *grf, bool enable)
 | |
| {
 | |
| 	uint mask, val;
 | |
| 
 | |
| 	mask = RANK_TO_ROW15_EN_MASK << RANK_TO_ROW15_EN_SHIFT;
 | |
| 	val = enable << RANK_TO_ROW15_EN_SHIFT;
 | |
| 	rk_clrsetreg(&grf->soc_con2, mask, val);
 | |
| }
 | |
| 
 | |
| static void pctl_cfg(int channel, struct rk3288_ddr_pctl *pctl,
 | |
| 		     struct rk3188_sdram_params *sdram_params,
 | |
| 		     struct rk3188_grf *grf)
 | |
| {
 | |
| 	copy_to_reg(&pctl->togcnt1u, &sdram_params->pctl_timing.togcnt1u,
 | |
| 		    sizeof(sdram_params->pctl_timing));
 | |
| 	switch (sdram_params->base.dramtype) {
 | |
| 	case DDR3:
 | |
| 		if (sdram_params->phy_timing.mr[1] & DDR3_DLL_DISABLE) {
 | |
| 			writel(sdram_params->pctl_timing.tcl - 3,
 | |
| 			       &pctl->dfitrddataen);
 | |
| 		} else {
 | |
| 			writel(sdram_params->pctl_timing.tcl - 2,
 | |
| 			       &pctl->dfitrddataen);
 | |
| 		}
 | |
| 		writel(sdram_params->pctl_timing.tcwl - 1,
 | |
| 		       &pctl->dfitphywrlat);
 | |
| 		writel(0 << MDDR_LPDDR2_CLK_STOP_IDLE_SHIFT | DDR3_EN |
 | |
| 		       DDR2_DDR3_BL_8 | (6 - 4) << TFAW_SHIFT | PD_EXIT_SLOW |
 | |
| 		       1 << PD_TYPE_SHIFT | 0 << PD_IDLE_SHIFT,
 | |
| 		       &pctl->mcfg);
 | |
| 		ddr_set_ddr3_mode(grf, channel, true);
 | |
| 		ddr_set_enable(grf, channel, true);
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	setbits_le32(&pctl->scfg, 1);
 | |
| }
 | |
| 
 | |
| static void phy_cfg(const struct chan_info *chan, int channel,
 | |
| 		    struct rk3188_sdram_params *sdram_params)
 | |
| {
 | |
| 	struct rk3288_ddr_publ *publ = chan->publ;
 | |
| 	struct rk3188_msch *msch = chan->msch;
 | |
| 	uint ddr_freq_mhz = sdram_params->base.ddr_freq / 1000000;
 | |
| 	u32 dinit2;
 | |
| 	int i;
 | |
| 
 | |
| 	dinit2 = DIV_ROUND_UP(ddr_freq_mhz * 200000, 1000);
 | |
| 	/* DDR PHY Timing */
 | |
| 	copy_to_reg(&publ->dtpr[0], &sdram_params->phy_timing.dtpr0,
 | |
| 		    sizeof(sdram_params->phy_timing));
 | |
| 	writel(sdram_params->base.noc_timing, &msch->ddrtiming);
 | |
| 	writel(0x3f, &msch->readlatency);
 | |
| 	writel(DIV_ROUND_UP(ddr_freq_mhz * 5120, 1000) << PRT_DLLLOCK_SHIFT |
 | |
| 	       DIV_ROUND_UP(ddr_freq_mhz * 50, 1000) << PRT_DLLSRST_SHIFT |
 | |
| 	       8 << PRT_ITMSRST_SHIFT, &publ->ptr[0]);
 | |
| 	writel(DIV_ROUND_UP(ddr_freq_mhz * 500000, 1000) << PRT_DINIT0_SHIFT |
 | |
| 	       DIV_ROUND_UP(ddr_freq_mhz * 400, 1000) << PRT_DINIT1_SHIFT,
 | |
| 	       &publ->ptr[1]);
 | |
| 	writel(min(dinit2, 0x1ffffU) << PRT_DINIT2_SHIFT |
 | |
| 	       DIV_ROUND_UP(ddr_freq_mhz * 1000, 1000) << PRT_DINIT3_SHIFT,
 | |
| 	       &publ->ptr[2]);
 | |
| 
 | |
| 	switch (sdram_params->base.dramtype) {
 | |
| 	case DDR3:
 | |
| 		clrbits_le32(&publ->pgcr, 0x1f);
 | |
| 		clrsetbits_le32(&publ->dcr, DDRMD_MASK << DDRMD_SHIFT,
 | |
| 				DDRMD_DDR3 << DDRMD_SHIFT);
 | |
| 		break;
 | |
| 	}
 | |
