mirror of
https://github.com/smaeul/u-boot.git
synced 2025-11-03 21:48:15 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
196 lines
4.8 KiB
ArmAsm
196 lines
4.8 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Board specific setup info
|
|
*
|
|
* (C) Copyright 2004, ARM Ltd.
|
|
* Philippe Robin, <philippe.robin@arm.com>
|
|
*/
|
|
|
|
#include <config.h>
|
|
|
|
/* Reset using CM control register */
|
|
.global reset_cpu
|
|
reset_cpu:
|
|
mov r0, #CM_BASE
|
|
ldr r1,[r0,#OS_CTRL]
|
|
orr r1,r1,#CMMASK_RESET
|
|
str r1,[r0,#OS_CTRL]
|
|
|
|
reset_failed:
|
|
b reset_failed
|
|
|
|
/* Set up the platform, once the cpu has been initialized */
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
/* If U-Boot has been run after the ARM boot monitor
|
|
* then all the necessary actions have been done
|
|
* otherwise we are running from user flash mapped to 0x00000000
|
|
* --- DO NOT REMAP BEFORE THE CODE HAS BEEN RELOCATED --
|
|
* Changes to the (possibly soft) reset defaults of the processor
|
|
* itself should be performed in cpu/arm<>/start.S
|
|
* This function affects only the core module or board settings
|
|
*/
|
|
|
|
#ifdef CONFIG_CM_INIT
|
|
/* CM has an initialization register
|
|
* - bits in it are wired into test-chip pins to force
|
|
* reset defaults
|
|
* - may need to change its contents for U-Boot
|
|
*/
|
|
|
|
/* set the desired CM specific value */
|
|
mov r2,#CMMASK_LOWVEC /* Vectors at 0x00000000 for all */
|
|
|
|
#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
|
|
orr r2,r2,#CMMASK_INIT_102
|
|
#else
|
|
|
|
#if !defined (CONFIG_CM920T) && !defined (CONFIG_CM920T_ETM) && \
|
|
!defined (CONFIG_CM940T)
|
|
|
|
#ifdef CONFIG_CM_MULTIPLE_SSRAM
|
|
/* set simple mapping */
|
|
and r2,r2,#CMMASK_MAP_SIMPLE
|
|
#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM */
|
|
|
|
#ifdef CONFIG_CM_TCRAM
|
|
/* disable TCRAM */
|
|
and r2,r2,#CMMASK_TCRAM_DISABLE
|
|
#endif /* #ifdef CONFIG_CM_TCRAM */
|
|
|
|
#if defined (CONFIG_CM926EJ_S) || defined (CONFIG_CM1026EJ_S) || \
|
|
defined (CONFIG_CM1136JF_S)
|
|
|
|
and r2,r2,#CMMASK_LE
|
|
|
|
#endif /* cpu with little endian initialization */
|
|
|
|
orr r2,r2,#CMMASK_CMxx6_COMMON
|
|
|
|
#endif /* CMxx6 code */
|
|
|
|
#endif /* ARM102xxE value */
|
|
|
|
/* read CM_INIT */
|
|
mov r0, #CM_BASE
|
|
ldr r1, [r0, #OS_INIT]
|
|
/* check against desired bit setting */
|
|
and r3,r1,r2
|
|
cmp r3,r2
|
|
beq init_reg_OK
|
|
|
|
/* lock for change */
|
|
mov r3, #CMVAL_LOCK1
|
|
add r3,r3,#CMVAL_LOCK2
|
|
str r3, [r0, #OS_LOCK]
|
|
/* set desired value */
|
|
orr r1,r1,r2
|
|
/* write & relock CM_INIT */
|
|
str r1, [r0, #OS_INIT]
|
|
mov r1, #CMVAL_UNLOCK
|
|
str r1, [r0, #OS_LOCK]
|
|
|
|
/* soft reset so new values used */
|
|
b reset_cpu
|
|
|
|
init_reg_OK:
|
|
|
|
#endif /* CONFIG_CM_INIT */
