Tim Harvey 0cc11dea89 imx: ventana: switch to SPL
Switch to an SPL image. The SPL for Ventana does the following:
 - setup i2c and read the factory programmed EEPROM to obtain DRAM config
   and model for board-specific calibration data
 - configure DRAM per CPU/size/layout/devices/calibration
 - load u-boot.img from NAND and jump to it

This allows for a single SPL+u-boot.img to replace the previous multiple boa
configurations.

Cc: Stefan Roese <sr@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Andy Ng <andreas2025@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tom Rini <trini@ti.com>

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-06-06 10:07:26 +02:00
..
2014-06-06 10:07:26 +02:00
2014-03-04 12:15:29 -05:00
2014-04-17 14:38:30 -04:00
2014-02-04 16:32:20 +01:00
2014-02-21 08:42:47 -05:00
2014-03-17 20:05:48 -06:00
2014-03-04 12:15:29 -05:00
2014-05-09 11:50:14 +02:00
2014-03-21 16:39:36 -04:00
2014-02-20 06:48:23 +01:00
2013-09-24 09:10:33 -04:00
2014-03-17 20:05:49 -06:00
2013-09-20 10:30:54 -04:00
2013-11-09 17:21:01 +01:00
2014-05-25 16:25:12 +02:00
2014-03-17 20:05:49 -06:00
2013-11-09 17:21:01 +01:00
2014-03-05 12:23:48 +01:00
2014-03-21 16:39:35 -04:00
2014-02-19 10:47:43 -05:00
2013-12-04 08:11:28 -05:00
2013-08-28 11:44:59 -04:00