| 	if (sdram_params->base.odt) {
 | |
| 		/*dynamic RTT enable */
 | |
| 		for (i = 0; i < 4; i++)
 | |
| 			setbits_le32(&publ->datx8[i].dxgcr, DQSRTT | DQRTT);
 | |
| 	} else {
 | |
| 		/*dynamic RTT disable */
 | |
| 		for (i = 0; i < 4; i++)
 | |
| 			clrbits_le32(&publ->datx8[i].dxgcr, DQSRTT | DQRTT);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void phy_init(struct rk3288_ddr_publ *publ)
 | |
| {
 | |
| 	setbits_le32(&publ->pir, PIR_INIT | PIR_DLLSRST
 | |
| 		| PIR_DLLLOCK | PIR_ZCAL | PIR_ITMSRST | PIR_CLRSR);
 | |
| 	udelay(1);
 | |
| 	while ((readl(&publ->pgsr) &
 | |
| 		(PGSR_IDONE | PGSR_DLDONE | PGSR_ZCDONE)) !=
 | |
| 		(PGSR_IDONE | PGSR_DLDONE | PGSR_ZCDONE))
 | |
| 		;
 | |
| }
 | |
| 
 | |
| static void send_command(struct rk3288_ddr_pctl *pctl, u32 rank,
 | |
| 			 u32 cmd, u32 arg)
 | |
| {
 | |
| 	writel((START_CMD | (rank << 20) | arg | cmd), &pctl->mcmd);
 | |
| 	udelay(1);
 | |
| 	while (readl(&pctl->mcmd) & START_CMD)
 | |
| 		;
 | |
| }
 | |
| 
 | |
| static inline void send_command_op(struct rk3288_ddr_pctl *pctl,
 | |
| 				   u32 rank, u32 cmd, u32 ma, u32 op)
 | |
| {
 | |
| 	send_command(pctl, rank, cmd, (ma & LPDDR2_MA_MASK) << LPDDR2_MA_SHIFT |
 | |
| 		     (op & LPDDR2_OP_MASK) << LPDDR2_OP_SHIFT);
 | |
| }
 | |
| 
 | |
| static void memory_init(struct rk3288_ddr_publ *publ,
 | |
| 			u32 dramtype)
 | |
| {
 | |
| 	setbits_le32(&publ->pir,
 | |
| 		     (PIR_INIT | PIR_DRAMINIT | PIR_LOCKBYP
 | |
| 		      | PIR_ZCALBYP | PIR_CLRSR | PIR_ICPC
 | |
| 		      | (dramtype == DDR3 ? PIR_DRAMRST : 0)));
 | |
| 	udelay(1);
 | |
| 	while ((readl(&publ->pgsr) & (PGSR_IDONE | PGSR_DLDONE))
 | |
| 		!= (PGSR_IDONE | PGSR_DLDONE))
 | |
| 		;
 | |
| }
 | |
| 
 | |
| static void move_to_config_state(struct rk3288_ddr_publ *publ,
 | |
| 				 struct rk3288_ddr_pctl *pctl)
 | |
| {
 | |
| 	unsigned int state;
 | |
| 
 | |
| 	while (1) {
 | |
| 		state = readl(&pctl->stat) & PCTL_STAT_MSK;
 | |
| 
 | |
| 		switch (state) {
 | |
| 		case LOW_POWER:
 | |
| 			writel(WAKEUP_STATE, &pctl->sctl);
 | |
| 			while ((readl(&pctl->stat) & PCTL_STAT_MSK)
 | |
| 				!= ACCESS)
 | |
| 				;
 | |
| 			/* wait DLL lock */
 | |
| 			while ((readl(&publ->pgsr) & PGSR_DLDONE)
 | |
| 				!= PGSR_DLDONE)
 | |
| 				;
 | |
| 			/*
 | |
| 			 * if at low power state,need wakeup first,
 | |
| 			 * and then enter the config, so
 | |
| 			 * fallthrough
 | |
| 			 */
 | |
| 		case ACCESS:
 | |
| 			/* fallthrough */
 | |
| 		case INIT_MEM:
 | |
| 			writel(CFG_STATE, &pctl->sctl);
 | |
| 			while ((readl(&pctl->stat) & PCTL_STAT_MSK) != CONFIG)
 | |
| 				;
 | |
| 			break;
 | |
| 		case CONFIG:
 | |
| 			return;
 | |
| 		default:
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void set_bandwidth_ratio(const struct chan_info *chan, int channel,
 | |
| 				u32 n, struct rk3188_grf *grf)
 | |
| {
 | |
