mirror of
https://github.com/smaeul/u-boot.git
synced 2025-10-31 03:58:17 +00:00
60971e63e6
Add the description of CLI commands to the generated index. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
73 lines
1.8 KiB
ReStructuredText
73 lines
1.8 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+:
|
|
|
|
.. index::
|
|
single: ebtupdate (command)
|
|
|
|
ebtupdate command
|
|
=================
|
|
|
|
Synopsis
|
|
--------
|
|
|
|
::
|
|
|
|
ebtupdate [<bct> [<ebt>] [<size>]]
|
|
|
|
Description
|
|
-----------
|
|
|
|
The "ebtupdate" command is used to self-update bootloader on Tegra 2 and Tegra 3
|
|
production devices which were processed using re-cryption.
|
|
|
|
The "ebtupdate" performs encryption of new bootloader and decryption, patching
|
|
and re-encryption of BCT "in situ". After BCT and bootloader can be written in
|
|
their respective places.
|
|
|
|
bct
|
|
address of BCT block pre-loaded into RAM.
|
|
|
|
ebt
|
|
address of the bootloader pre-loaded into RAM.
|
|
|
|
size
|
|
size of the pre-loaded bootloader.
|
|
|
|
Example
|
|
-------
|
|
|
|
This is the boot log of a LG Optimus Vu:
|
|
|
|
::
|
|
|
|
=> mmc dev 0 1
|
|
switch to partitions #1, OK
|
|
mmc0(part 1) is current device
|
|
=> mmc read $kernel_addr_r 0 $boot_block_size
|
|
MMC read: dev # 0, block # 0, count 4096 ... 4096 blocks read: OK
|
|
=> load mmc 0:1 $ramdisk_addr_r $bootloader_file
|
|
684783 bytes read in 44 ms (14.8 MiB/s)
|
|
=> size mmc 0:1 $bootloader_file
|
|
=> ebtupdate $kernel_addr_r $ramdisk_addr_r $filesize
|
|
=> mmc dev 0 1
|
|
switch to partitions #1, OK
|
|
mmc0(part 1) is current device
|
|
=> mmc write $kernel_addr_r 0 $boot_block_size
|
|
MMC write: dev # 0, block # 0, count 4096 ... 4096 blocks written: OK
|
|
=> mmc dev 0 2
|
|
switch to partitions #2, OK
|
|
mmc0(part 2) is current device
|
|
=> mmc write $ramdisk_addr_r 0 $boot_block_size
|
|
MMC write: dev # 0, block # 0, count 4096 ... 4096 blocks written: OK
|
|
|
|
Configuration
|
|
-------------
|
|
|
|
The ebtupdate command is only available if CONFIG_CMD_EBTUPDATE=y and
|
|
only on Tegra 2 and Tegra 3 configurations.
|
|
|
|
Return value
|
|
------------
|
|
|
|
The return value $? is set to 0 (true) if everything went successfully. If an
|
|
error occurs, the return value $? is set to 1 (false).
|