mirror of
https://github.com/smaeul/u-boot.git
synced 2025-10-31 12:08:19 +00:00
5dad97ed61
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> (Use 'Link' as the name for the Chromebook Pixel consistently) Change-Id: I158c88653978ff212334f6d4ffeaf49fa81baefe
127 lines
4.2 KiB
Plaintext
127 lines
4.2 KiB
Plaintext
#
|
|
# Copyright (C) 2014, Simon Glass <sjg@chromium.org>
|
|
# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
|
|
#
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
|
|
U-Boot on x86
|
|
=============
|
|
|
|
This document describes the information about U-Boot running on x86 targets,
|
|
including supported boards, build instructions, todo list, etc.
|
|
|
|
Status
|
|
------
|
|
U-Boot supports running as a coreboot [1] payload on x86. So far only Link
|
|
(Chromebook Pixel) has been tested, but it should work with minimal adjustments
|
|
on other x86 boards since coreboot deals with most of the low-level details.
|
|
|
|
U-Boot also supports booting directly from x86 reset vector without coreboot,
|
|
aka raw support or bare support. Currently Link and Intel Crown Bay board
|
|
support running U-Boot 'bare metal'.
|
|
|
|
As for loading OS, U-Boot supports directly booting a 32-bit or 64-bit Linux
|
|
kernel as part of a FIT image. It also supports a compressed zImage.
|
|
|
|
Build Instructions
|
|
------------------
|
|
Building U-Boot as a coreboot payload is just like building U-Boot for targets
|
|
on other architectures, like below:
|
|
|
|
$ make coreboot-x86_defconfig
|
|
$ make all
|
|
|
|
Building ROM version of U-Boot (hereafter referred to as u-boot.rom) is a
|
|
little bit tricky, as generally it requires several binary blobs which are not
|
|
shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build is
|
|
not turned on by default in the U-Boot source tree. Firstly, you need turn it
|
|
on by uncommenting the following line in the main U-Boot Makefile:
|
|
|
|
# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
|
|
|
|
Link-specific instructions:
|
|
|
|
First, you need the following binary blobs:
|
|
|
|
* descriptor.bin - Intel flash descriptor
|
|
* me.bin - Intel Management Engine
|
|
* mrc.bin - Memory Reference Code, which sets up SDRAM
|
|
* video ROM - sets up the display
|
|
|
|
You can get these binary blobs by:
|
|
|
|
$ git clone http://review.coreboot.org/p/blobs.git
|
|
$ cd blobs
|
|
|
|
Find the following files:
|
|
|
|
* ./mainboard/google/link/descriptor.bin
|
|
* ./mainboard/google/link/me.bin
|
|
* ./northbridge/intel/sandybridge/systemagent-ivybridge.bin
|
|
|
|
The 3rd one should be renamed to mrc.bin.
|
|
As for the video ROM, you can get it here [2].
|
|
Make sure all these binary blobs are put in the board directory.
|
|
|
|
Now you can build U-Boot and obtain u-boot.rom:
|
|
|
|
$ make chromebook_link_defconfig
|
|
$ make all
|
|
|
|
Intel Crown Bay specific instructions:
|
|
|
|
U-Boot support of Intel Crown Bay board [3] relies on a binary blob called
|
|
Firmware Support Package [4] to perform all the necessary initialization steps
|
|
as documented in the BIOS Writer Guide, including initialization of the CPU,
|
|
memory controller, chipset and certain bus interfaces.
|
|
|
|
Download the Intel FSP for Atom E6xx series and Platform Controller Hub EG20T,
|
|
install it on your host and locate the FSP binary blob. Note this platform
|
|
also requires a Chipset Micro Code (CMC) state machine binary to be present in
|
|
the SPI flash where u-boot.rom resides, and this CMC binary blob can be found
|
|
in this FSP package too.
|
|
|
|
* ./FSP/QUEENSBAY_FSP_GOLD_001_20-DECEMBER-2013.fd
|
|
* ./Microcode/C0_22211.BIN
|
|
|
|
Rename the first one to fsp.bin and second one to cmc.bin and put them in the
|
|
board directory.
|
|
|
|
Now you can build U-Boot and obtaim u-boot.rom
|
|
|
|
$ make crownbay_defconfig
|
|
$ make all
|
|
|
|
CPU Microcode
|
|
-------------
|
|
Modern CPU usually requires a special bit stream called microcode [5] to be
|
|
loaded on the processor after power up in order to function properly. U-Boot
|
|
has already integrated these as hex dumps in the source tree.
|
|
|
|
Driver Model
|
|
------------
|
|
x86 has been converted to use driver model for serial and GPIO.
|
|
|
|
Device Tree
|
|
-----------
|
|
x86 uses device tree to configure the board thus requires CONFIG_OF_CONTROL to
|
|
be turned on. Not every device on the board is configured via devie tree, but
|
|
more and more devices will be added as time goes by. Check out the directory
|
|
arch/x86/dts/ for these device tree source files.
|
|
|
|
TODO List
|
|
---------
|
|
- MTRR support (for performance)
|
|
- Audio
|
|
- Chrome OS verified boot
|
|
- SMI and ACPI support, to provide platform info and facilities to Linux
|
|
|
|
References
|
|
----------
|
|
[1] http://www.coreboot.org
|
|
[2] http://www.coreboot.org/~stepan/pci8086,0166.rom
|
|
[3] http://www.intel.com/content/www/us/en/embedded/design-tools/evaluation-platforms/atom-e660-eg20t-development-kit.html
|
|
[4] http://www.intel.com/fsp
|
|
[5] http://en.wikipedia.org/wiki/Microcode
|