mirror of
				https://github.com/smaeul/u-boot.git
				synced 2025-11-03 21:48:15 +00:00 
			
		
		
		
	After upgrading to GCC 7.1, the duplicate const specifies in the
r8152 driver trigger the following build warnings with buildman
(observed on a 'buildman rockchip' test)::
  ../drivers/usb/eth/r8152.c:62:35: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier]
   static const struct r8152_version const r8152_versions[] = {
                                     ^~~~~
This commit fixes these by removing the duplicate 'const' specifier
from the declarations.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
		
	
			
		
			
				
	
	
		
			1660 lines
		
	
	
		
			39 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1660 lines
		
	
	
		
			39 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Copyright (c) 2015 Realtek Semiconductor Corp. All rights reserved.
 | 
						|
 *
 | 
						|
 * SPDX-License-Identifier:	GPL-2.0
 | 
						|
 *
 | 
						|
 */
 | 
						|
 | 
						|
#include <common.h>
 | 
						|
#include <dm.h>
 | 
						|
#include <errno.h>
 | 
						|
#include <malloc.h>
 | 
						|
#include <memalign.h>
 | 
						|
#include <usb.h>
 | 
						|
#include <usb/lin_gadget_compat.h>
 | 
						|
#include <linux/mii.h>
 | 
						|
#include <linux/bitops.h>
 | 
						|
#include "usb_ether.h"
 | 
						|
#include "r8152.h"
 | 
						|
 | 
						|
#ifndef CONFIG_DM_ETH
 | 
						|
/* local vars */
 | 
						|
static int curr_eth_dev; /* index for name of next device detected */
 | 
						|
 | 
						|
struct r8152_dongle {
 | 
						|
	unsigned short vendor;
 | 
						|
	unsigned short product;
 | 
						|
};
 | 
						|
 | 
						|
static const struct r8152_dongle r8152_dongles[] = {
 | 
						|
	/* Realtek */
 | 
						|
	{ 0x0bda, 0x8050 },
 | 
						|
	{ 0x0bda, 0x8152 },
 | 
						|
	{ 0x0bda, 0x8153 },
 | 
						|
 | 
						|
	/* Samsung */
 | 
						|
	{ 0x04e8, 0xa101 },
 | 
						|
 | 
						|
	/* Lenovo */
 | 
						|
	{ 0x17ef, 0x304f },
 | 
						|
	{ 0x17ef, 0x3052 },
 | 
						|
	{ 0x17ef, 0x3054 },
 | 
						|
	{ 0x17ef, 0x3057 },
 | 
						|
	{ 0x17ef, 0x7205 },
 | 
						|
	{ 0x17ef, 0x720a },
 | 
						|
	{ 0x17ef, 0x720b },
 | 
						|
	{ 0x17ef, 0x720c },
 | 
						|
 | 
						|
	/* TP-LINK */
 | 
						|
	{ 0x2357, 0x0601 },
 | 
						|
 | 
						|
	/* Nvidia */
 | 
						|
	{ 0x0955, 0x09ff },
 | 
						|
};
 | 
						|
#endif
 | 
						|
 | 
						|
struct r8152_version {
 | 
						|
	unsigned short tcr;
 | 
						|
	unsigned short version;
 | 
						|
	bool           gmii;
 | 
						|
};
 | 
						|
 | 
						|
static const struct r8152_version r8152_versions[] = {
 | 
						|
	{ 0x4c00, RTL_VER_01, 0 },
 | 
						|
	{ 0x4c10, RTL_VER_02, 0 },
 | 
						|
	{ 0x5c00, RTL_VER_03, 1 },
 | 
						|
	{ 0x5c10, RTL_VER_04, 1 },
 | 
						|
	{ 0x5c20, RTL_VER_05, 1 },
 | 
						|
	{ 0x5c30, RTL_VER_06, 1 },
 | 
						|
	{ 0x4800, RTL_VER_07, 0 },
 | 
						|
};
 | 
						|
 | 
						|
static
 | 
						|
int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
 | 
						|
{
 | 
						|
	ALLOC_CACHE_ALIGN_BUFFER(void *, tmp, size);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = usb_control_msg(tp->udev, usb_rcvctrlpipe(tp->udev, 0),
 | 
						|
		RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
 | 
						|
		value, index, tmp, size, 500);
 | 
						|
	memcpy(data, tmp, size);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static
 | 
						|
int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