|
|
|
|
mov pc, lr
|
|
|
|
#ifdef CONFIG_CM_SPD_DETECT
|
|
/* Fast memory is available for the DRAM data
|
|
* - ensure it has been transferred, then summarize the data
|
|
* into a CM register
|
|
*/
|
|
.globl dram_query
|
|
dram_query:
|
|
stmfd r13!,{r4-r6,lr}
|
|
/* set up SDRAM info */
|
|
/* - based on example code from the CM User Guide */
|
|
mov r0, #CM_BASE
|
|
|
|
readspdbit:
|
|
ldr r1, [r0, #OS_SDRAM] /* read the SDRAM register */
|
|
and r1, r1, #0x20 /* mask SPD bit (5) */
|
|
cmp r1, #0x20 /* test if set */
|
|
bne readspdbit
|
|
|
|
setupsdram:
|
|
add r0, r0, #OS_SPD /* address the copy of the SDP data */
|
|
ldrb r1, [r0, #3] /* number of row address lines */
|
|
ldrb r2, [r0, #4] /* number of column address lines */
|
|
ldrb r3, [r0, #5] /* number of banks */
|
|
ldrb r4, [r0, #31] /* module bank density */
|
|
mul r5, r4, r3 /* size of SDRAM (MB divided by 4) */
|
|
mov r5, r5, ASL#2 /* size in MB */
|
|
mov r0, #CM_BASE /* reload for later code */
|
|
cmp r5, #0x10 /* is it 16MB? */
|
|
bne not16
|
|
mov r6, #0x2 /* store size and CAS latency of 2 */
|
|
b writesize
|
|
|
|
not16:
|
|
cmp r5, #0x20 /* is it 32MB? */
|
|
bne not32
|
|
mov r6, #0x6
|
|
b writesize
|
|
|
|
not32:
|
|
cmp r5, #0x40 /* is it 64MB? */
|
|
bne not64
|
|
mov r6, #0xa
|
|
b writesize
|
|
|
|
not64:
|
|
cmp r5, #0x80 /* is it 128MB? */
|
|
bne not128
|
|
mov r6, #0xe
|
|
b writesize
|
|
|
|
not128:
|
|
/* if it is none of these sizes then it is either 256MB, or
|
|
* there is no SDRAM fitted so default to 256MB
|
|
*/
|
|
mov r6, #0x12
|
|
|
|
writesize:
|
|
mov r1, r1, ASL#8 /* row addr lines from SDRAM reg */
|
|
orr r2, r1, r2, ASL#12 /* OR in column address lines */
|
|
orr r3, r2, r3, ASL#16 /* OR in number of banks */
|
|
orr r6, r6, r3 /* OR in size and CAS latency */
|
|
str r6, [r0, #OS_SDRAM] /* store SDRAM parameters */
|
|
|
|
#endif /* #ifdef CONFIG_CM_SPD_DETECT */
|
|
|
|
ldmfd r13!,{r4-r6,pc} /* back to caller */
|
|
|
|
#ifdef CONFIG_CM_REMAP
|
|
/* CM remap bit is operational
|
|
* - use it to map writeable memory at 0x00000000, in place of flash
|
|
*/
|
|
.globl cm_remap
|
|
cm_remap:
|
|
stmfd r13!,{r4-r10,lr}
|
|
|
|
mov r0, #CM_BASE
|
|
ldr r1, [r0, #OS_CTRL]
|
|
orr r1, r1, #CMMASK_REMAP /* set remap and led bits */
|
|
str r1, [r0, #OS_CTRL]
|
|
|
|
/* Now 0x00000000 is writeable, replace the vectors */
|
|
ldr r0, =_start /* r0 <- start of vectors */
|
|
add r2, r0, #64 /* r2 <- past vectors */
|
|
sub r1,r1,r1 /* destination 0x00000000 */
|
|
|
|
copy_vec:
|
|
ldmia r0!, {r3-r10} /* copy from source address [r0] */
|
|
stmia r1!, {r3-r10} /* copy to target address [r1] */
|
|
cmp r0, r2 /* until source end address [r2] */
|
|
ble copy_vec
|
|
|
|
ldmfd r13!,{r4-r10,pc} /* back to caller */
|
|
|
|
#endif /* #ifdef CONFIG_CM_REMAP */
|