mirror of
https://github.com/smaeul/u-boot.git
synced 2025-10-30 19:48:19 +00:00
ab09e72866
Rework cache settings for imx6, move cache configuration to imx-common/cache.c so it can be reused for newer SoC Signed-off-by: Adrian Alonso <aalonso@freescale.com>
104 lines
2.8 KiB
C
104 lines
2.8 KiB
C
/*
|
|
* Copyright 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/armv7.h>
|
|
#include <asm/pl310.h>
|
|
#include <asm/io.h>
|
|
|
|
#ifndef CONFIG_SYS_DCACHE_OFF
|
|
void enable_caches(void)
|
|
{
|
|
#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
|
|
enum dcache_option option = DCACHE_WRITETHROUGH;
|
|
#else
|
|
enum dcache_option option = DCACHE_WRITEBACK;
|
|
#endif
|
|
/* Avoid random hang when download by usb */
|
|
invalidate_dcache_all();
|
|
|
|
/* Enable D-cache. I-cache is already enabled in start.S */
|
|
dcache_enable();
|
|
|
|
/* Enable caching on OCRAM and ROM */
|
|
mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR,
|
|
ROMCP_ARB_END_ADDR,
|
|
option);
|
|
mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR,
|
|
IRAM_SIZE,
|
|
option);
|
|
}
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_L2CACHE_OFF
|
|
#ifdef CONFIG_SYS_L2_PL310
|
|
#define IOMUXC_GPR11_L2CACHE_AS_OCRAM 0x00000002
|
|
void v7_outer_cache_enable(void)
|
|
{
|
|
struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
|
|
unsigned int val;
|
|
|
|
|
|
/*
|
|
* Set bit 22 in the auxiliary control register. If this bit
|
|
* is cleared, PL310 treats Normal Shared Non-cacheable
|
|
* accesses as Cacheable no-allocate.
|
|
*/
|
|
setbits_le32(&pl310->pl310_aux_ctrl, L310_SHARED_ATT_OVERRIDE_ENABLE);
|
|
|
|
#if defined CONFIG_MX6SL
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
val = readl(&iomux->gpr[11]);
|
|
if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) {
|
|
/* L2 cache configured as OCRAM, reset it */
|
|
val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM;
|
|
writel(val, &iomux->gpr[11]);
|
|
}
|
|
#endif
|
|
|
|
/* Must disable the L2 before changing the latency parameters */
|
|
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
|
|
|
|
writel(0x132, &pl310->pl310_tag_latency_ctrl);
|
|
writel(0x132, &pl310->pl310_data_latency_ctrl);
|
|
|
|
val = readl(&pl310->pl310_prefetch_ctrl);
|
|
|
|
/* Turn on the L2 I/D prefetch */
|
|
val |= 0x30000000;
|
|
|
|
/*
|
|
* The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
|
|
* The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
|
|
* But according to ARM PL310 errata: 752271
|
|
* ID: 752271: Double linefill feature can cause data corruption
|
|
* Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
|
|
* Workaround: The only workaround to this erratum is to disable the
|
|
* double linefill feature. This is the default behavior.
|
|
*/
|
|
|
|
#ifndef CONFIG_MX6Q
|
|
val |= 0x40800000;
|
|
#endif
|
|
writel(val, &pl310->pl310_prefetch_ctrl);
|
|
|
|
val = readl(&pl310->pl310_power_ctrl);
|
|
val |= L2X0_DYNAMIC_CLK_GATING_EN;
|
|
val |= L2X0_STNDBY_MODE_EN;
|
|
writel(val, &pl310->pl310_power_ctrl);
|
|
|
|
setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
|
|
}
|
|
|
|
void v7_outer_cache_disable(void)
|
|
{
|
|
struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
|
|
|
|
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
|
|
}
|
|
#endif /* !CONFIG_SYS_L2_PL310 */
|
|
#endif /* !CONFIG_SYS_L2CACHE_OFF */
|