random-mirrors/smaeul-u-boot
1
0
Fork 0
mirror of https://github.com/smaeul/u-boot.git synced 2025-10-31 20:18:18 +00:00
Code Issues Packages Projects Releases Wiki Activity
smaeul-u-boot/board/cssi/cmpc885/cmpc885.c
Hugo Dubois 68294fcd9e board: cssi: Properly initialise MAC address for fibre on CMPC885 board 
CMPC885 board can be pluged on a mother board with fibre interface, so
fibre interface MAC address must be initialised for that case.

Signed-off-by: Hugo Dubois <hugo.dubois.ext@csgroup.eu>
Reviewed-by: CASAUBON Jean Michel <jean-michel.casaubon@csgroup.eu>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2024-04-18 15:47:46 +02:00

896 lines
28 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2010-2020 CS Group
* Charles Frey <charles.frey@c-s.fr>
* Florent Trinh Thai <florent.trinh-thai@c-s.fr>
* Christophe Leroy <christophe.leroy@c-s.fr>
*
* Board specific routines for the CMPC885 board
*/
#include <env.h>
#include <mpc8xx.h>
#include <asm/cpm_8xx.h>
#include <asm/io.h>
#include <dm.h>
#include <stdio.h>
#include <stdarg.h>
#include <watchdog.h>
#include <serial.h>
#include <hang.h>
#include <flash.h>
#include <init.h>
#include <fdt_support.h>
#include <linux/delay.h>
#include <spi.h>
#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
#define ADDR_CPLD_R_RESET ((unsigned short __iomem *)CONFIG_CPLD_BASE)
#define ADDR_CPLD_R_ETAT ((unsigned short __iomem *)(CONFIG_CPLD_BASE + 2))
#define ADDR_CPLD_R_TYPE ((unsigned char __iomem *)(CONFIG_CPLD_BASE + 3))
#define PATH_PHY2 "/soc@ff000000/mdio@e00/ethernet-phy@2"
#define PATH_PHY3 "/soc@ff000000/mdio@e00/ethernet-phy@3"
#define PATH_ETH1 "/soc@ff000000/ethernet@1e00"
#define FIBER_PHY PATH_PHY2
#define R_ETAT_PRES_BASE 0x0040
#define R_RESET_STATUS 0x0400
#define R_RST_STATUS 0x0004
int ft_board_setup(void *blob, struct bd_info *bd)
{
const char *sync = "receive";
ft_cpu_setup(blob, bd);
/* BRG */
do_fixup_by_path_u32(blob, "/soc/cpm", "brg-frequency", bd->bi_busfreq, 1);
/* MAC addr */
fdt_fixup_ethernet(blob);
/* Bus Frequency for CPM */
do_fixup_by_path_u32(blob, "/soc", "bus-frequency", bd->bi_busfreq, 1);
/* E1 interface - Set data rate */
do_fixup_by_path_u32(blob, "/localbus/e1", "data-rate", 2, 1);
/* E1 interface - Set channel phase to 0 */
do_fixup_by_path_u32(blob, "/localbus/e1", "channel-phase", 0, 1);
/* E1 interface - rising edge sync pulse transmit */
do_fixup_by_path(blob, "/localbus/e1", "rising-edge-sync-pulse", sync, strlen(sync), 1);
/* MIAE only */
if (!(in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE))
return 0;
return ft_board_setup_common(blob);
}
void ft_board_setup_phy3(void)
{
/* switch to phy3 with gpio, we'll only use phy3 */
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
cpm8xx_t __iomem *cp = (cpm8xx_t __iomem *)&immr->im_cpm;
setbits_be32(&cp->cp_pedat, 0x00002000);
}
int checkboard(void)
{
serial_puts("Board: ");
/* Is a motherboard present ? */
if (in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE)
return checkboard_common();
printf("CMPC885 (CS GROUP)\n");
return 0;
}
#define MAX_SPI_BYTES 0x20
#define EE_OFF_MAC1 0x10
#define EE_OFF_MAC2 0x16
/* Reads MAC addresses from SPI EEPROM */
static int setup_mac(void)
{
uchar din[MAX_SPI_BYTES];
int ret;
unsigned long ident = 0x08005120;
ret = read_eeprom(din, sizeof(din));
if (ret)
return ret;
if (memcmp(din + EE_OFF_MAC1, &ident, sizeof(ident)) == 0)
eth_env_set_enetaddr("ethaddr", din + EE_OFF_MAC1);
if (memcmp(din + EE_OFF_MAC2, &ident, sizeof(ident)) == 0) {
eth_env_set_enetaddr("eth1addr", din + EE_OFF_MAC2);
eth_env_set_enetaddr("eth2addr", din + EE_OFF_MAC2);
}
return 0;
}
int misc_init_r(void)
{
/* Verify mother board presence */
if (in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE) {
misc_init_r_common();
} else {
env_set("config", CFG_BOARD_CMPCXXX);
env_set("hostname", CFG_BOARD_CMPCXXX);
}
if (setup_mac())
printf("Error retrieving mac addresses\n");
/* Protection ON by default */
flash_protect(FLAG_PROTECT_SET, CFG_SYS_FLASH_BASE, 0xffffffff, &flash_info[0]);
return 0;
}
void iop_setup_mcr(void)
{
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
iop8xx_t __iomem *iop = &immr->im_ioport;
cpm8xx_t __iomem *cp = &immr->im_cpm;
/* Wait reset on FPGA_F */
udelay(100);
/* We must initialize data before changing direction */
setbits_be16(&iop->iop_pcdat, 0x088E);
setbits_be16(&iop->iop_pddat, 0x0001);
setbits_be32(&cp->cp_pbdat, 0x00029510);
setbits_be32(&cp->cp_pedat, 0x00000002);
/*
* PAPAR[13] = 0 [0x0004] -> GPIO: ()
* PAPAR[12] = 0 [0x0008] -> GPIO: ()
* PAPAR[9] = 1 [0x0040] -> GPIO: (PCM_IN_12_MPC)