| 	struct rk3288_ddr_pctl *pctl = chan->pctl;
 | |
| 	struct rk3288_ddr_publ *publ = chan->publ;
 | |
| 	struct rk3188_msch *msch = chan->msch;
 | |
| 
 | |
| 	if (n == 1) {
 | |
| 		setbits_le32(&pctl->ppcfg, 1);
 | |
| 		ddr_set_enable(grf, channel, 1);
 | |
| 		setbits_le32(&msch->ddrtiming, 1 << 31);
 | |
| 		/* Data Byte disable*/
 | |
| 		clrbits_le32(&publ->datx8[2].dxgcr, 1);
 | |
| 		clrbits_le32(&publ->datx8[3].dxgcr, 1);
 | |
| 		/* disable DLL */
 | |
| 		setbits_le32(&publ->datx8[2].dxdllcr, DXDLLCR_DLLDIS);
 | |
| 		setbits_le32(&publ->datx8[3].dxdllcr, DXDLLCR_DLLDIS);
 | |
| 	} else {
 | |
| 		clrbits_le32(&pctl->ppcfg, 1);
 | |
| 		ddr_set_enable(grf, channel, 0);
 | |
| 		clrbits_le32(&msch->ddrtiming, 1 << 31);
 | |
| 		/* Data Byte enable*/
 | |
| 		setbits_le32(&publ->datx8[2].dxgcr, 1);
 | |
| 		setbits_le32(&publ->datx8[3].dxgcr, 1);
 | |
| 
 | |
| 		/* enable DLL */
 | |
| 		clrbits_le32(&publ->datx8[2].dxdllcr, DXDLLCR_DLLDIS);
 | |
| 		clrbits_le32(&publ->datx8[3].dxdllcr, DXDLLCR_DLLDIS);
 | |
| 		/* reset DLL */
 | |
| 		clrbits_le32(&publ->datx8[2].dxdllcr, DXDLLCR_DLLSRST);
 | |
| 		clrbits_le32(&publ->datx8[3].dxdllcr, DXDLLCR_DLLSRST);
 | |
| 		udelay(10);
 | |
| 		setbits_le32(&publ->datx8[2].dxdllcr, DXDLLCR_DLLSRST);
 | |
| 		setbits_le32(&publ->datx8[3].dxdllcr, DXDLLCR_DLLSRST);
 | |
| 	}
 | |
| 	setbits_le32(&pctl->dfistcfg0, 1 << 2);
 | |
| }
 | |
| 
 | |
| static int data_training(const struct chan_info *chan, int channel,
 | |
| 			 struct rk3188_sdram_params *sdram_params)
 | |
| {
 | |
| 	unsigned int j;
 | |
| 	int ret = 0;
 | |
| 	u32 rank;
 | |
| 	int i;
 | |
| 	u32 step[2] = { PIR_QSTRN, PIR_RVTRN };
 | |
| 	struct rk3288_ddr_publ *publ = chan->publ;
 | |
| 	struct rk3288_ddr_pctl *pctl = chan->pctl;
 | |
| 
 | |
| 	/* disable auto refresh */
 | |
| 	writel(0, &pctl->trefi);
 | |
| 
 | |
| 	if (sdram_params->base.dramtype != LPDDR3)
 | |
| 		setbits_le32(&publ->pgcr, 1 << PGCR_DQSCFG_SHIFT);
 | |
| 	rank = sdram_params->ch[channel].rank | 1;
 | |
| 	for (j = 0; j < ARRAY_SIZE(step); j++) {
 | |
| 		/*
 | |
| 		 * trigger QSTRN and RVTRN
 | |
| 		 * clear DTDONE status
 | |
| 		 */
 | |
| 		setbits_le32(&publ->pir, PIR_CLRSR);
 | |
| 
 | |
| 		/* trigger DTT */
 | |
| 		setbits_le32(&publ->pir,
 | |
| 			     PIR_INIT | step[j] | PIR_LOCKBYP | PIR_ZCALBYP |
 | |
| 			     PIR_CLRSR);
 | |
| 		udelay(1);
 | |
| 		/* wait echo byte DTDONE */
 | |
| 		while ((readl(&publ->datx8[0].dxgsr[0]) & rank)
 | |
| 			!= rank)
 | |
| 			;
 | |
| 		while ((readl(&publ->datx8[1].dxgsr[0]) & rank)
 | |
| 			!= rank)
 | |
| 			;
 | |
| 		if (!(readl(&pctl->ppcfg) & 1)) {
 | |
| 			while ((readl(&publ->datx8[2].dxgsr[0])
 | |
| 				& rank) != rank)
 | |
| 				;
 | |
| 			while ((readl(&publ->datx8[3].dxgsr[0])
 | |
| 				& rank) != rank)
 | |
| 				;
 | |
| 		}
 | |
