mirror of
https://github.com/smaeul/u-boot.git
synced 2025-10-17 22:28:17 +01:00
d27c3431ae
The Rock 5 ITX is a board in ITX form factor using the RK3588 SoC It can be powered either by 12V, ATX power-supply or PoE. Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot, 2*2.5Gb PCIe-connected Ethernet NICs. Display options are 2*HDMI, DP via USB-c, eDP + 2*DSI via PCB connectors. USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel connector. Schematics for the board can be found on - https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf - https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf The naming scheme with the dashes follows Dragan's comment on the mainline devicetree commit: "the name of this board deviates from the standard Radxa naming scheme, which is something like "ROCK <number><letter>" thus, "rock-5a" is fine, but it should be "rock-5-itx", simply because there's a space between "5" and "ITX" in "ROCK 5 ITX" Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.