Lukasz Majewski a05eb8b14a arm: xea: dts: Add 'fec-3v3' regulator properties to prevent accidental disablement
The 'enable-active-high' DTS property configures GPIO so it is active with
HIGH state (by default it is low).

The 'regulator-boot-on' property indicates that the regulator was enabled
in the 'earlier' stage - i.e. bootloader/firmware.
In the XEA case the 'fec-3v3' was configured (as a "wrapper" on GPIO0_0) in
very early SPL code, so it shouldn't be modified at latter stages.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-02-09 14:59:16 +01:00
..
2018-09-10 20:48:18 -04:00
2018-09-10 20:48:18 -04:00
2018-09-10 20:48:18 -04:00
2018-09-10 20:48:18 -04:00
2018-09-10 20:48:18 -04:00
2018-09-10 20:48:18 -04:00
2019-10-11 10:09:16 -04:00
2020-01-23 07:29:58 -05:00
2018-08-06 11:24:45 +09:00
2019-10-08 16:35:59 +02:00
2019-10-08 16:35:59 +02:00
2019-10-08 16:33:45 +02:00
2019-10-08 16:33:45 +02:00
2019-10-08 16:33:45 +02:00
2019-10-08 16:33:45 +02:00
2019-06-11 13:41:24 -04:00
2020-01-07 10:26:56 +01:00
2020-01-07 10:26:56 +01:00
2019-04-25 19:21:00 +02:00
2019-11-05 10:27:18 +01:00
2019-11-05 10:27:18 +01:00
2020-01-08 13:20:09 +01:00
2019-11-03 17:04:16 +01:00
2020-01-07 10:26:56 +01:00
2019-02-19 16:58:23 -05:00
2019-11-17 17:23:20 +08:00
2019-11-17 17:23:20 +08:00
2018-07-09 15:25:35 -04:00
2019-10-24 13:01:57 +03:00
2019-04-17 14:34:45 +05:30
2018-09-10 20:48:18 -04:00
2019-07-29 00:09:19 +02:00