mirror of
				https://github.com/smaeul/u-boot.git
				synced 2025-10-31 03:58:17 +00:00 
			
		
		
		
	This brings in the required dts/dtsi files for the TI8168-EVM from the Linux Kernel v4.11 release. Signed-off-by: Tom Rini <trini@konsulko.com>
		
			
				
	
	
		
			176 lines
		
	
	
		
			4.0 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			176 lines
		
	
	
		
			4.0 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
| /*
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License version 2 as
 | |
|  * published by the Free Software Foundation.
 | |
|  */
 | |
| /dts-v1/;
 | |
| 
 | |
| #include "dm816x.dtsi"
 | |
| #include <dt-bindings/interrupt-controller/irq.h>
 | |
| 
 | |
| / {
 | |
| 	model = "DM8168 EVM";
 | |
| 	compatible = "ti,dm8168-evm", "ti,dm8168";
 | |
| 
 | |
| 	memory@80000000 {
 | |
| 		device_type = "memory";
 | |
| 		reg = <0x80000000 0x40000000	/* 1 GB */
 | |
| 		       0xc0000000 0x40000000>;	/* 1 GB */
 | |
| 	};
 | |
| 
 | |
| 	/* FDC6331L controlled by SD_POW pin */
 | |
| 	vmmcsd_fixed: fixedregulator0 {
 | |
| 		compatible = "regulator-fixed";
 | |
| 		regulator-name = "vmmcsd_fixed";
 | |
| 		regulator-min-microvolt = <3300000>;
 | |
| 		regulator-max-microvolt = <3300000>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &dm816x_pinmux {
 | |
| 	mcspi1_pins: pinmux_mcspi1_pins {
 | |
| 		pinctrl-single,pins = <
 | |
| 			DM816X_IOPAD(0x0a94, MUX_MODE0)			/* SPI_SCLK */
 | |
| 			DM816X_IOPAD(0x0a98, MUX_MODE0)			/* SPI_SCS0 */
 | |
| 			DM816X_IOPAD(0x0aa8, MUX_MODE0)			/* SPI_D0 */
 | |
| 			DM816X_IOPAD(0x0aac, MUX_MODE0)			/* SPI_D1 */
 | |
| 		>;
 | |
| 	};
 | |
| 
 | |
| 	mmc_pins: pinmux_mmc_pins {
 | |
| 		pinctrl-single,pins = <
 | |
| 			DM816X_IOPAD(0x0a70, MUX_MODE0)			/* SD_POW */
 | |
| 			DM816X_IOPAD(0x0a74, MUX_MODE0)			/* SD_CLK */
 | |
| 			DM816X_IOPAD(0x0a78, MUX_MODE0)			/* SD_CMD */
 | |
| 			DM816X_IOPAD(0x0a7C, MUX_MODE0)			/* SD_DAT0 */
 | |
| 			DM816X_IOPAD(0x0a80, MUX_MODE0)			/* SD_DAT1 */
 | |
| 			DM816X_IOPAD(0x0a84, MUX_MODE0)			/* SD_DAT2 */
 | |
| 			DM816X_IOPAD(0x0a88, MUX_MODE0)			/* SD_DAT2 */
 | |
| 			DM816X_IOPAD(0x0a8c, MUX_MODE2)			/* GP1[7] */
 | |
| 			DM816X_IOPAD(0x0a90, MUX_MODE2)			/* GP1[8] */
 | |
| 		>;
 | |
| 	};
 | |
| 
 | |
| 	usb0_pins: pinmux_usb0_pins {
 | |
| 		pinctrl-single,pins = <
 | |
| 			DM816X_IOPAD(0x0d04, MUX_MODE0)			/* USB0_DRVVBUS */
 | |
| 		>;
 | |
| 	};
 | |
| 
 | |
| 	usb1_pins: pinmux_usb1_pins {
 | |
| 		pinctrl-single,pins = <
 | |
| 			DM816X_IOPAD(0x0d08, MUX_MODE0)			/* USB1_DRVVBUS */
 | |
| 		>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &i2c1 {
 | |
| 	extgpio0: pcf8575@20 {
 | |
| 		compatible = "nxp,pcf8575";
 | |
| 		reg = <0x20>;
 | |
| 		gpio-controller;
 | |
| 		#gpio-cells = <2>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &i2c2 {
 | |
| 	extgpio1: pcf8575@20 {
 | |