 | 
						|
{
 | 
						|
	ALLOC_CACHE_ALIGN_BUFFER(void *, tmp, size);
 | 
						|
 | 
						|
	memcpy(tmp, data, size);
 | 
						|
	return usb_control_msg(tp->udev, usb_sndctrlpipe(tp->udev, 0),
 | 
						|
			       RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE,
 | 
						|
			       value, index, tmp, size, 500);
 | 
						|
}
 | 
						|
 | 
						|
int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
 | 
						|
		     void *data, u16 type)
 | 
						|
{
 | 
						|
	u16 burst_size = 64;
 | 
						|
	int ret;
 | 
						|
	int txsize;
 | 
						|
 | 
						|
	/* both size and index must be 4 bytes align */
 | 
						|
	if ((size & 3) || !size || (index & 3) || !data)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	if (index + size > 0xffff)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	while (size) {
 | 
						|
		txsize = min(size, burst_size);
 | 
						|
		ret = get_registers(tp, index, type, txsize, data);
 | 
						|
		if (ret < 0)
 | 
						|
			break;
 | 
						|
 | 
						|
		index += txsize;
 | 
						|
		data += txsize;
 | 
						|
		size -= txsize;
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
 | 
						|
		      u16 size, void *data, u16 type)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	u16 byteen_start, byteen_end, byte_en_to_hw;
 | 
						|
	u16 burst_size = 512;
 | 
						|
	int txsize;
 | 
						|
 | 
						|
	/* both size and index must be 4 bytes align */
 | 
						|
	if ((size & 3) || !size || (index & 3) || !data)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	if (index + size > 0xffff)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	byteen_start = byteen & BYTE_EN_START_MASK;
 | 
						|
	byteen_end = byteen & BYTE_EN_END_MASK;
 | 
						|
 | 
						|
	byte_en_to_hw = byteen_start | (byteen_start << 4);
 | 
						|
	ret = set_registers(tp, index, type | byte_en_to_hw, 4, data);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	index += 4;
 | 
						|
	data += 4;
 | 
						|
	size -= 4;
 | 
						|
 | 
						|
	if (size) {
 | 
						|
		size -= 4;
 | 
						|
 | 
						|
		while (size) {
 | 
						|
			txsize = min(size, burst_size);
 | 
						|
 | 
						|
			ret = set_registers(tp, index,
 | 
						|
					    type | BYTE_EN_DWORD,
 | 
						|
					    txsize, data);
 | 
						|
			if (ret < 0)
 | 
						|
				return ret;
 | 
						|
 | 
						|
			index += txsize;
 | 
						|
			data += txsize;
 | 
						|
			size -= txsize;
 | 
						|
		}
 | 
						|
 | 
						|
		byte_en_to_hw = byteen_end | (byteen_end >> 4);
 | 
						|
		ret = set_registers(tp, index, type | byte_en_to_hw, 4, data);
 | 
						|
		if (ret < 0)
 | 
						|
			return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
int pla_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data)
 | 
						|
{
 | 
						|
	return generic_ocp_read(tp, index, size, data, MCU_TYPE_PLA);
 | 
						|
}
 | 
						|
 | 
						|
int pla_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
 | 
						|
{
 | 
						|
	return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_PLA);
 | 
						|
}
 | 
						|
 | 
						|
int usb_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data)
 | 
						|
{
 | 
						|
	return generic_ocp_read(tp, index, size, data, MCU_TYPE_USB);
 | 
						|
}
 | 
						|
 | 
						|
int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
 | 
						|
{
 | 
						|
	return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_USB);
 | 