| 		if (readl(&publ->pgsr) &
 | |
| 		    (PGSR_DTERR | PGSR_RVERR | PGSR_RVEIRR)) {
 | |
| 			ret = -1;
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 	/* send some auto refresh to complement the lost while DTT */
 | |
| 	for (i = 0; i < (rank > 1 ? 8 : 4); i++)
 | |
| 		send_command(pctl, rank, REF_CMD, 0);
 | |
| 
 | |
| 	if (sdram_params->base.dramtype != LPDDR3)
 | |
| 		clrbits_le32(&publ->pgcr, 1 << PGCR_DQSCFG_SHIFT);
 | |
| 
 | |
| 	/* resume auto refresh */
 | |
| 	writel(sdram_params->pctl_timing.trefi, &pctl->trefi);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void move_to_access_state(const struct chan_info *chan)
 | |
| {
 | |
| 	struct rk3288_ddr_publ *publ = chan->publ;
 | |
| 	struct rk3288_ddr_pctl *pctl = chan->pctl;
 | |
| 	unsigned int state;
 | |
| 
 | |
| 	while (1) {
 | |
| 		state = readl(&pctl->stat) & PCTL_STAT_MSK;
 | |
| 
 | |
| 		switch (state) {
 | |
| 		case LOW_POWER:
 | |
| 			if (((readl(&pctl->stat) >> LP_TRIG_SHIFT) &
 | |
| 					LP_TRIG_MASK) == 1)
 | |
| 				return;
 | |
| 
 | |
| 			writel(WAKEUP_STATE, &pctl->sctl);
 | |
| 			while ((readl(&pctl->stat) & PCTL_STAT_MSK) != ACCESS)
 | |
| 				;
 | |
| 			/* wait DLL lock */
 | |
| 			while ((readl(&publ->pgsr) & PGSR_DLDONE)
 | |
| 				!= PGSR_DLDONE)
 | |
| 				;
 | |
| 			break;
 | |
| 		case INIT_MEM:
 | |
| 			writel(CFG_STATE, &pctl->sctl);
 | |
| 			while ((readl(&pctl->stat) & PCTL_STAT_MSK) != CONFIG)
 | |
| 				;
 | |
| 			/* fallthrough */
 | |
| 		case CONFIG:
 | |
| 			writel(GO_STATE, &pctl->sctl);
 | |
| 			while ((readl(&pctl->stat) & PCTL_STAT_MSK) == CONFIG)
 | |
| 				;
 | |
| 			break;
 | |
| 		case ACCESS:
 | |
| 			return;
 | |
| 		default:
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void dram_cfg_rbc(const struct chan_info *chan, u32 chnum,
 | |
| 			 struct rk3188_sdram_params *sdram_params)
 | |
| {
 | |
| 	struct rk3288_ddr_publ *publ = chan->publ;
 | |
| 
 | |
| 	if (sdram_params->ch[chnum].bk == 3)
 | |
| 		clrsetbits_le32(&publ->dcr, PDQ_MASK << PDQ_SHIFT,
 | |
| 				1 << PDQ_SHIFT);
 | |
| 	else
 | |
| 		clrbits_le32(&publ->dcr, PDQ_MASK << PDQ_SHIFT);
 | |
| 
 | |
| 	writel(sdram_params->base.ddrconfig, &chan->msch->ddrconf);
 | |
| }
 | |
| 
 | |
| static void dram_all_config(const struct dram_info *dram,
 | |
| 			    struct rk3188_sdram_params *sdram_params)
 | |
| {
 | |
| 	unsigned int chan;
 | |
| 	u32 sys_reg = 0;
 | |
| 
 | |
| 	sys_reg |= sdram_params->base.dramtype << SYS_REG_DDRTYPE_SHIFT;
 | |
| 	sys_reg |= (sdram_params->num_channels - 1) << SYS_REG_NUM_CH_SHIFT;
 | |
| 	for (chan = 0; chan < sdram_params->num_channels; chan++) {
 | |
| 		const struct rk3288_sdram_channel *info =
 | |
| 			&sdram_params->ch[chan];
 | |
| 
 | |
| 		sys_reg |= info->row_3_4 << SYS_REG_ROW_3_4_SHIFT(chan);
 | |
| 		sys_reg |= 1 << SYS_REG_CHINFO_SHIFT(chan);
 | |