* PAPAR[8] = 1 [0x0080] -> GPIO: (PCM_OUT_12_MPC)
* PAPAR[7] = 1 [0x0100] -> GPIO: (TDM_BCLK_MPC)
* PAPAR[6] = 1 [0x0200] -> GPIO: (CLK2)
*/
clrsetbits_be16(&iop->iop_papar, 0x03CC, 0x03C0);
/*
* PBODR[16] = 1 [0x00008000] -> GPIO: (PROG_FPGA_MEZZ)
*/
setbits_be16(&cp->cp_pbodr, 0x00008000);
/*
* PBDIR[27] = 1 [0x00000010] -> GPIO: (WR_TEMP2)
* PBDIR[26] = 1 [0x00000020] -> GPIO: (BRG02)
* PBDIR[23] = 1 [0x00000100] -> GPIO: (CS_TEMP2)
* PBDIR[18] = 1 [0x00002000] -> GPIO: (RTS2)
* PBDIR[16] = 1 [0x00008000] -> GPIO: (PROG_FPGA_MEZZ)
* PBDIR[15] = 1 [0x00010000] -> GPIO: (BRG03)
* PBDIR[14] = 1 [0x00020000] -> GPIO: (CS_TEMP)
*/
setbits_be32(&cp->cp_pbdir, 0x0003A130);
/*
* PBPAR[20] = 1 [0x00000800] -> GPIO: (SMRXD2)
* PBPAR[17] = 0 [0x00004000] -> GPIO: (DONE_FPGA_MEZZ)
* PBPAR[16] = 0 [0x00008000] -> GPIO: (PROG_FPGA_MEZZ)
*/
clrsetbits_be32(&cp->cp_pbpar, 0x0000C800, 0x00000800);
/*
* PCPAR[14] = 0 [0x0002] -> GPIO: (CS_POT2)
*/
clrbits_be16(&iop->iop_pcpar, 0x0002);
/*
* PDPAR[14] = 1 [0x0002] -> GPIO: (TDM_FS_MPC)
* PDPAR[11] = 1 [0x0010] -> GPIO: (RXD3)
* PDPAR[10] = 1 [0x0020] -> GPIO: (TXD3)
* PDPAR[9] = 1 [0x0040] -> GPIO: (TXD4)
* PDPAR[7] = 1 [0x0100] -> GPIO: (RTS3)
* PDPAR[5] = 1 [0x0400] -> GPIO: (CLK8)
* PDPAR[3] = 1 [0x1000] -> GPIO: (CLK7)
*/
setbits_be16(&iop->iop_pdpar, 0x1572);
/*
* PEPAR[27] = 1 [0x00000010] -> GPIO: (R2_RXER)
* PEPAR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV)
* PEPAR[25] = 1 [0x00000040] -> GPIO: (RXD4)
* PEPAR[24] = 1 [0x00000080] -> GPIO: (BRG01)
* PEPAR[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
* PEPAR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1)
* PEPAR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0)
* PEPAR[20] = 1 [0x00000800] -> GPIO: (SMTXD2)
* PEPAR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
* PEPAR[17] = 1 [0x00004000] -> GPIO: (CLK5)
* PEPAR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK)
* PEPAR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
* PEPAR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
*/
clrsetbits_be32(&cp->cp_pepar, 0x0003DFF0, 0x0003DEF0);
/*
* PADIR[9] = 1 [0x0040] -> GPIO: (PCM_IN_12_MPC)
* PADIR[8] = 1 [0x0080] -> GPIO: (PCM_OUT_12_MPC)
* PADIR[5] = 1 [0x0400] -> GPIO: ()
*/
setbits_be16(&iop->iop_padir, 0x04C0);
/*
* PCDIR[15] = 1 [0x0001] -> GPIO: (WP_EEPROM2)
* PCDIR[14] = 1 [0x0002] -> GPIO: (CS_POT2)
* PCDIR[13] = 1 [0x0004] -> GPIO: (CS_POT1)
* PCDIR[12] = 1 [0x0008] -> GPIO: (CS_EEPROM2)
* PCDIR[8] = 1 [0x0080] -> GPIO: (CS_CODEC_FAV)
* PCDIR[4] = 1 [0x0800] -> GPIO: (CS_CODEC_RADIO)
*/
setbits_be16(&iop->iop_pcdir, 0x088F);
/*
* PDDIR[9] = 1 [0x0040] -> GPIO: (TXD4)
* PDDIR[6] = 0 [0x0200] -> GPIO: (INIT_FPGA_RADIO)
* PDDIR[2] = x [0x2000] -> Reserved
* PDDIR[1] = 0 [0x4000] -> ODR for PD10 : (TXD3)
* PDDIR[0] = 0 [0x8000] -> ODR for PD8 : (R_MDC)
*/
clrsetbits_be16(&iop->iop_pddir, 0xC240, 0x0040);
/*
* PEDIR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE)
* PEDIR[27] = 1 [0x00000010] -> GPIO: (R2_RXER)
* PEDIR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV)
* PEDIR[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
* PEDIR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1)
* PEDIR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0)
* PEDIR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
* PEDIR[18] = 1 [0x00002000] -> GPIO: (PROG_FPGA_RADIO)
* PEDIR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK)
* PEDIR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
* PEDIR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
*/
clrsetbits_be32(&cp->cp_pedir, 0x0003B732, 0x0003B632);
/*
* PAODR[10] = 1 [0x0020] -> GPIO: (INIT_FPGA_F)
*/
setbits_be16(&iop->iop_paodr, 0x0020); // set_bit
/*
* PEODR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE)
* PEODR[18] = 1 [0x00002000] -> GPIO: (FPGA_RADIO)
*/
setbits_be32(&cp->cp_peodr, 0x00002002);
/*
* PESO[24] = 1 [0x00000080] -> GPIO: (BRG01)
* PESO[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
* PESO[20] = 1 [0x00000800] -> GPIO: (SMTXD2)
* PESO[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
* PESO[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
* PESO[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
*/
clrsetbits_be32(&cp->cp_peso, 0x00031980, 0x00031880);
/* Disable CS for device */
/* PROGFPGA down */
clrbits_be32(&cp->cp_pbdat, 0x00008000);
/* PROGFPGA down */
clrbits_be32(&cp->cp_pedat, 0x00002000);
udelay(1); /* Wait more than 300ns */
/*
* We do not set the PROG signal of the C4E1 because
* there is a conflic with the CS of the EEPROM.
