Masahiro Yamada ed3986ca30 bitops: collect BIT macros to include/linux/bitops.h ...

Same macros are defined in various places.  Collect them into
include/linux/bitops.h like Linux.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

2017-11-29 00:28:57 +09:00

..

boot0.h

sunxi: A64: do an RMR switch if started in AArch32 mode

2017-01-04 16:37:42 +01:00

clock_sun4i.h

sunxi: Add missing macros to configure the NAND controller clk

2016-07-24 20:36:28 -05:00

clock_sun6i.h

sunxi: Add clock support for TV encoder

2017-05-15 21:22:57 +02:00

clock_sun8i_a83t.h

sunxi: clk: fix N formula for CPUX clocks

2017-10-25 10:05:05 +02:00

clock_sun9i.h

sunxi: add initial clock setup for sun9i for SPL

2016-10-30 11:38:04 +01:00

clock.h

sunxi: Add support for Allwinner A64 SoCs

2016-04-01 09:52:28 +02:00

cpu_sun4i.h

sunxi: Add base address for TV encoder

2017-06-09 15:30:28 +02:00

cpu_sun9i.h

sunxi: Add support for SID e-fuses on sun9i

2016-10-30 11:38:04 +01:00

cpu.h

sunxi: Use H3/A64 DRAM initialization code for R40

2017-04-20 13:30:01 +02:00

cpucfg.h

sunxi: Add CPUCFG debug lock and sun7i cpu power controls

2016-06-20 22:44:00 +02:00

display2.h

sunxi: video: Add support for CSC and TVE to DE2 driver

2017-06-09 15:30:47 +02:00

display.h

sunxi: video: Split out TVE code

2017-05-15 21:22:24 +02:00

dma_sun4i.h

sunxi: Add DMA definitions

2015-05-29 13:46:36 +02:00

dma.h

sunxi: Add DMA definitions

2015-05-29 13:46:36 +02:00

dram_sun4i.h

sunxi: Make DRAM_ODT_EN Kconfig setting a bool

2015-05-19 18:46:44 +02:00

dram_sun6i.h

sun6i: Add dram initialization code

2014-11-13 14:49:01 +01:00

dram_sun8i_a23.h

sunxi: Make DRAM_ODT_EN Kconfig setting a bool

2015-05-19 18:46:44 +02:00

dram_sun8i_a33.h

sunxi: Add a33 dram init code

2015-05-04 16:51:51 +02:00

dram_sun8i_a83t.h

sunxi: Add support for LPDDR3 for A83T

2016-01-26 16:20:05 +01:00

dram_sun9i.h

sunxi: DRAM initialisation for sun9i

2016-10-30 11:38:04 +01:00

dram_sunxi_dw.h

bitops: collect BIT macros to include/linux/bitops.h

2017-11-29 00:28:57 +09:00

dram.h

sunxi: makes an invisible option for H3-like DRAM controllers

2017-06-08 22:37:55 +05:30

gpio.h

sunxi: add basic V3s support

2017-04-21 09:23:17 +02:00

gtbus_sun9i.h

sunxi: add gtbus-initialisation for sun9i

2016-10-30 11:38:04 +01:00

gtbus.h

sunxi: add gtbus-initialisation for sun9i

2016-10-30 11:38:04 +01:00

i2c.h

sunxi: Add support for the I2C controller which is part of the PRCM

2016-01-21 07:30:01 +01:00

lcdc.h

sunxi: video: split out PLL configuration code

2017-10-27 09:39:19 +02:00

mmc.h

mmc: sunxi: Support new mode

2017-08-28 22:36:44 +05:30

p2wi.h

sun6i: Add new p2wi controller driver

2014-11-13 14:49:01 +01:00

pmic_bus.h

sunxi: axp: Move axp pmic register helpers to a separate file

2015-05-04 16:51:53 +02:00

prcm.h

sunxi: add PRCM secure switch register definition

2017-08-11 15:49:39 +05:30

pwm.h

sunxi: display: Use PWM to drive backlight where applicable

2016-08-26 16:58:37 +02:00

rsb.h

sunxi: rsb: Move rsb_set_device_mode() call to rsb_init()

2015-02-02 13:55:14 +01:00

spl.h

arm: sunxi: Move spl_boot_device in a separate function

2017-10-03 19:12:06 +02:00

sys_proto.h

sunxi: Fix CONFIG_SUNXI_GMAC references

2017-09-01 20:48:27 +05:30

timer.h

sunxi: Fix watchdog reset function for R40

2017-04-20 13:30:00 +02:00

tve.h

sunxi: video: Split out TVE code

2017-05-15 21:22:24 +02:00

tzpc.h

sunxi: Support Secure Memory Touch Arbiter (SMTA) in sun8i H3

2016-01-26 16:20:04 +01:00

usb_phy.h

musb: sunxi: switch to the device model

2017-10-03 19:12:05 +02:00

watchdog.h

sunxi: Fix watchdog reset function for R40

2017-04-20 13:30:00 +02:00