| 		sys_reg |= (info->rank - 1) << SYS_REG_RANK_SHIFT(chan);
 | |
| 		sys_reg |= (info->col - 9) << SYS_REG_COL_SHIFT(chan);
 | |
| 		sys_reg |= info->bk == 3 ? 0 : 1 << SYS_REG_BK_SHIFT(chan);
 | |
| 		sys_reg |= (info->cs0_row - 13) << SYS_REG_CS0_ROW_SHIFT(chan);
 | |
| 		sys_reg |= (info->cs1_row - 13) << SYS_REG_CS1_ROW_SHIFT(chan);
 | |
| 		sys_reg |= (2 >> info->bw) << SYS_REG_BW_SHIFT(chan);
 | |
| 		sys_reg |= (2 >> info->dbw) << SYS_REG_DBW_SHIFT(chan);
 | |
| 
 | |
| 		dram_cfg_rbc(&dram->chan[chan], chan, sdram_params);
 | |
| 	}
 | |
| 	if (sdram_params->ch[0].rank == 2)
 | |
| 		ddr_rank_2_row15en(dram->grf, 0);
 | |
| 	else
 | |
| 		ddr_rank_2_row15en(dram->grf, 1);
 | |
| 
 | |
| 	writel(sys_reg, &dram->pmu->sys_reg[2]);
 | |
| }
 | |
| 
 | |
| static int sdram_rank_bw_detect(struct dram_info *dram, int channel,
 | |
| 		struct rk3188_sdram_params *sdram_params)
 | |
| {
 | |
| 	int reg;
 | |
| 	int need_trainig = 0;
 | |
| 	const struct chan_info *chan = &dram->chan[channel];
 | |
| 	struct rk3288_ddr_publ *publ = chan->publ;
 | |
| 
 | |
| 	ddr_rank_2_row15en(dram->grf, 0);
 | |
| 
 | |
| 	if (data_training(chan, channel, sdram_params) < 0) {
 | |
| 		printf("first data training fail!\n");
 | |
| 		reg = readl(&publ->datx8[0].dxgsr[0]);
 | |
| 		/* Check the result for rank 0 */
 | |
| 		if ((channel == 0) && (reg & DQS_GATE_TRAINING_ERROR_RANK0)) {
 | |
| 			printf("data training fail!\n");
 | |
| 			return -EIO;
 | |
| 		}
 | |
| 
 | |
| 		/* Check the result for rank 1 */
 | |
| 		if (reg & DQS_GATE_TRAINING_ERROR_RANK1) {
 | |
| 			sdram_params->ch[channel].rank = 1;
 | |
| 			clrsetbits_le32(&publ->pgcr, 0xF << 18,
 | |
| 					sdram_params->ch[channel].rank << 18);
 | |
| 			need_trainig = 1;
 | |
| 		}
 | |
| 		reg = readl(&publ->datx8[2].dxgsr[0]);
 | |
| 		if (reg & (1 << 4)) {
 | |
| 			sdram_params->ch[channel].bw = 1;
 | |
| 			set_bandwidth_ratio(chan, channel,
 | |
| 					    sdram_params->ch[channel].bw,
 | |
| 					    dram->grf);
 | |
| 			need_trainig = 1;
 | |
| 		}
 | |
| 	}
 | |
| 	/* Assume the Die bit width are the same with the chip bit width */
 | |
| 	sdram_params->ch[channel].dbw = sdram_params->ch[channel].bw;
 | |
| 
 | |
| 	if (need_trainig &&
 | |
| 	    (data_training(chan, channel, sdram_params) < 0)) {
 | |
| 		if (sdram_params->base.dramtype == LPDDR3) {
 | |
| 			ddr_phy_ctl_reset(dram->cru, channel, 1);
 | |
| 			udelay(10);
 | |
| 			ddr_phy_ctl_reset(dram->cru, channel, 0);
 | |
| 			udelay(10);
 | |
| 		}
 | |
| 		printf("2nd data training failed!");
 | |
| 		return -EIO;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Detect ram columns and rows.
 | |
|  * @dram: dram info struct
 | |
|  * @channel: channel number to handle
 | |
|  * @sdram_params: sdram parameters, function will fill in col and row values
 | |
|  *
 | |
|  * Returns 0 or negative on error.
