mirror of
				https://github.com/smaeul/u-boot.git
				synced 2025-10-31 12:08:19 +00:00 
			
		
		
		
	iMX91 is reduced part from iMX93 with part number: i.MX9131/11/01 It removed A55_1, M33, MIPI DSI, LVDS, etc. i.MX9131: - Support 2.4GT/s DDR and HWFFC at 1.2GT/s i.MX9121: - A55 at 800Mhz and DDR at 1600MTS, with low drive mode. i.MX9111: - Support 1.6GT/s DDR and HWFFC at 800MT/s i.MX9101: - Support 800Mhz ARM clock - Support 1.6GT/s DDR and HWFFC at 800MT/s - No parallel display, eQOS, flexcan Updated Clock/Container/CPU and etc for i.MX91 Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
		
			
				
	
	
		
			1060 lines
		
	
	
		
			24 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1060 lines
		
	
	
		
			24 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0+
 | |
| /*
 | |
|  * Copyright 2022 NXP
 | |
|  *
 | |
|  * Peng Fan <peng.fan@nxp.com>
 | |
|  */
 | |
| 
 | |
| #include <config.h>
 | |
| #include <cpu_func.h>
 | |
| #include <init.h>
 | |
| #include <log.h>
 | |
| #include <asm/arch/imx-regs.h>
 | |
| #include <asm/global_data.h>
 | |
| #include <asm/io.h>
 | |
| #include <asm/arch/clock.h>
 | |
| #include <asm/arch/ccm_regs.h>
 | |
| #include <asm/arch/sys_proto.h>
 | |
| #include <asm/arch/trdc.h>
 | |
| #include <asm/mach-imx/boot_mode.h>
 | |
| #include <asm/mach-imx/syscounter.h>
 | |
| #include <asm/armv8/mmu.h>
 | |
| #include <dm/device.h>
 | |
| #include <dm/device_compat.h>
 | |
| #include <dm/uclass.h>
 | |
| #include <env.h>
 | |
| #include <env_internal.h>
 | |
| #include <errno.h>
 | |
| #include <fdt_support.h>
 | |
| #include <imx_thermal.h>
 | |
| #include <linux/bitops.h>
 | |
| #include <linux/bitfield.h>
 | |
| #include <linux/delay.h>
 | |
| #include <thermal.h>
 | |
| #include <asm/setup.h>
 | |
| #include <asm/bootm.h>
 | |
| #include <asm/arch-imx/cpu.h>
 | |
| #include <asm/mach-imx/ele_api.h>
 | |
| #include <fuse.h>
 | |
| #include <asm/arch/ddr.h>
 | |
| 
 | |
| DECLARE_GLOBAL_DATA_PTR;
 | |
| 
 | |
| struct rom_api *g_rom_api = (struct rom_api *)0x1980;
 | |
| 
 | |
| #if CONFIG_IS_ENABLED(ENV_IS_IN_MMC) || CONFIG_IS_ENABLED(ENV_IS_NOWHERE)
 | |
| __weak int board_mmc_get_env_dev(int devno)
 | |
| {
 | |
| 	return devno;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_SYS_MMC_ENV_DEV
 | |
| #define IMX9_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_DEV
 | |
| #else
 | |
| #define IMX9_MMC_ENV_DEV 0
 | |
| #endif
 | |
| 
 | |
| int mmc_get_env_dev(void)
 | |
| {
 | |
| 	int ret;
 | |
| 	u32 boot;
 | |
| 	u16 boot_type;
 | |
| 	u8 boot_instance;
 | |
| 
 | |
| 	ret = rom_api_query_boot_infor(QUERY_BT_DEV, &boot);
 | |
| 
 | |
| 	if (ret != ROM_API_OKAY) {
 | |
| 		puts("ROMAPI: failure at query_boot_info\n");
 | |
| 		return IMX9_MMC_ENV_DEV;
 | |
| 	}
 | |
| 
 | |
| 	boot_type = boot >> 16;
 | |
| 	boot_instance = (boot >> 8) & 0xff;
 | |
| 
 | |
| 	debug("boot_type %d, instance %d\n", boot_type, boot_instance);
 | |
| 
 | |
| 	/* If not boot from sd/mmc, use default value */
 | |
| 	if (boot_type != BOOT_TYPE_SD && boot_type != BOOT_TYPE_MMC)
 | |
| 		return env_get_ulong("mmcdev", 10, IMX9_MMC_ENV_DEV);
 | |
| 
 | |
| 	return board_mmc_get_env_dev(boot_instance);
 | |
| }
 | |
| #endif
 | |
| 
 | |
| /*
 | |
|  * SPEED_GRADE[5:4]    SPEED_GRADE[3:0]    MHz
 | |
|  * xx                  0000                2300
 | |
|  * xx                  0001                2200
 | |
|  * xx                  0010                2100
 | |
|  * xx                  0011                2000
 | |
|  * xx                  0100                1900
 | |
|  * xx                  0101                1800
 | |
|  * xx                  0110                1700
 | |
|  * xx                  0111                1600
 | |
|  * xx                  1000                1500
 | |
|  * xx                  1001                1400
 | |
|  * xx                  1010                1300
 | |
|  * xx                  1011                1200
 | |
|  * xx                  1100                1100
 | |
|  * xx                  1101                1000
 | |
|  * xx                  1110                900