						|
}
 | 
						|
 | 
						|
u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index)
 | 
						|
{
 | 
						|
	__le32 data;
 | 
						|
 | 
						|
	generic_ocp_read(tp, index, sizeof(data), &data, type);
 | 
						|
 | 
						|
	return __le32_to_cpu(data);
 | 
						|
}
 | 
						|
 | 
						|
void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data)
 | 
						|
{
 | 
						|
	__le32 tmp = __cpu_to_le32(data);
 | 
						|
 | 
						|
	generic_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(tmp), &tmp, type);
 | 
						|
}
 | 
						|
 | 
						|
u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index)
 | 
						|
{
 | 
						|
	u32 data;
 | 
						|
	__le32 tmp;
 | 
						|
	u8 shift = index & 2;
 | 
						|
 | 
						|
	index &= ~3;
 | 
						|
 | 
						|
	generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
 | 
						|
 | 
						|
	data = __le32_to_cpu(tmp);
 | 
						|
	data >>= (shift * 8);
 | 
						|
	data &= 0xffff;
 | 
						|
 | 
						|
	return data;
 | 
						|
}
 | 
						|
 | 
						|
void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data)
 | 
						|
{
 | 
						|
	u32 mask = 0xffff;
 | 
						|
	__le32 tmp;
 | 
						|
	u16 byen = BYTE_EN_WORD;
 | 
						|
	u8 shift = index & 2;
 | 
						|
 | 
						|
	data &= mask;
 | 
						|
 | 
						|
	if (index & 2) {
 | 
						|
		byen <<= shift;
 | 
						|
		mask <<= (shift * 8);
 | 
						|
		data <<= (shift * 8);
 | 
						|
		index &= ~3;
 | 
						|
	}
 | 
						|
 | 
						|
	tmp = __cpu_to_le32(data);
 | 
						|
 | 
						|
	generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
 | 
						|
}
 | 
						|
 | 
						|
u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index)
 | 
						|
{
 | 
						|
	u32 data;
 | 
						|
	__le32 tmp;
 | 
						|
	u8 shift = index & 3;
 | 
						|
 | 
						|
	index &= ~3;
 | 
						|
 | 
						|
	generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
 | 
						|
 | 
						|
	data = __le32_to_cpu(tmp);
 | 
						|
	data >>= (shift * 8);
 | 
						|
	data &= 0xff;
 | 
						|
 | 
						|
	return data;
 | 
						|
}
 | 
						|
 | 
						|
void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data)
 | 
						|
{
 | 
						|
	u32 mask = 0xff;
 | 
						|
	__le32 tmp;
 | 
						|
	u16 byen = BYTE_EN_BYTE;
 | 
						|
	u8 shift = index & 3;
 | 
						|
 | 
						|
	data &= mask;
 | 
						|
 | 
						|
	if (index & 3) {
 | 
						|
		byen <<= shift;
 | 
						|
		mask <<= (shift * 8);
 | 
						|
		data <<= (shift * 8);
 | 
						|
		index &= ~3;
 | 
						|
	}
 | 
						|
 | 
						|
	tmp = __cpu_to_le32(data);
 | 
						|
 | 
						|
	generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
 | 
						|
}
 | 
						|
 | 
						|
u16 ocp_reg_read(struct r8152 *tp, u16 addr)
 | 
						|
{
 | 
						|
	u16 ocp_base, ocp_index;
 | 
						|
 | 
						|
	ocp_base = addr & 0xf000;
 | 
						|
	if (ocp_base != tp->ocp_base) {
 | 
						|
		ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
 | 
						|
		tp->ocp_base = ocp_base;
 | 
						|
	}
 | 
						|
 | 
						|
	ocp_index = (addr & 0x0fff) | 0xb000;
 | 
						|
	return ocp_read_word(tp, MCU_TYPE_PLA, ocp_index);
 | 
						|
}
 | 
						|
 | 
						|
void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)
 | 
						|
{
 | 
						|
	u16 ocp_base, ocp_index;
 | 
						|
 | 
						|
	ocp_base = addr & 0xf000;
 | 
						|
	if (ocp_base != tp->ocp_base) {
 | 
						|
		ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