 | |
|  */
 | |
| static int sdram_col_row_detect(struct dram_info *dram, int channel,
 | |
| 		struct rk3188_sdram_params *sdram_params)
 | |
| {
 | |
| 	int row, col;
 | |
| 	unsigned int addr;
 | |
| 	const struct chan_info *chan = &dram->chan[channel];
 | |
| 	struct rk3288_ddr_pctl *pctl = chan->pctl;
 | |
| 	struct rk3288_ddr_publ *publ = chan->publ;
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	/* Detect col */
 | |
| 	for (col = 11; col >= 9; col--) {
 | |
| 		writel(0, CFG_SYS_SDRAM_BASE);
 | |
| 		addr = CFG_SYS_SDRAM_BASE +
 | |
| 			(1 << (col + sdram_params->ch[channel].bw - 1));
 | |
| 		writel(TEST_PATTEN, addr);
 | |
| 		if ((readl(addr) == TEST_PATTEN) &&
 | |
| 		    (readl(CFG_SYS_SDRAM_BASE) == 0))
 | |
| 			break;
 | |
| 	}
 | |
| 	if (col == 8) {
 | |
| 		printf("Col detect error\n");
 | |
| 		ret = -EINVAL;
 | |
| 		goto out;
 | |
| 	} else {
 | |
| 		sdram_params->ch[channel].col = col;
 | |
| 	}
 | |
| 
 | |
| 	ddr_rank_2_row15en(dram->grf, 1);
 | |
| 	move_to_config_state(publ, pctl);
 | |
| 	writel(1, &chan->msch->ddrconf);
 | |
| 	move_to_access_state(chan);
 | |
| 	/* Detect row, max 15,min13 in rk3188*/
 | |
| 	for (row = 16; row >= 13; row--) {
 | |
| 		writel(0, CFG_SYS_SDRAM_BASE);
 | |
| 		addr = CFG_SYS_SDRAM_BASE + (1 << (row + 15 - 1));
 | |
| 		writel(TEST_PATTEN, addr);
 | |
| 		if ((readl(addr) == TEST_PATTEN) &&
 | |
| 		    (readl(CFG_SYS_SDRAM_BASE) == 0))
 | |
| 			break;
 | |
| 	}
 | |
| 	if (row == 12) {
 | |
| 		printf("Row detect error\n");
 | |
| 		ret = -EINVAL;
 | |
| 	} else {
 | |
| 		sdram_params->ch[channel].cs1_row = row;
 | |
| 		sdram_params->ch[channel].row_3_4 = 0;
 | |
| 		debug("chn %d col %d, row %d\n", channel, col, row);
 | |
| 		sdram_params->ch[channel].cs0_row = row;
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int sdram_get_niu_config(struct rk3188_sdram_params *sdram_params)
 | |
| {
 | |
| 	int i, tmp, size, row, ret = 0;
 | |
| 
 | |
| 	row = sdram_params->ch[0].cs0_row;
 | |
| 	/*
 | |
| 	 * RK3188 share the rank and row bit15, we use same ddr config for 15bit
 | |
| 	 * and 16bit row
 | |
| 	 */
 | |
| 	if (row == 16)
 | |
| 		row = 15;
 | |
| 	tmp = sdram_params->ch[0].col - 9;
 | |
| 	tmp -= (sdram_params->ch[0].bw == 2) ? 0 : 1;
 | |
| 	tmp |= ((row - 13) << 4);
 | |
| 	size = sizeof(ddrconf_table)/sizeof(ddrconf_table[0]);
 | |
| 	for (i = 0; i < size; i++)
 | |
| 		if (tmp == ddrconf_table[i])
 | |
| 			break;
 | |
| 	if (i >= size) {
 | |
| 		printf("niu config not found\n");
 | |
| 		ret = -EINVAL;
 | |
| 	} else {
 | |
| 		debug("niu config %d\n", i);
 | |
| 		sdram_params->base.ddrconfig = i;
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int sdram_init(struct dram_info *dram,
 | |
| 		      struct rk3188_sdram_params *sdram_params)
 | |
| {
 | |
| 	int channel;
 | |
| 	int zqcr;
 | |
| 	int ret;
 | |
| 
 | |
| 	if ((sdram_params->base.dramtype == DDR3 &&
 | |
| 	     sdram_params->base.ddr_freq > 800000000)) {
 | |
| 		printf("SDRAM frequency is too high!");
 | |
| 		return -E2BIG;
 | |
| 	}
 | |
| 
 | |
| 	ret = clk_set_rate(&dram->ddr_clk, sdram_params->base.ddr_freq);
 | |
| 	if (ret) {
 | |
| 		printf("Could not set DDR clock\n");
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	for (channel = 0; channel < 1; channel++) {
 | |
| 		const struct chan_info *chan = &dram->chan[channel];
 | |
| 		struct rk3288_ddr_pctl *pctl = chan->pctl;
 | |
| 		struct rk3288_ddr_publ *publ = chan->publ;
 | |
| 
 | |
| 		phy_pctrl_reset(dram->cru, publ, channel);
 | |
| 		phy_dll_bypass_set(publ, sdram_params->base.ddr_freq);