 | |
|  * xx                  1111                800
 | |
|  */
 | |
| u32 get_cpu_speed_grade_hz(void)
 | |
| {
 | |
| 	int ret;
 | |
| 	u32 bank, word, speed, max_speed;
 | |
| 	u32 val;
 | |
| 
 | |
| 	bank = HW_CFG1 / NUM_WORDS_PER_BANK;
 | |
| 	word = HW_CFG1 % NUM_WORDS_PER_BANK;
 | |
| 	ret = fuse_read(bank, word, &val);
 | |
| 	if (ret)
 | |
| 		val = 0; /* If read fuse failed, return as blank fuse */
 | |
| 
 | |
| 	val = FIELD_GET(SPEED_GRADING_MASK, val) & 0xF;
 | |
| 
 | |
| 	speed = MHZ(2300) - val * MHZ(100);
 | |
| 
 | |
| 	if (is_imx93())
 | |
| 		max_speed = MHZ(1700);
 | |
| 	else if (is_imx91())
 | |
| 		max_speed = MHZ(1400);
 | |
| 
 | |
| 	/* In case the fuse of speed grade not programmed */
 | |
| 	if (speed > max_speed)
 | |
| 		speed = max_speed;
 | |
| 
 | |
| 	return speed;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * `00` - Consumer 0C to 95C
 | |
|  * `01` - Ext. Consumer -20C to 105C
 | |
|  * `10` - Industrial -40C to 105C
 | |
|  * `11` - Automotive -40C to 125C
 | |
|  */
 | |
| u32 get_cpu_temp_grade(int *minc, int *maxc)
 | |
| {
 | |
| 	int ret;
 | |
| 	u32 bank, word, val;
 | |
| 
 | |
| 	bank = HW_CFG1 / NUM_WORDS_PER_BANK;
 | |
| 	word = HW_CFG1 % NUM_WORDS_PER_BANK;
 | |
| 	ret = fuse_read(bank, word, &val);
 | |
| 	if (ret)
 | |
| 		val = 0; /* If read fuse failed, return as blank fuse */
 | |
| 
 | |
| 	val = FIELD_GET(MARKETING_GRADING_MASK, val);
 | |
| 
 | |
| 	if (minc && maxc) {
 | |
| 		if (val == TEMP_AUTOMOTIVE) {
 | |
| 			*minc = -40;
 | |
| 			*maxc = 125;
 | |
| 		} else if (val == TEMP_INDUSTRIAL) {
 | |
| 			*minc = -40;
 | |
| 			*maxc = 105;
 | |
| 		} else if (val == TEMP_EXTCOMMERCIAL) {
 | |
| 			if (is_imx93()) {
 | |
| 				/* imx93 only has extended industrial*/
 | |
| 				*minc = -40;
 | |
| 				*maxc = 125;
 | |
| 			} else {
 | |
| 				*minc = -20;
 | |
| 				*maxc = 105;
 | |
| 			}
 | |
| 		} else {
 | |
| 			*minc = 0;
 | |
| 			*maxc = 95;
 | |
| 		}
 | |
| 	}
 | |
| 	return val;
 | |
| }
 | |
| 
 | |
| static void set_cpu_info(struct ele_get_info_data *info)
 | |
| {
 | |
| 	gd->arch.soc_rev = info->soc;
 | |
| 	gd->arch.lifecycle = info->lc;
 | |
| 	memcpy((void *)&gd->arch.uid, &info->uid, 4 * sizeof(u32));
 | |
| }
 | |
| 
 | |
| static u32 get_cpu_variant_type(u32 type)
 | |
| {
 | |
| 	u32 bank, word, val, val2;
 | |
| 	int ret;
 | |
| 
 | |
| 	bank = HW_CFG1 / NUM_WORDS_PER_BANK;
 | |
| 	word = HW_CFG1 % NUM_WORDS_PER_BANK;
 | |
| 	ret = fuse_read(bank, word, &val);
 | |
| 	if (ret)
 | |
| 		val = 0; /* If read fuse failed, return as blank fuse */
 | |
| 
 | |
| 	bank = HW_CFG2 / NUM_WORDS_PER_BANK;
 | |
| 	word = HW_CFG2 % NUM_WORDS_PER_BANK;
 | |
| 	ret = fuse_read(bank, word, &val2);
 | |
| 	if (ret)
 | |
| 		val2 = 0; /* If read fuse failed, return as blank fuse */
 | |
| 
 | |
| 	bool npu_disable = !!(val & BIT(13));
 | |
| 	bool core1_disable = !!(val & BIT(15));
 | |
| 	u32 pack_9x9_fused = BIT(4) | BIT(5) | BIT(17) | BIT(19) | BIT(24);
 | |
| 	u32 nxp_recog = (val & GENMASK(23, 16)) >> 16;
 | |
| 
 | |
| 	/* For iMX91 */
 | |
| 	if (type == MXC_CPU_IMX91) {
 | |
| 		switch (nxp_recog) {
 | |
| 		case 0x9:
 | |
| 		case 0xA:
 | |
| 			type = MXC_CPU_IMX9111;
 | |
| 			break;
 | |
| 		case 0xD:
 | |
| 		case 0xE:
 | |
| 			type = MXC_CPU_IMX9121;
 | |
| 			break;
 | |
| 		case 0xF:
 | |
| 		case 0x10:
 | |
| 			type = MXC_CPU_IMX9101;
 | |
| 			break;
 | |
| 		default:
 | |
| 			break;	/* 9131 as default */
 | |
| 		}
 | |
| 
 | |
| 		return type;
 | |
| 	}
 | |
| 
 | |
| 	/* Low performance 93 part */
 | |
| 	if (((val >> 6) & 0x3F) == 0xE && npu_disable)
 | |
| 		return core1_disable ? MXC_CPU_IMX9301 : MXC_CPU_IMX9302;
 | |
| 
 | |
| 	if ((val2 & pack_9x9_fused) == pack_9x9_fused)
 | |
| 		type = MXC_CPU_IMX9322;
 | |
| 
 | |
| 	if (npu_disable && core1_disable)
 | |
| 		return type + 3;
 | |
| 	else if (npu_disable)
 | |
| 		return type + 2;
 | |
| 	else if (core1_disable)
 | |
| 		return type + 1;
 | |
| 
 | |
| 	return type;
 | |
| }
 | |
| 
 | |
| u32 get_cpu_rev(void)
 | |
| {
 | |
| 	u32 rev = (gd->arch.soc_rev >> 24) - 0xa0;
