mirror of
https://github.com/smaeul/u-boot.git
synced 2025-10-27 01:58:19 +00:00
54a08c4139
This syncs drivers/ddr/marvell/a38x/ with the master branch of repository
https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
up to the commit "mv_ddr: a3700: Use the right size for memset to not overflow"
d5acc10c287e40cc2feeb28710b92e45c93c702c
This patch was created by following steps:
1. Replace all a38x files in U-Boot tree by files from upstream github
Marvell mv-ddr-marvell repository.
2. Run following command to omit portions not relevant for a38x, ddr3, and ddr4:
files=drivers/ddr/marvell/a38x/*
unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_APN806 \
-UCONFIG_MC_STATIC -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \
-UCONFIG_PHY_STATIC_PRINT -UCONFIG_CUSTOMER_BOARD_SUPPORT \
-UCONFIG_A3700 -UA3900 -UA80X0 -UA70X0 -DCONFIG_ARMADA_38X -UCONFIG_ARMADA_39X \
-UCONFIG_64BIT $files
3. Manually change license to SPDX-License-Identifier
(upstream license in upstream github repository contains long license
texts and U-Boot is using just SPDX-License-Identifier.
After applying this patch, a38x, ddr3, and ddr4 code in upstream Marvell github
repository and in U-Boot would be fully identical. So in future applying
above steps could be used to sync code again.
The only change in this patch are:
1. Some fixes with include files.
2. Some function return and basic type defines changes in
mv_ddr_plat.c (to correct Marvell bug).
3. Remove of dead code in newly copied files (as a result of the
filter script stripping out everything other than a38x, dd3, and ddr4).
Reference:
"ddr: marvell: a38x: Sync code with Marvell mv-ddr-marvell repository"
107c3391b9
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
33 lines
745 B
C
33 lines
745 B
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (C) Marvell International Ltd. and its affiliates
|
|
*/
|
|
|
|
#ifndef _MV_DDR4_TRAINING_H
|
|
#define _MV_DDR4_TRAINING_H
|
|
|
|
#include "ddr3_training_ip.h"
|
|
|
|
/* configure DDR4 SDRAM */
|
|
int mv_ddr4_sdram_config(u32 dev_num);
|
|
|
|
/* configure phy */
|
|
int mv_ddr4_phy_config(u32 dev_num);
|
|
|
|
/*
|
|
* configure sstl for manual calibration and pod for automatic one
|
|
* assumes subphy configured to pod ealier
|
|
*/
|
|
int mv_ddr4_calibration_adjust(u32 dev_num, u8 vref_en, u8 pod_only);
|
|
|
|
/*
|
|
* validates calibration values
|
|
* soc dependent; TODO: check it
|
|
*/
|
|
int mv_ddr4_calibration_validate(u32 dev_num);
|
|
|
|
u16 mv_ddr4_rtt_nom_to_odt(u16 rtt_nom);
|
|
u16 mv_ddr4_rtt_wr_to_odt(u16 rtt_wr);
|
|
|
|
#endif /* _MV_DDR4_TRAINING_H */
|