 | |
| 
 | |
| 		dfi_cfg(pctl, sdram_params->base.dramtype);
 | |
| 
 | |
| 		pctl_cfg(channel, pctl, sdram_params, dram->grf);
 | |
| 
 | |
| 		phy_cfg(chan, channel, sdram_params);
 | |
| 
 | |
| 		phy_init(publ);
 | |
| 
 | |
| 		writel(POWER_UP_START, &pctl->powctl);
 | |
| 		while (!(readl(&pctl->powstat) & POWER_UP_DONE))
 | |
| 			;
 | |
| 
 | |
| 		memory_init(publ, sdram_params->base.dramtype);
 | |
| 		move_to_config_state(publ, pctl);
 | |
| 
 | |
| 		/* Using 32bit bus width for detect */
 | |
| 		sdram_params->ch[channel].bw = 2;
 | |
| 		set_bandwidth_ratio(chan, channel,
 | |
| 				    sdram_params->ch[channel].bw, dram->grf);
 | |
| 		/*
 | |
| 		 * set cs, using n=3 for detect
 | |
| 		 * CS0, n=1
 | |
| 		 * CS1, n=2
 | |
| 		 * CS0 & CS1, n = 3
 | |
| 		 */
 | |
| 		sdram_params->ch[channel].rank = 2;
 | |
| 		clrsetbits_le32(&publ->pgcr, 0xF << 18,
 | |
| 				(sdram_params->ch[channel].rank | 1) << 18);
 | |
| 
 | |
| 		/* DS=40ohm,ODT=155ohm */
 | |
| 		zqcr = 1 << ZDEN_SHIFT | 2 << PU_ONDIE_SHIFT |
 | |
| 			2 << PD_ONDIE_SHIFT | 0x19 << PU_OUTPUT_SHIFT |
 | |
| 			0x19 << PD_OUTPUT_SHIFT;
 | |
| 		writel(zqcr, &publ->zq1cr[0]);
 | |
| 		writel(zqcr, &publ->zq0cr[0]);
 | |
| 
 | |
| 		/* Detect the rank and bit-width with data-training */
 | |
| 		writel(1, &chan->msch->ddrconf);
 | |
| 		sdram_rank_bw_detect(dram, channel, sdram_params);
 | |
| 
 | |
| 		if (sdram_params->base.dramtype == LPDDR3) {
 | |
| 			u32 i;
 | |
| 			writel(0, &pctl->mrrcfg0);
 | |
| 			for (i = 0; i < 17; i++)
 | |
| 				send_command_op(pctl, 1, MRR_CMD, i, 0);
 | |
| 		}
 | |
| 		writel(4, &chan->msch->ddrconf);
 | |
| 		move_to_access_state(chan);
 | |
| 		/* DDR3 and LPDDR3 are always 8 bank, no need detect */
 | |
| 		sdram_params->ch[channel].bk = 3;
 | |
| 		/* Detect Col and Row number*/
 | |
| 		ret = sdram_col_row_detect(dram, channel, sdram_params);
 | |
| 		if (ret)
 | |
| 			goto error;
 | |
| 	}
 | |
| 	/* Find NIU DDR configuration */
 | |
| 	ret = sdram_get_niu_config(sdram_params);
 | |
| 	if (ret)
 | |
| 		goto error;
 | |
| 
 | |
| 	dram_all_config(dram, sdram_params);
 | |
| 	debug("%s done\n", __func__);
 | |
| 
 | |
| 	return 0;
 | |
| error:
 | |
| 	printf("DRAM init failed!\n");
 | |
| 	hang();
 | |
| }
 | |
| 
 | |
| static int setup_sdram(struct udevice *dev)
 | |
| {
 | |
| 	struct dram_info *priv = dev_get_priv(dev);
 | |
| 	struct rk3188_sdram_params *params = dev_get_plat(dev);
 | |
| 
 | |
| 	return sdram_init(priv, params);
 | |
| }
 | |
| 
 | |
| static int rk3188_dmc_of_to_plat(struct udevice *dev)
 | |
| {
 | |
| 	struct rk3188_sdram_params *params = dev_get_plat(dev);
 | |
| 	int ret;
 | |
| 
 | |
| 	if (!CONFIG_IS_ENABLED(OF_REAL))
 | |
| 		return 0;
 | |
| 
 | |
| 	/* rk3188 supports only one-channel */
 | |
| 	params->num_channels = 1;
 | |
| 	ret = dev_read_u32_array(dev, "rockchip,pctl-timing",
 | |
| 				 (u32 *)¶ms->pctl_timing,
 | |
| 				 sizeof(params->pctl_timing) / sizeof(u32));
 | |
| 	if (ret) {
 | |
| 		printf("%s: Cannot read rockchip,pctl-timing\n", __func__);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	ret = dev_read_u32_array(dev, "rockchip,phy-timing",
 | |
| 				 (u32 *)¶ms->phy_timing,
 | |
| 				 sizeof(params->phy_timing) / sizeof(u32));
 | |
| 	if (ret) {
 | |
| 		printf("%s: Cannot read rockchip,phy-timing\n", __func__);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	ret = dev_read_u32_array(dev, "rockchip,sdram-params",
 | |
| 				 (u32 *)¶ms->base,
 | |
| 				 sizeof(params->base) / sizeof(u32));
 | |
| 	if (ret) {
 | |