 | |
| 	u32 type;
 | |
| 
 | |
| 	if ((gd->arch.soc_rev & 0xFFFF) == 0x9300)
 | |
| 		type = MXC_CPU_IMX93;
 | |
| 	else
 | |
| 		type = MXC_CPU_IMX91;
 | |
| 
 | |
| 	return (get_cpu_variant_type(type) << 12) |
 | |
| 		(CHIP_REV_1_0 + rev);
 | |
| }
 | |
| 
 | |
| #define UNLOCK_WORD 0xD928C520 /* unlock word */
 | |
| #define REFRESH_WORD 0xB480A602 /* refresh word */
 | |
| 
 | |
| static void disable_wdog(void __iomem *wdog_base)
 | |
| {
 | |
| 	u32 val_cs = readl(wdog_base + 0x00);
 | |
| 
 | |
| 	if (!(val_cs & 0x80))
 | |
| 		return;
 | |
| 
 | |
| 	/* default is 32bits cmd */
 | |
| 	writel(REFRESH_WORD, (wdog_base + 0x04)); /* Refresh the CNT */
 | |
| 
 | |
| 	if (!(val_cs & 0x800)) {
 | |
| 		writel(UNLOCK_WORD, (wdog_base + 0x04));
 | |
| 		while (!(readl(wdog_base + 0x00) & 0x800))
 | |
| 			;
 | |
| 	}
 | |
| 	writel(0x0, (wdog_base + 0x0C)); /* Set WIN to 0 */
 | |
| 	writel(0x400, (wdog_base + 0x08)); /* Set timeout to default 0x400 */
 | |
| 	writel(0x2120, (wdog_base + 0x00)); /* Disable it and set update */
 | |
| 
 | |
| 	while (!(readl(wdog_base + 0x00) & 0x400))
 | |
| 		;
 | |
| }
 | |
| 
 | |
| void init_wdog(void)
 | |
| {
 | |
| 	disable_wdog((void __iomem *)WDG3_BASE_ADDR);
 | |
| 	disable_wdog((void __iomem *)WDG4_BASE_ADDR);
 | |
| 	disable_wdog((void __iomem *)WDG5_BASE_ADDR);
 | |
| }
 | |
| 
 | |
| static struct mm_region imx93_mem_map[] = {
 | |
| 	{
 | |
| 		/* ROM */
 | |
| 		.virt = 0x0UL,
 | |
| 		.phys = 0x0UL,
 | |
| 		.size = 0x100000UL,
 | |
| 		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
 | |
| 			 PTE_BLOCK_OUTER_SHARE
 | |
| 	}, {
 | |
| 		/* TCM */
 | |
| 		.virt = 0x201c0000UL,
 | |
| 		.phys = 0x201c0000UL,
 | |
| 		.size = 0x80000UL,
 | |
| 		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 | |
| 			 PTE_BLOCK_NON_SHARE |
 | |
| 			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
 | |
| 	}, {
 | |
| 		/* OCRAM */
 | |
| 		.virt = 0x20480000UL,
 | |
| 		.phys = 0x20480000UL,
 | |
| 		.size = 0xA0000UL,
 | |
| 		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
 | |
| 			 PTE_BLOCK_OUTER_SHARE
 | |
| 	}, {
 | |
| 		/* AIPS */
 | |
| 		.virt = 0x40000000UL,
 | |
| 		.phys = 0x40000000UL,
 | |
| 		.size = 0x40000000UL,
 | |
| 		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 | |
| 			 PTE_BLOCK_NON_SHARE |
 | |
| 			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
 | |
| 	}, {
 | |
| 		/* Flexible Serial Peripheral Interface */
 | |
| 		.virt = 0x28000000UL,
 | |
| 		.phys = 0x28000000UL,
 | |
| 		.size = 0x08000000UL,
 | |
| 		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 | |
| 			 PTE_BLOCK_NON_SHARE |
 | |
| 			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
 | |
| 	}, {
 | |
| 		/* DRAM1 */
 | |
| 		.virt = 0x80000000UL,
 | |
| 		.phys = 0x80000000UL,
 | |
| 		.size = PHYS_SDRAM_SIZE,
 | |
| 		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
 | |
| 			 PTE_BLOCK_OUTER_SHARE
 | |
| 	}, {
 | |
| 		/* empty entrie to split table entry 5 if needed when TEEs are used */
 | |
| 		0,
 | |
| 	}, {
 | |
| 		/* List terminator */
 | |
| 		0,
 | |
| 	}
 | |
| };
 | |
| 
 | |
| struct mm_region *mem_map = imx93_mem_map;
 | |
| 
 | |
| static unsigned int imx9_find_dram_entry_in_mem_map(void)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(imx93_mem_map); i++)
 | |
| 		if (imx93_mem_map[i].phys == CFG_SYS_SDRAM_BASE)
 | |
| 			return i;
 | |
| 
 | |
| 	hang();	/* Entry not found, this must never happen. */
 | |
| }
 | |
| 
 | |
| void enable_caches(void)
 | |
| {
 | |
| 	/* If OPTEE runs, remove OPTEE memory from MMU table to avoid speculative prefetch
 | |
| 	 * If OPTEE does not run, still update the MMU table according to dram banks structure
 | |
| 	 * to set correct dram size from board_phys_sdram_size
 | |
| 	 */
 | |
| 	int i = 0;
 | |
| 	/*
 | |
| 	 * please make sure that entry initial value matches
 | |
| 	 * imx93_mem_map for DRAM1
 | |
| 	 */
 | |
| 	int entry = imx9_find_dram_entry_in_mem_map();
 | |
| 	u64 attrs = imx93_mem_map[entry].attrs;
 | |
| 
 | |
| 	while (i < CONFIG_NR_DRAM_BANKS &&
 | |