* I don't know why there is not the same problem
* with the FPGA_R
*/
/* PROGFPGA up */
setbits_be32(&cp->cp_pedat, 0x00002000);
}
static void iop_setup_cmpc885(void)
{
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
iop8xx_t __iomem *iop = &immr->im_ioport;
cpm8xx_t __iomem *cp = &immr->im_cpm;
/* We must initialize data before changing direction */
out_be16(&iop->iop_pcdat, 0x0000);
out_be16(&iop->iop_pddat, 0x0001);
out_be32(&cp->cp_pbdat, 0x00021400);
out_be32(&cp->cp_pedat, 0x00000000);
/*
* PAPAR[13] = 0 [0x0004] -> GPIO: ()
* PAPAR[12] = 0 [0x0008] -> GPIO: ()
* PAPAR[9] = 0 [0x0040] -> GPIO: ()
* PAPAR[8] = 0 [0x0080] -> GPIO: ()
* PAPAR[7] = 0 [0x0100] -> GPIO: ()
* PAPAR[6] = 0 [0x0200] -> GPIO: ()
*/
clrbits_be16(&iop->iop_papar, 0x03CC);
/*
* PBPAR[20] = 0 [0x00000800] -> GPIO: ()
* PBPAR[17] = 0 [0x00004000] -> GPIO: ()
* PBPAR[16] = 0 [0x00008000] -> GPIO: ()
*/
clrbits_be32(&cp->cp_pbpar, 0x0000C800);
/*
* PCPAR[14] = 0 [0x0002] -> GPIO: ()
*/
clrbits_be16(&iop->iop_pcpar, 0x0002);
/*
* PDPAR[14] = 0 [0x0002] -> GPIO: ()
* PDPAR[11] = 0 [0x0010] -> GPIO: ()
* PDPAR[10] = 0 [0x0020] -> GPIO: ()
* PDPAR[9] = 0 [0x0040] -> GPIO: ()
* PDPAR[7] = 0 [0x0100] -> GPIO: ()
* PDPAR[5] = 0 [0x0400] -> GPIO: ()
* PDPAR[3] = 0 [0x1000] -> GPIO: ()
*/
clrbits_be16(&iop->iop_pdpar, 0x1572);
/*
* PEPAR[27] = 0 [0x00000010] -> GPIO: ()
* PEPAR[26] = 0 [0x00000020] -> GPIO: ()
* PEPAR[25] = 0 [0x00000040] -> GPIO: ()
* PEPAR[24] = 0 [0x00000080] -> GPIO: ()
* PEPAR[23] = 0 [0x00000100] -> GPIO: ()
* PEPAR[22] = 0 [0x00000200] -> GPIO: ()
* PEPAR[21] = 0 [0x00000400] -> GPIO: ()
* PEPAR[20] = 0 [0x00000800] -> GPIO: ()
* PEPAR[19] = 0 [0x00001000] -> GPIO: ()
* PEPAR[17] = 0 [0x00004000] -> GPIO: ()
* PEPAR[16] = 0 [0x00008000] -> GPIO: ()
* PEPAR[15] = 0 [0x00010000] -> GPIO: ()
* PEPAR[14] = 0 [0x00020000] -> GPIO: ()
*/
clrbits_be32(&cp->cp_pepar, 0x0003DFF0);
/*
* PADIR[9] = 0 [0x0040] -> GPIO: ()
* PADIR[8] = 0 [0x0080] -> GPIO: ()
* PADIR[5] = 0 [0x0400] -> GPIO: ()
*/
clrbits_be16(&iop->iop_padir, 0x04C0);
/*
* In/Out or per. Function 0/1
* PBDIR[27] = 0 [0x00000010] -> GPIO: ()
* PBDIR[26] = 0 [0x00000020] -> GPIO: ()
* PBDIR[23] = 0 [0x00000100] -> GPIO: ()
* PBDIR[17] = 0 [0x00004000] -> GPIO: ()
* PBDIR[16] = 0 [0x00008000] -> GPIO: ()
*/
clrbits_be32(&cp->cp_pbdir, 0x0000C130);
/*
* PCDIR[15] = 0 [0x0001] -> GPIO: ()
* PCDIR[14] = 0 [0x0002] -> GPIO: ()
* PCDIR[13] = 0 [0x0004] -> GPIO: ()
* PCDIR[12] = 0 [0x0008] -> GPIO: ()
* PCDIR[8] = 0 [0x0080] -> GPIO: ()
* PCDIR[4] = 0 [0x0800] -> GPIO: ()
*/
clrbits_be16(&iop->iop_pcdir, 0x088F);
/*
* PDDIR[9] = 0 [0x0040] -> GPIO: ()
* PDDIR[6] = 0 [0x0200] -> GPIO: ()
* PDDIR[2] = x [0x2000] -> Reserved
* PDDIR[1] = 0 [0x4000] -> ODR for PD10 : ()
* PDDIR[0] = 0 [0x8000] -> ODR for PD8 : (R_MDC)
*/
clrbits_be16(&iop->iop_pddir, 0xC240);
/*
* PEDIR[30] = 0 [0x00000002] -> GPIO: ()
* PEDIR[27] = 0 [0x00000010] -> GPIO: ()
* PEDIR[26] = 0 [0x00000020] -> GPIO: ()
* PEDIR[23] = 0 [0x00000100] -> GPIO: ()
* PEDIR[22] = 0 [0x00000200] -> GPIO: ()
* PEDIR[21] = 0 [0x00000400] -> GPIO: ()
* PEDIR[19] = 0 [0x00001000] -> GPIO: ()
* PEDIR[18] = 0 [0x00002000] -> GPIO: ()
