mirror of
https://github.com/smaeul/u-boot.git
synced 2025-10-24 17:48:14 +01:00
25a4b8114a
Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
92 lines
1.7 KiB
ReStructuredText
92 lines
1.7 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
.. index::
|
|
single: pwm (command)
|
|
|
|
pwm command
|
|
===========
|
|
|
|
Synopsis
|
|
--------
|
|
|
|
::
|
|
|
|
pwm invert <pwm_dev_num> <channel> <polarity>
|
|
pwm config <pwm_dev_num> <channel> <period_ns> <duty_ns>
|
|
pwm enable <pwm_dev_num> <channel>
|
|
pwm disable <pwm_dev_num> <channel>
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
The ``pwm`` command is used to access and configure PWM (Pulse Width Modulation)
|
|
signals.
|
|
|
|
pwm invert
|
|
----------
|
|
|
|
* If the value of ``polarity`` is 0, the default polarity is used.
|
|
* If the value of ``polarity`` is 1, the polarity is inverted.
|
|
|
|
pwm config
|
|
----------
|
|
|
|
Configure the period and duty period in nanoseconds.
|
|
|
|
pwm enable
|
|
----------
|
|
|
|
Enable output on the configured device and channel.
|
|
|
|
pwm disable
|
|
-----------
|
|
|
|
Disable output on the configured device and channel.
|
|
|
|
pwm_dev_num
|
|
Device number of the pulse width modulation device
|
|
|
|
channel
|
|
Output channel of the PWM device
|
|
|
|
polarity
|
|
* 0 - Use normal polarity
|
|
* 1 - Use inverted polarity
|
|
|
|
duty_ns
|
|
Duty period in ns
|
|
|
|
period_ns
|
|
Period time in ns
|
|
|
|
Examples
|
|
--------
|
|
|
|
Configure device 0, channel 0 to 20 µs period and 14 µs (that is, 70%) duty period::
|
|
|
|
=> pwm config 0 0 20000 14000
|
|
|
|
Enable output on the configured device and channel::
|
|
|
|
=> pwm enable 0 0
|
|
|
|
Disable output on the configured device and channel::
|
|
|
|
=> pwm disable 0 0
|
|
|
|
Invert the signal on the configured device and channel::
|
|
|
|
=> pwm invert 0 0 1
|
|
|
|
Configuration
|
|
-------------
|
|
|
|
The ``pwm`` command is only available if CONFIG_CMD_PWM=y.
|
|
|
|
Return value
|
|
------------
|
|
|
|
If the command succeeds, the return value ``$?`` is set to 0. If an error occurs, the
|
|
return value ``$?`` is set to 1.
|