| 		printf("%s: Cannot read rockchip,sdram-params\n", __func__);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	ret = regmap_init_mem(dev_ofnode(dev), ¶ms->map);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #endif /* CONFIG_SPL_BUILD */
 | |
| 
 | |
| #if CONFIG_IS_ENABLED(OF_PLATDATA)
 | |
| static int conv_of_plat(struct udevice *dev)
 | |
| {
 | |
| 	struct rk3188_sdram_params *plat = dev_get_plat(dev);
 | |
| 	struct dtd_rockchip_rk3188_dmc *of_plat = &plat->of_plat;
 | |
| 	int ret;
 | |
| 
 | |
| 	memcpy(&plat->pctl_timing, of_plat->rockchip_pctl_timing,
 | |
| 	       sizeof(plat->pctl_timing));
 | |
| 	memcpy(&plat->phy_timing, of_plat->rockchip_phy_timing,
 | |
| 	       sizeof(plat->phy_timing));
 | |
| 	memcpy(&plat->base, of_plat->rockchip_sdram_params, sizeof(plat->base));
 | |
| 	/* rk3188 supports dual-channel, set default channel num to 2 */
 | |
| 	plat->num_channels = 1;
 | |
| 	ret = regmap_init_mem_plat(dev, of_plat->reg, sizeof(of_plat->reg[0]),
 | |
| 				   ARRAY_SIZE(of_plat->reg) / 2, &plat->map);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static int rk3188_dmc_probe(struct udevice *dev)
 | |
| {
 | |
| #ifdef CONFIG_SPL_BUILD
 | |
| 	struct rk3188_sdram_params *plat = dev_get_plat(dev);
 | |
| 	struct regmap *map;
 | |
| 	struct udevice *dev_clk;
 | |
| 	int ret;
 | |
| #endif
 | |
| 	struct dram_info *priv = dev_get_priv(dev);
 | |
| 
 | |
| 	priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU);
 | |
| 
 | |
| #ifdef CONFIG_SPL_BUILD
 | |
| #if CONFIG_IS_ENABLED(OF_PLATDATA)
 | |
| 	ret = conv_of_plat(dev);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| #endif
 | |
| 	map = syscon_get_regmap_by_driver_data(ROCKCHIP_SYSCON_NOC);
 | |
| 	if (IS_ERR(map))
 | |
| 		return PTR_ERR(map);
 | |
| 	priv->chan[0].msch = regmap_get_range(map, 0);
 | |
| 
 | |
| 	priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
 | |
| 
 | |
| 	priv->chan[0].pctl = regmap_get_range(plat->map, 0);
 | |
| 	priv->chan[0].publ = regmap_get_range(plat->map, 1);
 | |
| 
 | |
| 	ret = rockchip_get_clk(&dev_clk);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 	priv->ddr_clk.id = CLK_DDR;
 | |
| 	ret = clk_request(dev_clk, &priv->ddr_clk);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	priv->cru = rockchip_get_cru();
 | |
| 	if (IS_ERR(priv->cru))
 | |
| 		return PTR_ERR(priv->cru);
 | |
| 	ret = setup_sdram(dev);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| #else
 | |
| 	priv->info.base = CFG_SYS_SDRAM_BASE;
 | |
| 	priv->info.size = rockchip_sdram_size(
 | |
| 				(phys_addr_t)&priv->pmu->sys_reg[2]);
 | |
| #endif
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int rk3188_dmc_get_info(struct udevice *dev, struct ram_info *info)
 | |
| {
 | |
| 	struct dram_info *priv = dev_get_priv(dev);
 | |
| 
 | |
| 	*info = priv->info;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct ram_ops rk3188_dmc_ops = {
 | |
| 	.get_info = rk3188_dmc_get_info,
 | |
| };
 | |
| 
 | |
| static const struct udevice_id rk3188_dmc_ids[] = {
 | |
| 	{ .compatible = "rockchip,rk3188-dmc" },
 | |
| 	{ }
 | |
| };
 | |
| 
 | |
| U_BOOT_DRIVER(rockchip_rk3188_dmc) = {
 | |
| 	.name = "rockchip_rk3188_dmc",
 | |
| 	.id = UCLASS_RAM,
 | |
| 	.of_match = rk3188_dmc_ids,
 | |
| 	.ops = &rk3188_dmc_ops,
 | |
| #ifdef CONFIG_SPL_BUILD
 | |
| 	.of_to_plat = rk3188_dmc_of_to_plat,
 | |
| #endif
 | |
| 	.probe = rk3188_dmc_probe,
 | |
| 	.priv_auto	= sizeof(struct dram_info),
 | |
| #ifdef CONFIG_SPL_BUILD
 | |
| 	.plat_auto	= sizeof(struct rk3188_sdram_params),
 | |
| #endif
 | |
| };
 |