* PEDIR[16] = 0 [0x00008000] -> GPIO: ()
* PEDIR[15] = 0 [0x00010000] -> GPIO: ()
* PEDIR[14] = 0 [0x00020000] -> GPIO: ()
*/
clrbits_be32(&cp->cp_pedir, 0x0003B732);
/*
* PAODR[10] = 0 [0x0020] -> GPIO: ()
*/
clrbits_be16(&iop->iop_paodr, 0x0020);
/*
* PBODR[16] = 0 [0x00008000] -> GPIO: ()
*/
clrbits_be16(&cp->cp_pbodr, 0x00008000);
/*
* PEODR[30] = 0 [0x00000002] -> GPIO: ()
* PEODR[18] = 0 [0x00002000] -> GPIO: ()
*/
clrbits_be32(&cp->cp_peodr, 0x00002002);
/*
* PESO[24] = 0 [0x00000080] -> GPIO: ()
* PESO[23] = 0 [0x00000100] -> GPIO: ()
* PESO[20] = 0 [0x00000800] -> GPIO: ()
* PESO[19] = 0 [0x00001000] -> GPIO: ()
* PESO[15] = 0 [0x00010000] -> GPIO: ()
* PESO[14] = 0 [0x00020000] -> GPIO: ()
*/
clrbits_be32(&cp->cp_peso, 0x00031980);
}
void iop_setup_miae(void)
{
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
iop8xx_t __iomem *iop = &immr->im_ioport;
cpm8xx_t __iomem *cp = &immr->im_cpm;
/* Wait reset on FPGA_F */
udelay(100);
/* Load CPM relocation code */
cpm_load_patch(cp);
/* Set the front panel LED color to red */
clrbits_8((unsigned char __iomem *)CONFIG_FPGA_BASE + 0x44, 0x02);
/* We must initialize data before changing direction */
setbits_be16(&iop->iop_pcdat, 0x0888);
setbits_be16(&iop->iop_pddat, 0x0201);
setbits_be32(&cp->cp_pbdat, 0x00021510);
setbits_be32(&cp->cp_pedat, 0x00000002);
/*
* PAPAR[13] = 1 [0x0004] -> GPIO: (RXD2)
* PAPAR[12] = 1 [0x0008] -> GPIO: (TXD2)
* PAPAR[9] = 1 [0x0040] -> GPIO: (TDM1O)
* PAPAR[8] = 1 [0x0080] -> GPIO: (TDM1I)
* PAPAR[7] = 1 [0x0100] -> GPIO: (TDM_BCLK_MPC)
* PAPAR[6] = 1 [0x0200] -> GPIO: (CLK2)
*/
setbits_be16(&iop->iop_papar, 0x03CC);
/*
* PBODR[16] = 0 [0x00008000] -> GPIO: (L1ST4)
*/
clrbits_be16(&cp->cp_pbodr, 0x00008000);
/*
* PBDIR[27] = 1 [0x00000010] -> GPIO: (WR_TEMP2)
* PBDIR[26] = 1 [0x00000020] -> GPIO: (BRG02)
* PBDIR[23] = 1 [0x00000100] -> GPIO: (CS_TEMP2)
* PBDIR[18] = 1 [0x00002000] -> GPIO: (RTS2)
* PBDIR[16] = 0 [0x00008000] -> GPIO: (L1ST4)
* PBDIR[15] = 1 [0x00010000] -> GPIO: (BRG03)
* PBDIR[14] = 1 [0x00020000] -> GPIO: (CS_TEMP)
*/
clrsetbits_be32(&cp->cp_pbdir, 0x0003A130, 0x00032130);
/*
* PBPAR[20] = 1 [0x00000800] -> GPIO: (SMRXD2)
* PBPAR[17] = 1 [0x00004000] -> GPIO: (L1ST3)
* PBPAR[16] = 1 [0x00008000] -> GPIO: (L1ST4)
*/
setbits_be32(&cp->cp_pbpar, 0x0000C800);
/*
* PCPAR[14] = 1 [0x0002] -> GPIO: (L1ST2)
*/
setbits_be16(&iop->iop_pcpar, 0x0002);
/*
* PDPAR[14] = 1 [0x0002] -> GPIO: (TDM_FS_MPC)
* PDPAR[11] = 1 [0x0010] -> GPIO: (RXD3)
* PDPAR[10] = 1 [0x0020] -> GPIO: (TXD3)
* PDPAR[9] = 1 [0x0040] -> GPIO: (TXD4)
* PDPAR[7] = 1 [0x0100] -> GPIO: (RTS3)
* PDPAR[5] = 1 [0x0400] -> GPIO: (CLK8)
* PDPAR[3] = 1 [0x1000] -> GPIO: (CLK7)
*/
setbits_be16(&iop->iop_pdpar, 0x1572);
/*
* PEPAR[27] = 1 [0x00000010] -> GPIO: (R2_RXER)
* PEPAR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV)
* PEPAR[25] = 1 [0x00000040] -> GPIO: (RXD4)
* PEPAR[24] = 1 [0x00000080] -> GPIO: (BRG01)
* PEPAR[23] = 1 [0x00000100] -> GPIO: (L1ST1)
* PEPAR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1)
* PEPAR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0)
* PEPAR[20] = 1 [0x00000800] -> GPIO: (SMTXD2)