| 	       entry < ARRAY_SIZE(imx93_mem_map)) {
 | |
| 		if (gd->bd->bi_dram[i].start == 0)
 | |
| 			break;
 | |
| 		imx93_mem_map[entry].phys = gd->bd->bi_dram[i].start;
 | |
| 		imx93_mem_map[entry].virt = gd->bd->bi_dram[i].start;
 | |
| 		imx93_mem_map[entry].size = gd->bd->bi_dram[i].size;
 | |
| 		imx93_mem_map[entry].attrs = attrs;
 | |
| 		debug("Added memory mapping (%d): %llx %llx\n", entry,
 | |
| 		      imx93_mem_map[entry].phys, imx93_mem_map[entry].size);
 | |
| 		i++; entry++;
 | |
| 	}
 | |
| 
 | |
| 	icache_enable();
 | |
| 	dcache_enable();
 | |
| }
 | |
| 
 | |
| __weak int board_phys_sdram_size(phys_size_t *size)
 | |
| {
 | |
| 	phys_size_t start, end;
 | |
| 	phys_size_t val;
 | |
| 
 | |
| 	if (!size)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	val = readl(REG_DDR_CS0_BNDS);
 | |
| 	start = (val >> 16) << 24;
 | |
| 	end   = (val & 0xFFFF);
 | |
| 	end   = end ? end + 1 : 0;
 | |
| 	end   = end << 24;
 | |
| 	*size = end - start;
 | |
| 
 | |
| 	val = readl(REG_DDR_CS1_BNDS);
 | |
| 	start = (val >> 16) << 24;
 | |
| 	end   = (val & 0xFFFF);
 | |
| 	end   = end ? end + 1 : 0;
 | |
| 	end   = end << 24;
 | |
| 	*size += end - start;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int dram_init(void)
 | |
| {
 | |
| 	phys_size_t sdram_size;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = board_phys_sdram_size(&sdram_size);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* rom_pointer[1] contains the size of TEE occupies */
 | |
| 	if (!IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1])
 | |
| 		gd->ram_size = sdram_size - rom_pointer[1];
 | |
| 	else
 | |
| 		gd->ram_size = sdram_size;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int dram_init_banksize(void)
 | |
| {
 | |
| 	int bank = 0;
 | |
| 	int ret;
 | |
| 	phys_size_t sdram_size;
 | |
| 	phys_size_t sdram_b1_size, sdram_b2_size;
 | |
| 
 | |
| 	ret = board_phys_sdram_size(&sdram_size);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Bank 1 can't cross over 4GB space */
 | |
| 	if (sdram_size > 0x80000000) {
 | |
| 		sdram_b1_size = 0x80000000;
 | |
| 		sdram_b2_size = sdram_size - 0x80000000;
 | |
| 	} else {
 | |
| 		sdram_b1_size = sdram_size;
 | |
| 		sdram_b2_size = 0;
 | |
| 	}
 | |
| 
 | |
| 	gd->bd->bi_dram[bank].start = PHYS_SDRAM;
 | |
| 	if (!IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) {
 | |
| 		phys_addr_t optee_start = (phys_addr_t)rom_pointer[0];
 | |
| 		phys_size_t optee_size = (size_t)rom_pointer[1];
 | |
| 
 | |
| 		gd->bd->bi_dram[bank].size = optee_start - gd->bd->bi_dram[bank].start;
 | |
| 		if ((optee_start + optee_size) < (PHYS_SDRAM + sdram_b1_size)) {
 | |
| 			if (++bank >= CONFIG_NR_DRAM_BANKS) {
 | |
| 				puts("CONFIG_NR_DRAM_BANKS is not enough\n");
 | |
| 				return -1;
 | |
| 			}
 | |
| 
 | |
| 			gd->bd->bi_dram[bank].start = optee_start + optee_size;
 | |
| 			gd->bd->bi_dram[bank].size = PHYS_SDRAM +
 | |
| 				sdram_b1_size - gd->bd->bi_dram[bank].start;
 | |
| 		}
 | |
| 	} else {
 | |
| 		gd->bd->bi_dram[bank].size = sdram_b1_size;
 | |
| 	}
 | |
| 
 | |
| 	if (sdram_b2_size) {
 | |
| 		if (++bank >= CONFIG_NR_DRAM_BANKS) {
 | |
| 			puts("CONFIG_NR_DRAM_BANKS is not enough for SDRAM_2\n");
 | |
| 			return -1;
 | |
| 		}
 | |
| 		gd->bd->bi_dram[bank].start = 0x100000000UL;
 | |
| 		gd->bd->bi_dram[bank].size = sdram_b2_size;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| phys_size_t get_effective_memsize(void)
 | |
| {
 | |
| 	int ret;
 | |
| 	phys_size_t sdram_size;
 | |
| 	phys_size_t sdram_b1_size;
 | |
| 
 | |
| 	ret = board_phys_sdram_size(&sdram_size);
 | |
| 	if (!ret) {
 | |
| 		/* Bank 1 can't cross over 4GB space */
 | |
| 		if (sdram_size > 0x80000000)
 | |
| 			sdram_b1_size = 0x80000000;
 | |
| 		else
 | |
| 			sdram_b1_size = sdram_size;
 | |
| 
 | |
| 		if (!IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) {
 | |
| 			/* We will relocate u-boot to top of dram1. TEE position has two cases:
 | |
| 			 * 1. At the top of dram1,  Then return the size removed optee size.
 | |
| 			 * 2. In the middle of dram1, return the size of dram1.