| 		compatible = "nxp,pcf8575";
 | |
| 		reg = <0x20>;
 | |
| 		gpio-controller;
 | |
| 		#gpio-cells = <2>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &gpmc {
 | |
| 	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
 | |
| 
 | |
| 	nand@0,0 {
 | |
| 		compatible = "ti,omap2-nand";
 | |
| 		linux,mtd-name= "micron,mt29f2g16aadwp";
 | |
| 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 | |
| 		interrupt-parent = <&gpmc>;
 | |
| 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 | |
| 			     <1 IRQ_TYPE_NONE>; /* termcount */
 | |
| 		#address-cells = <1>;
 | |
| 		#size-cells = <1>;
 | |
| 		ti,nand-ecc-opt = "bch8";
 | |
| 		nand-bus-width = <16>;
 | |
| 		gpmc,device-width = <2>;
 | |
| 		gpmc,sync-clk-ps = <0>;
 | |
| 		gpmc,cs-on-ns = <0>;
 | |
| 		gpmc,cs-rd-off-ns = <44>;
 | |
| 		gpmc,cs-wr-off-ns = <44>;
 | |
| 		gpmc,adv-on-ns = <6>;
 | |
| 		gpmc,adv-rd-off-ns = <34>;
 | |
| 		gpmc,adv-wr-off-ns = <44>;
 | |
| 		gpmc,we-on-ns = <0>;
 | |
| 		gpmc,we-off-ns = <40>;
 | |
| 		gpmc,oe-on-ns = <0>;
 | |
| 		gpmc,oe-off-ns = <54>;
 | |
| 		gpmc,access-ns = <64>;
 | |
| 		gpmc,rd-cycle-ns = <82>;
 | |
| 		gpmc,wr-cycle-ns = <82>;
 | |
| 		gpmc,bus-turnaround-ns = <0>;
 | |
| 		gpmc,cycle2cycle-delay-ns = <0>;
 | |
| 		gpmc,clk-activation-ns = <0>;
 | |
| 		gpmc,wr-access-ns = <40>;
 | |
| 		gpmc,wr-data-mux-bus-ns = <0>;
 | |
| 		partition@0 {
 | |
| 			label = "X-Loader";
 | |
| 			reg = <0 0x80000>;
 | |
| 		};
 | |
| 		partition@0x80000 {
 | |
| 			label = "U-Boot";
 | |
| 			reg = <0x80000 0x1c0000>;
 | |
| 		};
 | |
| 		partition@0x1c0000 {
 | |
| 			label = "Environment";
 | |
| 			reg = <0x240000 0x40000>;
 | |
| 		};
 | |
| 		partition@0x280000 {
 | |
| 			label = "Kernel";
 | |
| 			reg = <0x280000 0x500000>;
 | |
| 		};
 | |
| 		partition@0x780000 {
 | |
| 			label = "Filesystem";
 | |
| 			reg = <0x780000 0xf880000>;
 | |
| 		};
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &mcspi1 {
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&mcspi1_pins>;
 | |
| 
 | |
| 	m25p80@0 {
 | |
| 		compatible = "w25x32";
 | |
| 		spi-max-frequency = <48000000>;
 | |
| 		reg = <0>;
 | |
| 		#address-cells = <1>;
 | |
| 		#size-cells = <1>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &mmc1 {
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&mmc_pins>;
 | |
| 	vmmc-supply = <&vmmcsd_fixed>;
 | |
| 	bus-width = <4>;
 | |
| 	cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 | |
| 	wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 | |
| };
 | |
| 
 | |
| /* At least dm8168-evm rev c won't support multipoint, later may */
 | |
| &usb0 {
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&usb0_pins>;
 | |
| 	mentor,multipoint = <0>;
 | |
| };
 | |
| 
 | |
| &usb1 {
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&usb1_pins>;
 | |
| 	mentor,multipoint = <0>;
 | |
| };
 |