* PEPAR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
* PEPAR[17] = 1 [0x00004000] -> GPIO: (CLK5)
* PEPAR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK)
* PEPAR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
* PEPAR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
*/
setbits_be32(&cp->cp_pepar, 0x0003DFF0);
/*
* PADIR[9] = 1 [0x0040] -> GPIO: (TDM1O)
* PADIR[8] = 1 [0x0080] -> GPIO: (TDM1I)
* PADIR[5] = 0 [0x0400] -> GPIO: ()
*/
clrsetbits_be16(&iop->iop_padir, 0x04C0, 0x00C0);
/*
* PCDIR[15] = 1 [0x0001] -> GPIO: (WP_EEPROM2)
* PCDIR[14] = 1 [0x0002] -> GPIO: (L1ST2)
* PCDIR[13] = 0 [0x0004] -> GPIO: ()
* PCDIR[12] = 1 [0x0008] -> GPIO: (CS_EEPROM2)
* PCDIR[8] = 1 [0x0080] -> GPIO: (CS_CODEC_2)
* PCDIR[4] = 1 [0x0800] -> GPIO: (CS_CODEC_1)
*/
clrsetbits_be16(&iop->iop_pcdir, 0x088F, 0x088B);
/*
* PDDIR[9] = 1 [0x0040] -> GPIO: (TXD4)
* PDDIR[6] = 1 [0x0200] -> GPIO: (CS_CODEC_3)
*/
setbits_be16(&iop->iop_pddir, 0x0240);
/*
* PEDIR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE)
* PEDIR[27] = 1 [0x00000010] -> GPIO: (R2_RXER)
* PEDIR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV)
* PEDIR[23] = 1 [0x00000100] -> GPIO: (L1ST1)
* PEDIR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1)
* PEDIR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0)
* PEDIR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
* PEDIR[18] = 1 [0x00002000] -> GPIO: (PE18)
* PEDIR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK)
* PEDIR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
* PEDIR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
*/
setbits_be32(&cp->cp_pedir, 0x0003B732);
/*
* PAODR[10] = 1 [0x0020] -> GPIO: (INIT_FPGA_F)
*/
setbits_be16(&iop->iop_paodr, 0x0020);
/*
* PEODR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE)
* PEODR[18] = 0 [0x00002000] -> GPIO: (PE18)
*/
clrsetbits_be32(&cp->cp_peodr, 0x00002002, 0x00000002);
/*
* PESO[24] = 1 [0x00000080] -> GPIO: (BRG01)
* PESO[23] = 1 [0x00000100] -> GPIO: (L1ST1)
* PESO[20] = 1 [0x00000800] -> GPIO: (SMTXD2)
* PESO[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
* PESO[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
* PESO[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
*/
setbits_be32(&cp->cp_peso, 0x00031980);
}
/* Specific board initialization */
int board_early_init_f(void)
{
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
iop8xx_t __iomem *iop = &immr->im_ioport;
cpm8xx_t __iomem *cp = &immr->im_cpm;
/* MPC885 Port settings common to all boards */
setbits_be16(&iop->iop_padat, 0x0000);
/* Port A (MPC885 reference manual - 34.2) */
/*
* In/Out or per. Function 0/1
* PADIR[15] = 0 [0x0001] -> GPIO: (USB_RXD)
* PADIR[14] = 0 [0x0002] -> GPIO: (USB_OE)
* PADIR[13] = 0 [0x0004] -> GPIO: ()
* PADIR[12] = 0 [0x0008] -> GPIO: ()
* PADIR[11] = 1 [0x0010] -> GPIO: (R1_TXD0)
* PADIR[10] = 0 [0x0020] -> GPIO: ()
* PADIR[7] = 0 [0x0100] -> GPIO: ()
* PADIR[6] = 0 [0x0200] -> GPIO: ()
* PADIR[4] = 1 [0x0800] -> GPIO: (R1_TXD1)
* PADIR[3] = 0 [0x1000] -> GPIO: (R1_RXER)
* PADIR[2] = 0 [0x2000] -> GPIO: (R1_CRS_DV)
* PADIR[1] = 0 [0x4000] -> GPIO: (R1_RXD0)
* PADIR[0] = 0 [0x8000] -> GPIO: (R1_RXD1)