 | |
| 			 */
 | |
| 			if ((rom_pointer[0] + rom_pointer[1]) == (PHYS_SDRAM + sdram_b1_size))
 | |
| 				return ((phys_addr_t)rom_pointer[0] - PHYS_SDRAM);
 | |
| 		}
 | |
| 
 | |
| 		return sdram_b1_size;
 | |
| 	} else {
 | |
| 		return PHYS_SDRAM_SIZE;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
 | |
| {
 | |
| 	u32 val[2] = {};
 | |
| 	int ret;
 | |
| 
 | |
| 	if (dev_id == 0) {
 | |
| 		ret = fuse_read(39, 3, &val[0]);
 | |
| 		if (ret)
 | |
| 			goto err;
 | |
| 
 | |
| 		ret = fuse_read(39, 4, &val[1]);
 | |
| 		if (ret)
 | |
| 			goto err;
 | |
| 
 | |
| 		mac[0] = val[1] >> 8;
 | |
| 		mac[1] = val[1];
 | |
| 		mac[2] = val[0] >> 24;
 | |
| 		mac[3] = val[0] >> 16;
 | |
| 		mac[4] = val[0] >> 8;
 | |
| 		mac[5] = val[0];
 | |
| 
 | |
| 	} else {
 | |
| 		ret = fuse_read(39, 5, &val[0]);
 | |
| 		if (ret)
 | |
| 			goto err;
 | |
| 
 | |
| 		ret = fuse_read(39, 4, &val[1]);
 | |
| 		if (ret)
 | |
| 			goto err;
 | |
| 
 | |
| 		if (is_imx93() && is_soc_rev(CHIP_REV_1_0)) {
 | |
| 			mac[0] = val[1] >> 24;
 | |
| 			mac[1] = val[1] >> 16;
 | |
| 			mac[2] = val[0] >> 24;
 | |
| 			mac[3] = val[0] >> 16;
 | |
| 			mac[4] = val[0] >> 8;
 | |
| 			mac[5] = val[0];
 | |
| 		} else {
 | |
| 			mac[0] = val[0] >> 24;
 | |
| 			mac[1] = val[0] >> 16;
 | |
| 			mac[2] = val[0] >> 8;
 | |
| 			mac[3] = val[0];
 | |
| 			mac[4] = val[1] >> 24;
 | |
| 			mac[5] = val[1] >> 16;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	debug("%s: MAC%d: %02x.%02x.%02x.%02x.%02x.%02x\n",
 | |
| 	      __func__, dev_id, mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
 | |
| 	return;
 | |
| err:
 | |
| 	memset(mac, 0, 6);
 | |
| 	printf("%s: fuse read err: %d\n", __func__, ret);
 | |
| }
 | |
| 
 | |
| int print_cpuinfo(void)
 | |
| {
 | |
| 	u32 cpurev;
 | |
| 
 | |
| 	cpurev = get_cpu_rev();
 | |
| 
 | |
| 	printf("CPU:   i.MX%s rev%d.%d\n", is_imx93() ? "93" : "91",
 | |
| 	       (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| void build_info(void)
 | |
| {
 | |
| 	u32 fw_version, sha1, res, status;
 | |
| 	int ret;
 | |
| 
 | |
| 	printf("\nBuildInfo:\n");
 | |
| 
 | |
| 	ret = ele_get_fw_status(&status, &res);
 | |
| 	if (ret) {
 | |
| 		printf("  - ELE firmware status failed %d, 0x%x\n", ret, res);
 | |
| 	} else if ((status & 0xff) == 1) {
 | |
| 		ret = ele_get_fw_version(&fw_version, &sha1, &res);
 | |
| 		if (ret) {
 | |
| 			printf("  - ELE firmware version failed %d, 0x%x\n", ret, res);
 | |
| 		} else {
 | |
| 			printf("  - ELE firmware version %u.%u.%u-%x",
 | |
| 			       (fw_version & (0x00ff0000)) >> 16,
 | |
| 			       (fw_version & (0x0000fff0)) >> 4,
 | |
| 			       (fw_version & (0x0000000f)), sha1);
 | |
| 			((fw_version & (0x80000000)) >> 31) == 1 ? puts("-dirty\n") : puts("\n");
 | |
| 		}
 | |
| 	} else {
 | |
| 		printf("  - ELE firmware not included\n");
 | |
| 	}
 | |
| 	puts("\n");
 | |
| }
 | |
| 
 | |
| int arch_misc_init(void)
 | |
| {
 | |
| 	build_info();
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| struct low_drive_freq_entry {
 | |
| 	const char *node_path;
 | |
| 	u32 clk;
 | |
| 	u32 new_rate;
 | |
| };
 | |
| 
 | |
| static int low_drive_fdt_fix_clock(void *fdt, int node_off, u32 clk_index, u32 new_rate)
 | |
| {
 | |
| #define MAX_ASSIGNED_CLKS 8
 | |
| 	int cnt, j;
 | |
| 	u32 assignedclks[MAX_ASSIGNED_CLKS]; /* max 8 clocks*/
 | |
| 
 | |
| 	cnt = fdtdec_get_int_array_count(fdt, node_off, "assigned-clock-rates",
 | |
| 					 assignedclks, MAX_ASSIGNED_CLKS);
 | |
| 	if (cnt > 0) {
 | |
| 		if (cnt <= clk_index)
 | |
| 			return -ENOENT;
 | |
| 
 | |
| 		if (assignedclks[clk_index] <= new_rate)
 | |
| 			return 0;
 | |
| 
 | |
| 		assignedclks[clk_index] = new_rate;
 | |
| 		for (j = 0; j < cnt; j++)
 | |
| 			assignedclks[j] = cpu_to_fdt32(assignedclks[j]);
 | |
| 
 | |
| 		return fdt_setprop(fdt, node_off, "assigned-clock-rates", &assignedclks,
 | |
| 				   cnt * sizeof(u32));
 | |
| 	}
 | |
| 
 | |
| 	return -ENOENT;
 | |
| }
 | |
| 
 | |
| static int low_drive_freq_update(void *blob)
 | |
| {
 | |
| 	int nodeoff, ret;
 | |
| 	int i;
 | |
| 
 | |
| 	/* Update kernel dtb clocks for low drive mode */
 | |
| 	struct low_drive_freq_entry table[] = {
 | |
| 		{"/soc@0/bus@42800000/mmc@42850000", 0, 266666667},
