mirror of
https://github.com/smaeul/u-boot.git
synced 2025-11-03 21:48:15 +00:00
164 lines
4.3 KiB
Plaintext
164 lines
4.3 KiB
Plaintext
After several heart-struck failure, I got one workable way to program
|
|
each other in FLASH between PlanetCore and U-Boot.
|
|
|
|
Hardware Platform : RPXlite DW(EP 823 H1 DW)
|
|
|
|
1. From U-Boot to PlanetCore
|
|
|
|
Utilities : PlanetCore Boot Loader - PCL200.mot
|
|
|
|
[root@sam tftpboot]# ppc_8xx-objcopy -O ppcboot
|
|
PCL200.mot pcl200.bin
|
|
|
|
[Target Operation]
|
|
u-boot>t 100000 pcl200.bin
|
|
u-boot>go 0x100000
|
|
## Starting application at 0x00100000 ...
|
|
|
|
MPC8xx PlanetCore Flash Burner v2.00
|
|
Copyright 2001 Embedded Planet. All rights reserved.
|
|
|
|
Construct Flash Device.....done.
|
|
|
|
|
|
Program MPC8xx PlanetCore Boot Loader v2.00
|
|
Built Sep 19, 2001 at 14:34:42
|
|
Image located from FC000000 to FC01B5D1.
|
|
(Skipping an image, only loading low boot image)
|
|
|
|
Low boot board detected, skipping high boot image.
|
|
Erasing, programming and verifying will start in 20
|
|
seconds
|
|
Press P to start immediately or ESC to cancel
|
|
Press Space or Enter for more options.
|
|
..............
|
|
|
|
Erasing
|
|
Programming
|
|
FLASH programmed successfully!
|
|
Press R to induce a hard reset
|
|
|
|
MPC8xx PlanetCore Boot Loader v2.00
|
|
Copyright 2001 Embedded Planet. All rights reserved.
|
|
DRAM available size = 64 MB
|
|
wvCV
|
|
DRAM OK
|
|
>
|
|
|
|
2. From PlanetCore to U-Boot
|
|
|
|
Utilities : PlanetCore FLASH Burner - PCB200.mot
|
|
|
|
Use Flash Burner to finish the work:
|
|
|
|
First, TFTP the U-Boot image file to RAM; For example,
|
|
RPXlite_DW.bin to 0x400000
|
|
Second, TFTP FLASH Burner to RAM; For example,
|
|
0x100000
|
|
Third, run the FLASH Burner and Program the U-Boot
|
|
image into the correct location in FLASH.
|
|
|
|
[Target Operation]
|
|
MPC8xx PlanetCore Boot Loader v2.00
|
|
Copyright 2001 Embedded Planet. All rights reserved.
|
|
DRAM available size = 64 MB
|
|
wvCV
|
|
DRAM OK
|
|
>t
|
|
Load using tftp via Ethernet
|
|
Enter server IP address <172.16.115.6> :
|
|
Enter server filename <PCL200.mot> : RPXlite_DW.bin
|
|
Enter (B)inary or (S)record input mode <S> : B
|
|
Enter address offset : <00400000 hex> :
|
|
|
|
Total bytes = 120096 in 232184 uSecs
|
|
Loaded addresses 00400000 through 0041D51F.
|
|
Start address = 00400000
|
|
>t
|
|
Load using tftp via Ethernet
|
|
Enter server IP address <172.16.115.6> :
|
|
Enter server filename <RPXlite_DW.bin> : PCB200.mot
|
|
Enter (B)inary or (S)record input mode <B> : S
|
|
Enter address offset : <00000000 hex> :
|
|
.512.1024..2048....4096.....
|
|
Total bytes = 326280 in 2570249 uSecs
|
|
Loaded addresses 00100000 through 0011BB51.
|
|
Start address = 00100000
|
|
>go
|
|
[Go 00100000]
|
|
|
|
MPC8xx PlanetCore Flash Burner v2.00
|
|
Copyright 2001 Embedded Planet. All rights reserved.
|
|
|
|
Construct Flash Device.....done.
|
|
|
|
Bad start address
|
|
Start = 0xFFFFFFFF, target = 0xFFFFFFFF, length =
|
|
0xFFFFFFFF
|
|
Forcing Menu Interface
|
|
|
|
h[elp] Show commands.
|
|
c[ode] Show information on code to be loaded.
|
|
di[splay] Display all flash sections.
|
|
du[mp] Dump memory. d ? for more info.
|
|
e[rase] Erase flash sections.
|
|
f[ill] Fill flash sections.
|
|
im[age] Toggle load high, low, or both flash
|
|
images.
|
|
in[fo] Show flash information.
|
|
ma[p] Show memory map.
|
|
mo[dify] Modify memory. m ? for more info.
|
|
p[rogram] Erase, program, and verify now.
|
|
reset Restart the loader.
|
|
s[how] Show flash sections to erase and program.
|
|
t[est] Test flash sections.
|
|
q[uit] Quit without programming.
|
|
#program 400000 ff000000 1D51F
|
|
doProgram( 400000 ff000000 1D51F )
|
|
|
|
Start = 0x00400000, target = 0xFF000000, length =
|
|
0x0001D51F
|
|
Erasing sector 0xFF000000, length 0x008000.
|
|
Erasing sector 0xFF008000, length 0x008000.
|
|
Erasing sector 0xFF010000, length 0x008000.
|
|
Erasing sector 0xFF018000, length 0x008000.
|
|
Programming FF000000 through FF01D51E
|
|
FLASH programmed successfully!
|
|
Press R to induce a hard reset
|
|
|
|
Forcing Hard Reset by MachineCheck and
|
|
ResetOnCheckstop...
|
|
|
|
U-Boot 1.1.2 (Aug 29 2004 - 15:11:27)
|
|
|
|
CPU: PPC823EZTnnB2 at 48 MHz: 16 kB I-Cache 8 kB
|
|
D-Cache
|
|
Board: RPXlite_DW
|
|
DRAM: 64 MB
|
|
FLASH: 16 MB
|
|
*** Warning - bad CRC, using default environment
|
|
|
|
In: serial
|
|
Out: serial
|
|
Err: serial
|
|
Net: SCC ETHERNET
|
|
u-boot>
|
|
|
|
-------------------------------------------------
|
|
|
|
Well, sometimes network function of PlanetCore couldn't work when
|
|
switching from U-Boot to PlanetCore. For example, you couldn't
|
|
download a file from HOST PC via TFTP. Don't worry, just restart your
|
|
HOST PC and everything would work as smooth as clockwork. I don't
|
|
know the reason WHY:-)
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
Merry Christmas and Happy New Year!
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
=====
|
|
Best regards,
|
|
|
|
Sam
|