mirror of
https://github.com/smaeul/u-boot.git
synced 2025-10-31 20:18:18 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
100 lines
4.2 KiB
C
100 lines
4.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2010
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
*/
|
|
|
|
#ifndef __MVMFP_H
|
|
#define __MVMFP_H
|
|
|
|
/*
|
|
* Header file for MultiFunctionPin (MFP) Configururation framework
|
|
*
|
|
* Processors Supported:
|
|
* 1. Marvell ARMADA100 Processors
|
|
*
|
|
* processor to be supported should be added here
|
|
*/
|
|
|
|
/*
|
|
* MFP configuration is represented by a 32-bit unsigned integer
|
|
*/
|
|
#ifdef CONFIG_MVMFP_V2
|
|
#define MFP(_off, _pull, _drv, _slp, _edge, _sleep, _afn) ( \
|
|
/* bits 31..16 - MFP Register Offset */ (((_off) & 0xffff) << 16) | \
|
|
/* bits 15..13 - Run Mode Pull State */ (((_pull) & 0x7) << 13) | \
|
|
/* bit 12..11 - Driver Strength */ (((_drv) & 0x3) << 11) | \
|
|
/* bits 10 - pad driver */ (((_slp) & 0x1) << 10) | \
|
|
/* bit 09..07 - sleep mode */ (((_sleep) & 0xe) << 6) | \
|
|
/* bits 06..04 - Edge Detection */ (((_edge) & 0x7) << 4) | \
|
|
/* bits 03 - sleep mode */ (((_sleep) & 0x1) << 3) | \
|
|
/* bits 02..00 - Alt-fun select */ ((_afn) & 0x7))
|
|
#else
|
|
#define MFP(_off, _pull, _drv, _slp, _edge, _sleep, _afn) ( \
|
|
/* bits 31..16 - MFP Register Offset */ (((_off) & 0xffff) << 16) | \
|
|
/* bits 15..13 - Run Mode Pull State */ (((_pull) & 0x7) << 13) | \
|
|
/* bit 12 - Unused */ \
|
|
/* bits 11..10 - Driver Strength */ (((_drv) & 0x3) << 10) | \
|
|
/* bit 09..07 - sleep mode */ (((_sleep) & 0xe) << 6) | \
|
|
/* bits 06..04 - Edge Detection */ (((_edge) & 0x7) << 4) | \
|
|
/* bits 03 - sleep mode */ (((_sleep) & 0x1) << 3) | \
|
|
/* bits 02..00 - Alt-fun select */ ((_afn) & 0x7))
|
|
#endif
|
|
|
|
/*
|
|
* to facilitate the definition, the following macros are provided
|
|
*
|
|
* offset, pull,pF, drv,dF, edge,eF ,afn,aF
|
|
*/
|
|
#define MFP_OFFSET_MASK MFP(0xffff, 0, 0, 0, 0, 0, 0)
|
|
#define MFP_REG(x) MFP(x, 0, 0, 0, 0, 0, 0)
|
|
#define MFP_REG_GET_OFFSET(x) ((x & MFP_OFFSET_MASK) >> 16)
|
|
|
|
#define MFP_AF0 MFP(0x0000, 0, 0, 0, 0, 0, 0)
|
|
#define MFP_AF1 MFP(0x0000, 0, 0, 0, 0, 0, 1)
|
|
#define MFP_AF2 MFP(0x0000, 0, 0, 0, 0, 0, 2)
|
|
#define MFP_AF3 MFP(0x0000, 0, 0, 0, 0, 0, 3)
|
|
#define MFP_AF4 MFP(0x0000, 0, 0, 0, 0, 0, 4)
|
|
#define MFP_AF5 MFP(0x0000, 0, 0, 0, 0, 0, 5)
|
|
#define MFP_AF6 MFP(0x0000, 0, 0, 0, 0, 0, 6)
|
|
#define MFP_AF7 MFP(0x0000, 0, 0, 0, 0, 0, 7)
|
|
#define MFP_AF_MASK MFP(0x0000, 0, 0, 0, 0, 0, 7)
|
|
|
|
#define MFP_SLEEP_CTRL2 MFP(0x0000, 0, 0, 0, 0, 1, 0)
|
|
#define MFP_SLEEP_DIR MFP(0x0000, 0, 0, 0, 0, 2, 0)
|
|
#define MFP_SLEEP_DATA MFP(0x0000, 0, 0, 0, 0, 4, 0)
|
|
#define MFP_SLEEP_CTRL MFP(0x0000, 0, 0, 0, 0, 8, 0)
|
|
#define MFP_SLEEP_MASK MFP(0x0000, 0, 0, 0, 0, 0xf, 0)
|
|
|
|
#define MFP_LPM_EDGE_NONE MFP(0x0000, 0, 0, 0, 4, 0, 0)
|
|
#define MFP_LPM_EDGE_RISE MFP(0x0000, 0, 0, 0, 1, 0, 0)
|
|
#define MFP_LPM_EDGE_FALL MFP(0x0000, 0, 0, 0, 2, 0, 0)
|
|
#define MFP_LPM_EDGE_BOTH MFP(0x0000, 0, 0, 0, 3, 0, 0)
|
|
#define MFP_LPM_EDGE_MASK MFP(0x0000, 0, 0, 0, 7, 0, 0)
|
|
|
|
#define MFP_SLP_DI MFP(0x0000, 0, 0, 1, 0, 0, 0)
|
|
|
|
#define MFP_DRIVE_VERY_SLOW MFP(0x0000, 0, 0, 0, 0, 0, 0)
|
|
#define MFP_DRIVE_SLOW MFP(0x0000, 0, 1, 0, 0, 0, 0)
|
|
#define MFP_DRIVE_MEDIUM MFP(0x0000, 0, 2, 0, 0, 0, 0)
|
|
#define MFP_DRIVE_FAST MFP(0x0000, 0, 3, 0, 0, 0, 0)
|
|
#define MFP_DRIVE_MASK MFP(0x0000, 0, 3, 0, 0, 0, 0)
|
|
|
|
#define MFP_PULL_NONE MFP(0x0000, 0, 0, 0, 0, 0, 0)
|
|
#define MFP_PULL_LOW MFP(0x0000, 5, 0, 0, 0, 0, 0)
|
|
#define MFP_PULL_HIGH MFP(0x0000, 6, 0, 0, 0, 0, 0)
|
|
#define MFP_PULL_BOTH MFP(0x0000, 7, 0, 0, 0, 0, 0)
|
|
#define MFP_PULL_FLOAT MFP(0x0000, 4, 0, 0, 0, 0, 0)
|
|
#define MFP_PULL_MASK MFP(0x0000, 7, 0, 0, 0, 0, 0)
|
|
|
|
#define MFP_VALUE_MASK (MFP_PULL_MASK | MFP_DRIVE_MASK | MFP_SLP_DI \
|
|
| MFP_LPM_EDGE_MASK | MFP_SLEEP_MASK \
|
|
| MFP_AF_MASK)
|
|
#define MFP_EOC 0xffffffff /* indicates end-of-conf */
|
|
|
|
/* Functions */
|
|
void mfp_config(u32 *mfp_cfgs);
|
|
|
|
#endif /* __MVMFP_H */
|