 | |
| 		{"/soc@0/bus@42800000/mmc@42860000", 0, 266666667},
 | |
| 		{"/soc@0/bus@42800000/mmc@428b0000", 0, 266666667},
 | |
| 	};
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(table); i++) {
 | |
| 		nodeoff = fdt_path_offset(blob, table[i].node_path);
 | |
| 		if (nodeoff >= 0) {
 | |
| 			ret = low_drive_fdt_fix_clock(blob, nodeoff, table[i].clk,
 | |
| 						      table[i].new_rate);
 | |
| 			if (!ret)
 | |
| 				printf("%s freq updated\n", table[i].node_path);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #if defined(CONFIG_OF_BOARD_FIXUP) && !defined(CONFIG_TARGET_PHYCORE_IMX93)
 | |
| #ifndef CONFIG_XPL_BUILD
 | |
| int board_fix_fdt(void *fdt)
 | |
| {
 | |
| 	/* Update dtb clocks for low drive mode */
 | |
| 	if (is_voltage_mode(VOLT_LOW_DRIVE)) {
 | |
| 		int nodeoff;
 | |
| 		int i;
 | |
| 
 | |
| 		struct low_drive_freq_entry table[] = {
 | |
| 			{"/soc@0/bus@42800000/mmc@42850000", 0, 266666667},
 | |
| 			{"/soc@0/bus@42800000/mmc@42860000", 0, 266666667},
 | |
| 			{"/soc@0/bus@42800000/mmc@428b0000", 0, 266666667},
 | |
| 		};
 | |
| 
 | |
| 		for (i = 0; i < ARRAY_SIZE(table); i++) {
 | |
| 			nodeoff = fdt_path_offset(fdt, table[i].node_path);
 | |
| 			if (nodeoff >= 0)
 | |
| 				low_drive_fdt_fix_clock(fdt, nodeoff, table[i].clk,
 | |
| 							table[i].new_rate);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 | |
| #endif
 | |
| 
 | |
| int ft_system_setup(void *blob, struct bd_info *bd)
 | |
| {
 | |
| 	static const char * const nodes_path[] = {
 | |
| 		"/cpus/cpu@0",
 | |
| 		"/cpus/cpu@100",
 | |
| 	};
 | |
| 
 | |
| 	if (fixup_thermal_trips(blob, "cpu-thermal"))
 | |
| 		printf("Failed to update cpu-thermal trip(s)");
 | |
| 
 | |
| 	if (is_imx9351() || is_imx9331() || is_imx9321() || is_imx9311() || is_imx9301())
 | |
| 		disable_cpu_nodes(blob, nodes_path, 1, 2);
 | |
| 
 | |
| 	if (is_voltage_mode(VOLT_LOW_DRIVE))
 | |
| 		low_drive_freq_update(blob);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #if defined(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)
 | |
| void get_board_serial(struct tag_serialnr *serialnr)
 | |
| {
 | |
| 	printf("UID: %08x%08x%08x%08x\n", __be32_to_cpu(gd->arch.uid[0]),
 | |
| 	       __be32_to_cpu(gd->arch.uid[1]), __be32_to_cpu(gd->arch.uid[2]),
 | |
| 	       __be32_to_cpu(gd->arch.uid[3]));
 | |
| 
 | |
| 	serialnr->low = __be32_to_cpu(gd->arch.uid[1]);
 | |
| 	serialnr->high = __be32_to_cpu(gd->arch.uid[0]);
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static void save_reset_cause(void)
 | |
| {
 | |
| 	struct src_general_regs *src = (struct src_general_regs *)SRC_GLOBAL_RBASE;
 | |
| 	u32 srsr = readl(&src->srsr);
 | |
| 
 | |
| 	/* clear srsr in sec mode */
 | |
| 	writel(srsr, &src->srsr);
 | |
| 
 | |
| 	/* Save value to GPR1 to pass to nonsecure */
 | |
| 	writel(srsr, &src->gpr[0]);
 | |
| }
 | |
| 
 | |
| int arch_cpu_init(void)
 | |
| {
 | |
| 	if (IS_ENABLED(CONFIG_XPL_BUILD)) {
 | |
| 		/* Disable wdog */
 | |
| 		init_wdog();
 | |
| 
 | |
| 		clock_init_early();
 | |
| 
 | |
| 		trdc_early_init();
 | |
| 
 | |
| 		/* Save SRC SRSR to GPR1 and clear it */
 | |
| 		save_reset_cause();
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int imx9_probe_mu(void)
 | |
| {
 | |
| 	struct udevice *devp;
 | |
| 	int node, ret;
 | |
| 	u32 res;
 | |
| 	struct ele_get_info_data info;
 | |
| 
 | |
| 	node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "fsl,imx93-mu-s4");
 | |
| 
 | |
| 	ret = uclass_get_device_by_of_offset(UCLASS_MISC, node, &devp);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	if (gd->flags & GD_FLG_RELOC)
 | |
| 		return 0;
 | |
| 
 | |
| 	ret = ele_get_info(&info, &res);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	set_cpu_info(&info);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| EVENT_SPY_SIMPLE(EVT_DM_POST_INIT_F, imx9_probe_mu);
 | |
| EVENT_SPY_SIMPLE(EVT_DM_POST_INIT_R, imx9_probe_mu);
 | |
| 
 | |
| int timer_init(void)
 | |
| {
 | |
| #ifdef CONFIG_XPL_BUILD
 | |
| 	struct sctr_regs *sctr = (struct sctr_regs *)SYSCNT_CTRL_BASE_ADDR;
 | |
| 	unsigned long freq = readl(&sctr->cntfid0);
 | |
| 
 | |
| 	/* Update with accurate clock frequency */
 | |
| 	asm volatile("msr cntfrq_el0, %0" : : "r" (freq) : "memory");
