smaeul-u-boot/arch/mips/dts/luton_pcb091.dts

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2018 Microsemi Corporation
 */

/dts-v1/;
#include "mscc,luton.dtsi"

/ {
	model = "Luton10 PCB091 Reference Board";
	compatible = "mscc,luton-pcb091", "mscc,luton";

	aliases {
		serial0 = &uart0;
		spi0 = &spi0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	gpio-leds {
		compatible = "gpio-leds";

		top_dimmer {
			label = "pcb091:top:dimmer";
			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
			default-state = "on";
		};

		status_green {
			label = "pcb091:green:status";
			gpios = <&sgpio 26 GPIO_ACTIVE_HIGH>; /* p26.0 */
			default-state = "on";
		};

		status_red {
			label = "pcb091:red:status";
			gpios = <&sgpio 58 GPIO_ACTIVE_HIGH>; /* p26.1 */
			default-state = "off";
		};
	};
};

&sgpio {
	status = "okay";
	mscc,sgpio-ports = <0xFFF000FF>;
};

&uart0 {
	status = "okay";
};

&spi0 {
	status = "okay";
	spi-flash@0 {
		compatible = "jedec,spi-nor";
		spi-max-frequency = <18000000>; /* input clock */
		reg = <0>; /* CS0 */
		spi-cs-high;
	};
};

&mdio0 {
	status = "okay";

	phy0: ethernet-phy@0 {
		reg = <0>;
	};
	phy1: ethernet-phy@1 {
		reg = <1>;
	};
	phy2: ethernet-phy@2 {
		reg = <2>;
	};
	phy3: ethernet-phy@3 {
		reg = <3>;
	};
	phy4: ethernet-phy@4 {
		reg = <4>;
	};
	phy5: ethernet-phy@5 {
		reg = <5>;
	};
	phy6: ethernet-phy@6 {
		reg = <6>;
	};
	phy7: ethernet-phy@7 {
		reg = <7>;
	};
	phy8: ethernet-phy@8 {
		reg = <8>;
	};
	phy9: ethernet-phy@9 {
		reg = <9>;
	};
	phy10: ethernet-phy@10 {
		reg = <10>;
	};
	phy11: ethernet-phy@11 {
		reg = <11>;
	};
};

&switch {
	ethernet-ports {
		port0: port@0 {
			reg = <0>;
			phy-handle = <&phy0>;
		};
		port1: port@1 {
			reg = <1>;
			phy-handle = <&phy1>;
		};
		port2: port@2 {
			reg = <2>;
			phy-handle = <&phy2>;
		};
		port3: port@3 {
			reg = <3>;
			phy-handle = <&phy3>;
		};
		port4: port@4 {
			reg = <4>;
			phy-handle = <&phy4>;
		};
		port5: port@5 {
			reg = <5>;
			phy-handle = <&phy5>;
		};
		port6: port@6 {
			reg = <6>;
			phy-handle = <&phy6>;
		};
		port7: port@7 {
			reg = <7>;
			phy-handle = <&phy7>;
		};
		port8: port@8 {
			reg = <8>;
			phy-handle = <&phy8>;
		};
		port9: port@9 {
			reg = <9>;
			phy-handle = <&phy9>;
		};
		port10: port@10 {
			reg = <10>;
			phy-handle = <&phy10>;
		};
		port11: port@11 {
			reg = <11>;
			phy-handle = <&phy11>;
		};
	};
};