*/
clrsetbits_be16(&iop->iop_padir, 0xFB3F, 0x0810);
/*
* Open drain or active output
* PAODR[15] = x [0x0001]
* PAODR[14] = 0 [0x0002]
* PAODR[13] = x [0x0004]
* PAODR[12] = 0 [0x0008]
* PAODR[11] = 0 [0x0010]
* PAODR[9] = 0 [0x0040]
* PAODR[8] = 0 [0x0080]
* PAODR[7] = 0 [0x0100]
*/
clrbits_be16(&iop->iop_paodr, 0x01DF);
/*
* GPIO or per. Function
* PAPAR[15] = 1 [0x0001] -> GPIO: (USB_RXD)
* PAPAR[14] = 1 [0x0002] -> GPIO: (USB_OE)
* PAPAR[11] = 1 [0x0010] -> GPIO: (R1_TXD0)
* PAPAR[10] = 0 [0x0020] -> GPIO: (INIT_FPGA_F)
* PAPAR[5] = 0 [0x0400] -> GPIO: ()
* PAPAR[4] = 1 [0x0800] -> GPIO: (R1_TXD1)
* PAPAR[3] = 1 [0x1000] -> GPIO: (R1_RXER)
* PAPAR[2] = 1 [0x2000] -> GPIO: (R1_CRS_DV)
* PAPAR[1] = 1 [0x4000] -> GPIO: (R1_RXD0)
* PAPAR[0] = 1 [0x8000] -> GPIO: (R1_RXD1)
*/
clrsetbits_be16(&iop->iop_papar, 0xFC33, 0xF813);
/* Port B (MPC885 reference manual - 34.3) */
/*
* In/Out or per. Function 0/1
* PBDIR[31] = 0 [0x00000001] -> GPIO: (R1_REF_CLK)
* PBDIR[30] = 1 [0x00000002] -> GPIO: (CLK)
* PBDIR[29] = 1 [0x00000004] -> GPIO: (MOSI)
* PBDIR[28] = 1 [0x00000008] -> GPIO: (MISO)
* PBDIR[25] = 0 [0x00000040] -> GPIO: (SMTXD1)
* PBDIR[24] = 0 [0x00000080] -> GPIO: (SMRXD1)
* PBDIR[22] = 0 [0x00000200] -> GPIO: (INIT_FPGA_MEZZ)
* PBDIR[21] = 1 [0x00000400] -> GPIO: (CS_EEPROM)
* PBDIR[20] = 0 [0x00000800] -> GPIO: (SMRXD2)
* PBDIR[19] = 1 [0x00001000] -> GPIO: (WR_TEMP)
* PBDIR[17] = 0 [0x00004000] -> GPIO: (DONE_FPGA_MEZZ)
*/
clrsetbits_be32(&cp->cp_pbdir, 0x00005ECF, 0x0000140E);
/*
* Open drain or active output
* PBODR[31] = 0 [0x00000001] -> GPIO: (R1_REF_CLK)
* PBODR[30] = 0 [0x00000002] -> GPIO: (CLK)
* PBODR[29] = 0 [0x00000004] -> GPIO: (MOSI)
* PBODR[28] = 0 [0x00000008] -> GPIO: (MISO)
* PBODR[27] = 0 [0x00000010] -> GPIO: (WR_TEMP2)
* PBODR[26] = 0 [0x00000020] -> GPIO: (BRG02)
* PBODR[25] = 0 [0x00000040] -> GPIO: (SMTXD1)
* PBODR[24] = 0 [0x00000080] -> GPIO: (SMRXD1)
* PBODR[23] = 0 [0x00000100] -> GPIO: (CS_TEMP2)
* PBODR[22] = 0 [0x00000200] -> GPIO: (INIT_FPGA_MEZZ)
* PBODR[21] = 0 [0x00000400] -> GPIO: (CS_EEPROM)
* PBODR[20] = 0 [0x00000800] -> GPIO: (SMRXD2)
* PBODR[19] = 0 [0x00001000] -> GPIO: (WR_TEMP)
* PBODR[18] = 0 [0x00002000] -> GPIO: (RTS2)
* PBODR[17] = 0 [0x00004000] -> GPIO: (DONE_FPGA_MEZZ)
*/
clrbits_be16(&cp->cp_pbodr, 0x00007FFF);
/*
* GPIO or per. Function
* PBPAR[31] = 1 [0x00000001] -> GPIO: (R1_REF_CLK)
* PBPAR[30] = 1 [0x00000002] -> GPIO: (CLK)
* PBPAR[29] = 1 [0x00000004] -> GPIO: (MOSI)
* PBPAR[28] = 1 [0x00000008] -> GPIO: (MISO)
* PBPAR[27] = 0 [0x00000010] -> GPIO: (WR_TEMP2)
* PBPAR[26] = 0 [0x00000020] -> GPIO: (BRG02)
* PBPAR[25] = 1 [0x00000040] -> GPIO: (SMTXD1)
* PBPAR[24] = 1 [0x00000080] -> GPIO: (SMRXD1)
* PBPAR[23] = 0 [0x00000100] -> GPIO: (CS_TEMP2)
* PBPAR[22] = 0 [0x00000200] -> GPIO: (INIT_FPGA_MEZZ)
* PBPAR[21] = 0 [0x00000400] -> GPIO: (CS_EEPROM)
* PBPAR[19] = 0 [0x00001000] -> GPIO: (WR_TEMP)
* PBPAR[18] = 0 [0x00002000] -> GPIO: (RTS2)
* PBPAR[15] = 0 [0x00010000] -> GPIO: (BRG03)
* PBPAR[14] = 0 [0x00020000] -> GPIO: (CS_TEMP)
*/
clrsetbits_be32(&cp->cp_pbpar, 0x000337FF, 0x000000CF);
/* Port C (MPC885 Reference Manual - 34.4) */