 | |
| 
 | |
| 	clrsetbits_le32(&sctr->cntcr, SC_CNTCR_FREQ0 | SC_CNTCR_FREQ1,
 | |
| 			SC_CNTCR_FREQ0 | SC_CNTCR_ENABLE | SC_CNTCR_HDBG);
 | |
| #endif
 | |
| 
 | |
| 	gd->arch.tbl = 0;
 | |
| 	gd->arch.tbu = 0;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| enum env_location env_get_location(enum env_operation op, int prio)
 | |
| {
 | |
| 	enum boot_device dev = get_boot_device();
 | |
| 
 | |
| 	if (prio)
 | |
| 		return ENVL_UNKNOWN;
 | |
| 
 | |
| 	switch (dev) {
 | |
| 	case QSPI_BOOT:
 | |
| 		if (CONFIG_IS_ENABLED(ENV_IS_IN_SPI_FLASH))
 | |
| 			return ENVL_SPI_FLASH;
 | |
| 		return ENVL_NOWHERE;
 | |
| 	case SD1_BOOT:
 | |
| 	case SD2_BOOT:
 | |
| 	case SD3_BOOT:
 | |
| 	case MMC1_BOOT:
 | |
| 	case MMC2_BOOT:
 | |
| 	case MMC3_BOOT:
 | |
| 		if (CONFIG_IS_ENABLED(ENV_IS_IN_MMC))
 | |
| 			return ENVL_MMC;
 | |
| 		else if (CONFIG_IS_ENABLED(ENV_IS_IN_EXT4))
 | |
| 			return ENVL_EXT4;
 | |
| 		else if (CONFIG_IS_ENABLED(ENV_IS_IN_FAT))
 | |
| 			return ENVL_FAT;
 | |
| 		return ENVL_NOWHERE;
 | |
| 	default:
 | |
| 		return ENVL_NOWHERE;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int mix_power_init(enum mix_power_domain pd)
 | |
| {
 | |
| 	enum src_mix_slice_id mix_id;
 | |
| 	enum src_mem_slice_id mem_id;
 | |
| 	struct src_mix_slice_regs *mix_regs;
 | |
| 	struct src_mem_slice_regs *mem_regs;
 | |
| 	struct src_general_regs *global_regs;
 | |
| 	u32 scr, val;
 | |
| 
 | |
| 	switch (pd) {
 | |
| 	case MIX_PD_MEDIAMIX:
 | |
| 		mix_id = SRC_MIX_MEDIA;
 | |
| 		mem_id = SRC_MEM_MEDIA;
 | |
| 		scr = BIT(5);
 | |
| 
 | |
| 		/* Enable ELE handshake */
 | |
| 		struct blk_ctrl_s_aonmix_regs *s_regs =
 | |
| 			(struct blk_ctrl_s_aonmix_regs *)BLK_CTRL_S_ANOMIX_BASE_ADDR;
 | |
| 
 | |
| 		setbits_le32(&s_regs->lp_handshake[0], BIT(13));
 | |
| 		break;
 | |
| 	case MIX_PD_MLMIX:
 | |
| 		mix_id = SRC_MIX_ML;
 | |
| 		mem_id = SRC_MEM_ML;
 | |
| 		scr = BIT(4);
 | |
| 		break;
 | |
| 	case MIX_PD_DDRMIX:
 | |
| 		mix_id = SRC_MIX_DDRMIX;
 | |
| 		mem_id = SRC_MEM_DDRMIX;
 | |
| 		scr = BIT(6);
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	mix_regs = (struct src_mix_slice_regs *)(ulong)(SRC_IPS_BASE_ADDR + 0x400 * (mix_id + 1));
 | |
| 	mem_regs =
 | |
| 		(struct src_mem_slice_regs *)(ulong)(SRC_IPS_BASE_ADDR + 0x3800 + 0x400 * mem_id);
 | |
| 	global_regs = (struct src_general_regs *)(ulong)SRC_GLOBAL_RBASE;
 | |
| 
 | |
| 	/* Allow NS to set it */
 | |
| 	setbits_le32(&mix_regs->authen_ctrl, BIT(9));
 | |
| 
 | |
| 	clrsetbits_le32(&mix_regs->psw_ack_ctrl[0], BIT(28), BIT(29));
 | |
| 
 | |
| 	/* mix reset will be held until boot core write this bit to 1 */
 | |
| 	setbits_le32(&global_regs->scr, scr);
 | |
| 
 | |
| 	/* Enable mem in Low power auto sequence */
 | |
| 	setbits_le32(&mem_regs->mem_ctrl, BIT(2));
 | |
| 
 | |
| 	/* Set the power down state */
 | |
| 	val = readl(&mix_regs->func_stat);
 | |
| 	if (val & SRC_MIX_SLICE_FUNC_STAT_PSW_STAT) {
 | |
| 		/* The mix is default power off, power down it to make PDN_SFT bit
 | |
| 		 *  aligned with FUNC STAT
 | |
| 		 */
 | |
| 		setbits_le32(&mix_regs->slice_sw_ctrl, BIT(31));
 | |
| 		val = readl(&mix_regs->func_stat);
 | |
| 
 | |
| 		/* Since PSW_STAT is 1, can't be used for power off status (SW_CTRL BIT31 set)) */
 | |
| 		/* Check the MEM STAT change to ensure SSAR is completed */
 | |
| 		while (!(val & SRC_MIX_SLICE_FUNC_STAT_MEM_STAT))
 | |
| 			val = readl(&mix_regs->func_stat);
 | |
| 
 | |
| 		/* wait few ipg clock cycles to ensure FSM done and power off status is correct */
 | |
| 		/* About 5 cycles at 24Mhz, 1us is enough  */
 | |
| 		udelay(1);
 | |
| 	} else {
 | |
| 		/*  The mix is default power on, Do mix power cycle */
 | |
| 		setbits_le32(&mix_regs->slice_sw_ctrl, BIT(31));
 | |
| 		val = readl(&mix_regs->func_stat);
 | |
| 		while (!(val & SRC_MIX_SLICE_FUNC_STAT_PSW_STAT))
 | |
| 			val = readl(&mix_regs->func_stat);
 | |
| 	}
 | |
| 
 | |
| 	/* power on */
 | |
| 	clrbits_le32(&mix_regs->slice_sw_ctrl, BIT(31));
 | |
| 	val = readl(&mix_regs->func_stat);
 | |
| 	while (val & SRC_MIX_SLICE_FUNC_STAT_SSAR_STAT)
 | |
| 		val = readl(&mix_regs->func_stat);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| void disable_isolation(void)
 | |
| {
