mirror of
https://github.com/smaeul/u-boot.git
synced 2025-11-03 21:48:15 +00:00
9ecc1cabe1
VBE needs to load different images from a FIT depending on the xPL phase in use. The IH_PHASE value is used to select the image to load. Add the required logic to handle this. For compatibility with the SPL-loader driver, fill out a struct spl_image_info with the details needed to boot the next phase. This is good enough for VBE-simple but ABrec will need the full set of bootstd features. So add a USE_BOOTMETH define to control this. Signed-off-by: Simon Glass <sjg@chromium.org>
138 lines
4.5 KiB
C
138 lines
4.5 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Verified Boot for Embedded (VBE) common functions
|
|
*
|
|
* Copyright 2024 Google LLC
|
|
* Written by Simon Glass <sjg@chromium.org>
|
|
*/
|
|
|
|
#ifndef __VBE_COMMON_H
|
|
#define __VBE_COMMON_H
|
|
|
|
#include <linux/types.h>
|
|
|
|
struct spl_image_info;
|
|
struct udevice;
|
|
|
|
/*
|
|
* Controls whether we use a full bootmeth driver with VBE in this phase, or
|
|
* just access the information directly.
|
|
*
|
|
* For now VBE-simple uses the full bootmeth, but VBE-abrec does not, to reduce
|
|
* code size
|
|
*/
|
|
#define USE_BOOTMETH CONFIG_IS_ENABLED(BOOTMETH_VBE_SIMPLE)
|
|
|
|
enum {
|
|
MAX_VERSION_LEN = 256,
|
|
|
|
NVD_HDR_VER_SHIFT = 0,
|
|
NVD_HDR_VER_MASK = 0xf,
|
|
NVD_HDR_SIZE_SHIFT = 4,
|
|
NVD_HDR_SIZE_MASK = 0xf << NVD_HDR_SIZE_SHIFT,
|
|
|
|
/* Firmware key-version is in the top 16 bits of fw_ver */
|
|
FWVER_KEY_SHIFT = 16,
|
|
FWVER_FW_MASK = 0xffff,
|
|
|
|
NVD_HDR_VER_CUR = 1, /* current version */
|
|
};
|
|
|
|
/**
|
|
* struct vbe_nvdata - basic storage format for non-volatile data
|
|
*
|
|
* This is used for all VBE methods
|
|
*
|
|
* @crc8: crc8 for the entire record except @crc8 field itself
|
|
* @hdr: header size and version (NVD_HDR_...)
|
|
* @spare1: unused, must be 0
|
|
* @fw_vernum: version and key version (FWVER_...)
|
|
* @flags: Flags controlling operation (enum vbe_flags)
|
|
*/
|
|
struct vbe_nvdata {
|
|
u8 crc8;
|
|
u8 hdr;
|
|
u16 spare1;
|
|
u32 fw_vernum;
|
|
u32 flags;
|
|
u8 spare2[0x34];
|
|
};
|
|
|
|
/**
|
|
* vbe_get_blk() - Obtain the block device to use for VBE
|
|
*
|
|
* Decodes the string to produce a block device
|
|
*
|
|
* @storage: String indicating the device to use, e.g. "mmc1"
|
|
* @blkp: Returns associated block device, on success
|
|
* Return 0 if OK, -ENODEV if @storage does not end with a number, -E2BIG if
|
|
* the device name is more than 15 characters, -ENXIO if the block device could
|
|
* not be found
|
|
*/
|
|
int vbe_get_blk(const char *storage, struct udevice **blkp);
|
|
|
|
/**
|
|
* vbe_read_version() - Read version-string from a block device
|
|
*
|
|
* Reads the VBE version-string from a device. This function reads a single
|
|
* block from the device, so the string cannot be larger than that. It uses a
|
|
* temporary buffer for the read, then copies in up to @size bytes
|
|
*
|
|
* @blk: Device to read from
|
|
* @offset: Offset to read, in bytes
|
|
* @version: Place to put the string
|
|
* @max_size: Maximum size of @version
|
|
* Return: 0 if OK, -E2BIG if @max_size > block size, -EBADF if the offset is
|
|
* not block-aligned, -EIO if an I/O error occurred
|
|
*/
|
|
int vbe_read_version(struct udevice *blk, ulong offset, char *version,
|
|
int max_size);
|
|
|
|
/**
|
|
* vbe_read_nvdata() - Read non-volatile data from a block device
|
|
*
|
|
* Reads the VBE nvdata from a device. This function reads a single block from
|
|
* the device, so the nvdata cannot be larger than that.
|
|
*
|
|
* @blk: Device to read from
|
|
* @offset: Offset to read, in bytes
|
|
* @size: Number of bytes to read
|
|
* @buf: Buffer to hold the data
|
|
* Return: 0 if OK, -E2BIG if @size > block size, -EBADF if the offset is not
|
|
* block-aligned, -EIO if an I/O error occurred, -EPERM if the header version is
|
|
* incorrect, the header size is invalid or the data fails its CRC check
|
|
*/
|
|
int vbe_read_nvdata(struct udevice *blk, ulong offset, ulong size, u8 *buf);
|
|
|
|
/**
|
|
* vbe_read_fit() - Read an image from a FIT
|
|
*
|
|
* This handles most of the VBE logic for reading from a FIT. It reads the FIT
|
|
* metadata, decides which image to load and loads it to a suitable address,
|
|
* ready for jumping to the next phase of VBE.
|
|
*
|
|
* This supports transition from VPL to SPL as well as SPL to U-Boot proper. For
|
|
* now, TPL->VPL is not supported.
|
|
*
|
|
* Both embedded and external data are supported for the FIT
|
|
*
|
|
* @blk: Block device containing FIT
|
|
* @area_offset: Byte offset of the VBE area in @blk containing the FIT
|
|
* @area_size: Size of the VBE area
|
|
* @image: SPL image to fill in with details of the loaded image, or NULL
|
|
* @load_addrp: If non-null, returns the address where the image was loaded
|
|
* @lenp: If non-null, returns the size of the image loaded, in bytes
|
|
* @namep: If non-null, returns the name of the FIT-image node that was loaded
|
|
* (allocated by this function)
|
|
* Return: 0 if OK, -EINVAL if the area does not contain an FDT (the underlying
|
|
* format for FIT), -E2BIG if the FIT extends past @area_size, -ENOMEM if there
|
|
* was not space to allocate the image-node name, other error if a read error
|
|
* occurred (see blk_read()), or something went wrong with the actually
|
|
* FIT-parsing (see fit_image_load()).
|
|
*/
|
|
int vbe_read_fit(struct udevice *blk, ulong area_offset, ulong area_size,
|
|
struct spl_image_info *image, ulong *load_addrp, ulong *lenp,
|
|
char **namep);
|
|
|
|
#endif /* __VBE_ABREC_H */
|