/*
* In/Out or per. Function 0/1
* PCDIR[11] = 0 [0x0010] -> GPIO: (USB_RXP)
* PCDIR[10] = 0 [0x0020] -> GPIO: (USB_RXN)
* PCDIR[9] = 0 [0x0040] -> GPIO: (CTS2)
* PCDIR[7] = 1 [0x0100] -> GPIO: (USB_TXP)
* PCDIR[6] = 1 [0x0200] -> GPIO: (USB_TXN)
* PCDIR[5] = 0 [0x0400] -> GPIO: (CTS3)
*/
clrsetbits_be16(&iop->iop_pcdir, 0x0770, 0x0300);
/*
* GPIO or per. Function
* PCPAR[15] = 0 [0x0001] -> GPIO: (WP_EEPROM2)
* PCPAR[13] = 0 [0x0004] -> GPIO: (CS_POT1)
* PCPAR[12] = 0 [0x0008] -> GPIO: (CS_EEPROM2)
* PCPAR[11] = 0 [0x0010] -> GPIO: (USB_RXP)
* PCPAR[10] = 0 [0x0020] -> GPIO: (USB_RXN)
* PCPAR[9] = 0 [0x0040] -> GPIO: (CTS2)
* PCPAR[8] = 0 [0x0080] -> GPIO: (CS_CODEC_FAV)
* PCPAR[7] = 1 [0x0100] -> GPIO: (USB_TXP)
* PCPAR[6] = 1 [0x0200] -> GPIO: (USB_TXN)
* PCPAR[5] = 0 [0x0400] -> GPIO: (CTS3)
* PCPAR[4] = 0 [0x0800] -> GPIO: (CS_CODEC_RADIO)
*/
clrsetbits_be16(&iop->iop_pcpar, 0x0FFD, 0x0300);
/*
* Special Option register
* PCSO[15] = 0 [0x0001] -> GPIO: (WP_EEPROM2)
* PCSO[14] = 0 [0x0002] -> GPIO: (CS_POT2)
* PCSO[13] = x [0x0004] -> Reserved
* PCSO[12] = x [0x0008] -> Reserved
* PCSO[11] = 1 [0x0010] -> GPIO: (USB_RXP)
* PCSO[10] = 1 [0x0020] -> GPIO: (USB_RXN)
* PCSO[9] = 1 [0x0040] -> GPIO: (CTS2)
* PCSO[8] = 0 [0x0080] -> GPIO: (CS_CODEC_FAV)
* PCSO[7] = 0 [0x0100] -> GPIO: (USB_TXP)
* PCSO[6] = 0 [0x0200] -> GPIO: (USB_TXN)
* PCSO[5] = 1 [0x0400] -> GPIO: (CTS3)
* PCSO[4] = 0 [0x0800] -> GPIO: (CS_CODEC_RADIO)
*/
clrsetbits_be16(&iop->iop_pcso, 0x0FF3, 0x0470);
/*
* Interrupt or IO
* PCINT[15] = 0 [0x0001] -> GPIO: ()
* PCINT[14] = 0 [0x0002] -> GPIO: ()
* PCINT[13] = 0 [0x0004] -> GPIO: ()
* PCINT[12] = 0 [0x0008] -> GPIO: ()
* PCINT[11] = 0 [0x0010] -> GPIO: (USB_RXP)
* PCINT[10] = 0 [0x0020] -> GPIO: (USB_RXN)
* PCINT[9] = 0 [0x0040] -> GPIO: ()
* PCINT[8] = 0 [0x0080] -> GPIO: ()
* PCINT[7] = 0 [0x0100] -> GPIO: (USB_TXP)
* PCINT[6] = 0 [0x0200] -> GPIO: (USB_TXN)
* PCINT[5] = 0 [0x0400] -> GPIO: ()
* PCINT[4] = 0 [0x0800] -> GPIO: ()
*/
clrbits_be16(&iop->iop_pcint, 0x0FFF);
/* Port D (MPC885 Reference Manual - 34.5) */
/*
* In/Out or per. Function 0/1
* PDDIR[15] = 1 [0x0001] -> GPIO: (CS_NAND)
* PDDIR[14] = 0 [0x0002] -> GPIO: (TDM_FS_MPC)
* PDDIR[13] = 1 [0x0004] -> GPIO: (ALE_NAND)
* PDDIR[12] = 1 [0x0008] -> GPIO: (CLE_NAND)
* PDDIR[11] = 0 [0x0010] -> GPIO: (RXD3)
* PDDIR[10] = 0 [0x0020] -> GPIO: (TXD3)
* PDDIR[9] = 1 [0x0040] -> GPIO: (TXD4)
* PDDIR[8] = 0 [0x0080] -> GPIO: (R_MDC)
* PDDIR[7] = 0 [0x0100] -> GPIO: (RTS3)
* PDDIR[5] = 0 [0x0400] -> GPIO: (CLK8)
* PDDIR[4] = 0 [0x0800] -> GPIO: (CLK4)
* PDDIR[3] = 0 [0x1000] -> GPIO: (CLK7)
*/
clrsetbits_be16(&iop->iop_pddir, 0x1DFF, 0x004D);
/*
* GPIO or per. Function
* PDPAR[15] = 0 [0x0001] -> GPIO: (CS_NAND)
* PDPAR[13] = 0 [0x0004] -> GPIO: (ALE_NAND)
* PDPAR[12] = 0 [0x0008] -> GPIO: (CLE_NAND)
* PDPAR[8] = 1 [0x0080] -> GPIO: (R_MDC)
* PDPAR[6] = 0 [0x0200] -> GPIO: (INIT_FPGA_RADIO)
* PDPAR[4] = 1 [0x0800] -> GPIO: (CLK4)
*/
clrsetbits_be16(&iop->iop_pdpar, 0x0A8D, 0x0880);
/* Port E (MPC885 Reference Manual - 34.6) */
/*
* In/Out or per. Function 0/1
* PEDIR[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