 | |
| 	struct src_general_regs *global_regs = (struct src_general_regs *)(ulong)SRC_GLOBAL_RBASE;
 | |
| 	/* clear isolation for usbphy, dsi, csi*/
 | |
| 	writel(0x0, &global_regs->sp_iso_ctrl);
 | |
| }
 | |
| 
 | |
| void soc_power_init(void)
 | |
| {
 | |
| 	mix_power_init(MIX_PD_MEDIAMIX);
 | |
| 
 | |
| 	if (is_imx93())
 | |
| 		mix_power_init(MIX_PD_MLMIX);
 | |
| 
 | |
| 	disable_isolation();
 | |
| }
 | |
| 
 | |
| bool m33_is_rom_kicked(void)
 | |
| {
 | |
| 	struct blk_ctrl_s_aonmix_regs *s_regs =
 | |
| 			(struct blk_ctrl_s_aonmix_regs *)BLK_CTRL_S_ANOMIX_BASE_ADDR;
 | |
| 
 | |
| 	if (!(readl(&s_regs->m33_cfg) & BIT(2)))
 | |
| 		return true;
 | |
| 
 | |
| 	return false;
 | |
| }
 | |
| 
 | |
| int m33_prepare(void)
 | |
| {
 | |
| 	struct src_mix_slice_regs *mix_regs =
 | |
| 		(struct src_mix_slice_regs *)(ulong)(SRC_IPS_BASE_ADDR + 0x400 * (SRC_MIX_CM33 + 1));
 | |
| 	struct src_general_regs *global_regs =
 | |
| 		(struct src_general_regs *)(ulong)SRC_GLOBAL_RBASE;
 | |
| 	struct blk_ctrl_s_aonmix_regs *s_regs =
 | |
| 			(struct blk_ctrl_s_aonmix_regs *)BLK_CTRL_S_ANOMIX_BASE_ADDR;
 | |
| 	u32 val, i;
 | |
| 
 | |
| 	if (is_imx91())
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	if (m33_is_rom_kicked())
 | |
| 		return -EPERM;
 | |
| 
 | |
| 	/* Release reset of M33 */
 | |
| 	setbits_le32(&global_regs->scr, BIT(0));
 | |
| 
 | |
| 	/* Check the reset released in M33 MIX func stat */
 | |
| 	val = readl(&mix_regs->func_stat);
 | |
| 	while (!(val & SRC_MIX_SLICE_FUNC_STAT_RST_STAT))
 | |
| 		val = readl(&mix_regs->func_stat);
 | |
| 
 | |
| 	/* Release ELE TROUT */
 | |
| 	ele_release_m33_trout();
 | |
| 
 | |
| 	/* Mask WDOG1 IRQ from A55, we use it for M33 reset */
 | |
| 	setbits_le32(&s_regs->ca55_irq_mask[1], BIT(6));
 | |
| 
 | |
| 	/* Turn on WDOG1 clock */
 | |
| 	ccm_lpcg_on(CCGR_WDG1, 1);
 | |
| 
 | |
| 	/* Set ELE LP handshake for M33 reset */
 | |
| 	setbits_le32(&s_regs->lp_handshake[0], BIT(6));
 | |
| 
 | |
| 	/* OSCCA enabled, reconfigure TRDC for TCM access, otherwise ECC init will raise error */
 | |
| 	val = readl(BLK_CTRL_NS_ANOMIX_BASE_ADDR + 0x28);
 | |
| 	if (val & BIT(0)) {
 | |
| 		trdc_mbc_set_control(0x44270000, 1, 0, 0x6600);
 | |
| 
 | |
| 		for (i = 0; i < 32; i++)
 | |
| 			trdc_mbc_blk_config(0x44270000, 1, 3, 0, i, true, 0);
 | |
| 
 | |
| 		for (i = 0; i < 32; i++)
 | |
| 			trdc_mbc_blk_config(0x44270000, 1, 3, 1, i, true, 0);
 | |
| 	}
 | |
| 
 | |
| 	/* Clear M33 TCM for ECC */
 | |
| 	memset((void *)(ulong)0x201e0000, 0, 0x40000);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int psci_sysreset_get_status(struct udevice *dev, char *buf, int size)
 | |
| {
 | |
| 	static const char *reset_cause[] = {
 | |
| 		"POR ",
 | |
| 		"JTAG ",
 | |
| 		"IPP USER ",
 | |
| 		"WDOG1 ",
 | |
| 		"WDOG2 ",
 | |
| 		"WDOG3 ",
 | |
| 		"WDOG4 ",
 | |
| 		"WDOG5 ",
 | |
| 		"TEMPSENSE ",
 | |
| 		"CSU ",
 | |
| 		"JTAG_SW ",
 | |
| 		"M33_REQ ",
 | |
| 		"M33_LOCKUP ",
 | |
| 		"UNK ",
 | |
| 		"UNK ",
 | |
| 		"UNK "
 | |
| 	};
 | |
| 
 | |
| 	struct src_general_regs *src = (struct src_general_regs *)SRC_GLOBAL_RBASE;
 | |
| 	u32 srsr;
 | |
| 	u32 i;
 | |
| 	int res;
 | |
| 
 | |
| 	srsr = readl(&src->gpr[0]);
 | |
| 
 | |
| 	for (i = ARRAY_SIZE(reset_cause); i > 0; i--) {
 | |
| 		if (srsr & (BIT(i - 1)))
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	res = snprintf(buf, size, "Reset Status: %s\n", i ? reset_cause[i - 1] : "unknown reset");
 | |
| 	if (res < 0) {
 | |
| 		dev_err(dev, "Could not write reset status message (err = %d)\n", res);
 | |
| 		return -EIO;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| enum imx9_soc_voltage_mode soc_target_voltage_mode(void)
 | |
| {
 | |
| 	u32 speed = get_cpu_speed_grade_hz();
 | |
| 	enum imx9_soc_voltage_mode voltage = VOLT_OVER_DRIVE;
 | |
| 
 | |
| 	if (is_imx93() || is_imx91()) {
 | |
| 		if (speed == 1700000000)
 | |
| 			voltage = VOLT_OVER_DRIVE;
 | |
| 		else if (speed == 1400000000)
 | |
| 			voltage = VOLT_NOMINAL_DRIVE;
 | |
| 		else if (speed == 900000000 || speed == 800000000)
 | |
| 			voltage = VOLT_LOW_DRIVE;
 | |
| 		else
 | |
| 			printf("Unexpected A55 freq %u, default to OD\n", speed);
 | |
| 	}
 | |
| 
 | |
| 	return voltage;
 | |
| }
 |