mirror of
				https://github.com/smaeul/u-boot.git
				synced 2025-10-24 17:48:14 +01:00 
			
		
		
		
	
		
			
				
	
	
		
			55 lines
		
	
	
		
			1.8 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			55 lines
		
	
	
		
			1.8 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
| This file contains status information for the port of U-Boot to the
 | |
| Galileo Evaluation Board.
 | |
| 
 | |
| Author: Josh Huber <huber@mclx.com>
 | |
| 	Mission Critical Linux, Inc.
 | |
| 
 | |
| The support for the Galileo Evaluation board is fairly minimal now.
 | |
| It's sufficient to boot Linux, but doesn't provide too much more than
 | |
| what's required to do this.
 | |
| 
 | |
| Both DUART channels are supported (to use the second one, you have to
 | |
| modify the board -- see the schematics for where to solder on the
 | |
| devices module).  The ethernet ports are supported, and the MPSC is
 | |
| supported as a console driver. (keep in mind that the kernel has no
 | |
| support for this yet)
 | |
| 
 | |
| There are still occaisonal lockups with the MPSC console driver due to
 | |
| (we think!) overrun problems.  If you're looking for something stable
 | |
| to use for Linux development, consider sticking with the DUART console
 | |
| for now.
 | |
| 
 | |
| Automatic memory sizing mostly works.  We've had problems with some
 | |
| combinations of memory.  Please send us email if you're having trouble
 | |
| with respect to the memory detection.
 | |
| 
 | |
| Right now, only the 512k boot flash is supported.  Support for the
 | |
| 16MB flash on the devices module is forthcoming.  Right now the flash
 | |
| is stored at the 256k boundry in flash, wasting a whole sector (64k!)
 | |
| for environment data.  This isn't really a big deal since we're not
 | |
| using the 512k for anything else. (Just U-Boot and the environment)
 | |
| 
 | |
| Finally, here is a sample output session:
 | |
| 
 | |
| U-Boot 1.0.0-pre1 (Jun  6 2001 - 12:45:11)
 | |
| 
 | |
| Initializing...
 | |
|   CPU:   MPC7400 (altivec enabled) v2.9
 | |
|   Board: EVB64260
 | |
|   DRAM:  256 MB
 | |
|   FLASH: 512 kB
 | |
|   In:    serial
 | |
|   Out:   serial
 | |
|   Err:   serial
 | |
| 
 | |
| =>
 | |
| 
 | |
| The default configuration should be correct for the evaluation board,
 | |
| as it's shipped from Galileo.  Keep in mind that the default baudrate
 | |
| is set to 38400, 8N1.
 | |
| 
 | |
| Good luck, and make sure to send any bugreports to us (or the
 | |
| u-boot-users list).
 | |
| 
 | |
| Josh
 |