* PEDIR[29] = 1 [0x00000004] -> GPIO: (USB_SPEED)
* PEDIR[28] = 1 [0x00000008] -> GPIO: (USB_SUSPEND)
* PEDIR[25] = 0 [0x00000040] -> GPIO: (RXD4)
* PEDIR[24] = 0 [0x00000080] -> GPIO: (BRG01)
* PEDIR[20] = 0 [0x00000800] -> GPIO: (SMTXD2)
* PEDIR[17] = 0 [0x00004000] -> GPIO: (CLK5)
*/
clrsetbits_be32(&cp->cp_pedir, 0x000048CD, 0x0000000C);
/*
* open drain or active output
* PEODR[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
* PEODR[29] = 0 [0x00000004] -> GPIO: (USB_SPEED)
* PEODR[28] = 1 [0x00000008] -> GPIO: (USB_SUSPEND)
* PEODR[27] = 0 [0x00000010] -> GPIO: (R2_RXER)
* PEODR[26] = 0 [0x00000020] -> GPIO: (R2_CRS_DV)
* PEODR[25] = 0 [0x00000040] -> GPIO: (RXD4)
* PEODR[24] = 0 [0x00000080] -> GPIO: (BRG01)
* PEODR[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
* PEODR[22] = 0 [0x00000200] -> GPIO: (R2_RXD1)
* PEODR[21] = 0 [0x00000400] -> GPIO: (R2_RXD0)
* PEODR[20] = 0 [0x00000800] -> GPIO: (SMTXD2)
* PEODR[19] = 0 [0x00001000] -> GPIO: (R2_TXEN)
* PEODR[17] = 0 [0x00004000] -> GPIO: (CLK5)
* PEODR[16] = 0 [0x00008000] -> GPIO: (R2_REF_CLK)
*/
clrsetbits_be32(&cp->cp_peodr, 0x0000DFFD, 0x00000008);
/*
* GPIO or per. Function
* PEPAR[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
* PEPAR[30] = 0 [0x00000002] -> GPIO: (PROG_FPGA_FIRMWARE)
* PEPAR[29] = 0 [0x00000004] -> GPIO: (USB_SPEED)
* PEPAR[28] = 0 [0x00000008] -> GPIO: (USB_SUSPEND)
* PEPAR[18] = 0 [0x00002000] -> GPIO: (PROG_FPGA_RADIO)
*/
clrbits_be32(&cp->cp_pepar, 0x0000200F);
/*
* Special Option register
* PESO[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
* PESO[30] = 0 [0x00000002] -> GPIO: (PROG_FPGA_FIRMWARE)
* PESO[29] = 0 [0x00000004] -> GPIO: (USB_SPEED)
* PESO[28] = 0 [0x00000008] -> GPIO: (USB_SUSPEND)
* PESO[27] = 0 [0x00000010] -> GPIO: (R2_RXER)
* PESO[26] = 0 [0x00000020] -> GPIO: (R2_CRS_DV)
* PESO[25] = 0 [0x00000040] -> GPIO: (RXD4)
* PESO[22] = 0 [0x00000200] -> GPIO: (R2_RXD1)
* PESO[21] = 0 [0x00000400] -> GPIO: (R2_RXD0)
* PESO[18] = 0 [0x00002000] -> GPIO: (PROG_FPGA_RADIO)
* PESO[17] = 0 [0x00004000] -> GPIO: (CLK5)
* PESO[16] = 0 [0x00008000] -> GPIO: (R2_REF_CLK)
*/
clrbits_be32(&cp->cp_peso, 0x0000E67F);
/* Is a motherboard present ? */
if (in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE) {
/* Initialize signal PROG_FPGA_FIRMWARE */
out_be32(&cp->cp_pedat, 0x00000002);
out_be32(&cp->cp_peodr, 0x00000002);
out_be32(&cp->cp_pedir, 0x00000002);
/* Check if fpga firmware is loaded */
if (!(in_be32(&cp->cp_pedat) & 0x00000001)) {
/* Load fpga firmware */
/* Activate PROG_FPGA_FIRMWARE for 1 usec */
clrbits_be32(&cp->cp_pedat, 0x00000002);
udelay(1);
setbits_be32(&cp->cp_pedat, 0x00000002);
/* Wait 200 msec and check DONE_FPGA_FIRMWARE */
mdelay(200);
if (!(in_be32(&cp->cp_pedat) & 0x00000001))
hang();
/* Send a reset signal and wait for 20 msec */
clrbits_be16(ADDR_CPLD_R_RESET, R_RST_STATUS);
mdelay(20);
setbits_be16(ADDR_CPLD_R_RESET, R_RST_STATUS);
}
/* Wait 300 msec and check the reset state */
mdelay(300);
if (!(in_be16(ADDR_CPLD_R_RESET) & R_RESET_STATUS))
hang();
iop_setup_common();
} else {
iop_setup_cmpc885();
}
return 0;
}
Reference in New Issue View Git Blame Copy Permalink