 | 
						|
		tp->ocp_base = ocp_base;
 | 
						|
	}
 | 
						|
 | 
						|
	ocp_index = (addr & 0x0fff) | 0xb000;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data);
 | 
						|
}
 | 
						|
 | 
						|
static void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value)
 | 
						|
{
 | 
						|
	ocp_reg_write(tp, OCP_BASE_MII + reg_addr * 2, value);
 | 
						|
}
 | 
						|
 | 
						|
static int r8152_mdio_read(struct r8152 *tp, u32 reg_addr)
 | 
						|
{
 | 
						|
	return ocp_reg_read(tp, OCP_BASE_MII + reg_addr * 2);
 | 
						|
}
 | 
						|
 | 
						|
void sram_write(struct r8152 *tp, u16 addr, u16 data)
 | 
						|
{
 | 
						|
	ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
 | 
						|
	ocp_reg_write(tp, OCP_SRAM_DATA, data);
 | 
						|
}
 | 
						|
 | 
						|
int r8152_wait_for_bit(struct r8152 *tp, bool ocp_reg, u16 type, u16 index,
 | 
						|
		       const u32 mask, bool set, unsigned int timeout)
 | 
						|
{
 | 
						|
	u32 val;
 | 
						|
 | 
						|
	while (--timeout) {
 | 
						|
		if (ocp_reg)
 | 
						|
			val = ocp_reg_read(tp, index);
 | 
						|
		else
 | 
						|
			val = ocp_read_dword(tp, type, index);
 | 
						|
 | 
						|
		if (!set)
 | 
						|
			val = ~val;
 | 
						|
 | 
						|
		if ((val & mask) == mask)
 | 
						|
			return 0;
 | 
						|
 | 
						|
		mdelay(1);
 | 
						|
	}
 | 
						|
 | 
						|
	debug("%s: Timeout (index=%04x mask=%08x timeout=%d)\n",
 | 
						|
	      __func__, index, mask, timeout);
 | 
						|
 | 
						|
	return -ETIMEDOUT;
 | 
						|
}
 | 
						|
 | 
						|
static void r8152b_reset_packet_filter(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC);
 | 
						|
	ocp_data &= ~FMC_FCR_MCU_EN;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
 | 
						|
	ocp_data |= FMC_FCR_MCU_EN;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static void rtl8152_wait_fifo_empty(struct r8152 *tp)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = r8152_wait_for_bit(tp, 0, MCU_TYPE_PLA, PLA_PHY_PWR,
 | 
						|
				 PLA_PHY_PWR_TXEMP, 1, R8152_WAIT_TIMEOUT);
 | 
						|
	if (ret)
 | 
						|
		debug("Timeout waiting for FIFO empty\n");
 | 
						|
 | 
						|
	ret = r8152_wait_for_bit(tp, 0, MCU_TYPE_PLA, PLA_TCR0,
 | 
						|
				 TCR0_TX_EMPTY, 1, R8152_WAIT_TIMEOUT);
 | 
						|
	if (ret)
 | 
						|
		debug("Timeout waiting for TX empty\n");
 | 
						|
}
 | 
						|
 | 
						|
static void rtl8152_nic_reset(struct r8152 *tp)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, BIST_CTRL);
 | 
						|
	ocp_data |= BIST_CTRL_SW_RESET;
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, BIST_CTRL, ocp_data);
 | 
						|
 | 
						|
	ret = r8152_wait_for_bit(tp, 0, MCU_TYPE_PLA, BIST_CTRL,
 | 
						|
				 BIST_CTRL_SW_RESET, 0, R8152_WAIT_TIMEOUT);
 | 
						|
	if (ret)
 | 
						|
		debug("Timeout waiting for NIC reset\n");
 | 
						|
}
 | 
						|
 | 
						|
static u8 rtl8152_get_speed(struct r8152 *tp)
 | 
						|
{
 | 
						|
	return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
 | 
						|
}
 | 
						|
 | 
						|
static void rtl_set_eee_plus(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
 | 
						|
	ocp_data &= ~EEEP_CR_EEEP_TX;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static void rxdy_gated_en(struct r8152 *tp, bool enable)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
 | 
						|
	if (enable)
 | 
						|
		ocp_data |= RXDY_GATED_EN;
 | 
						|
	else
 | 
						|
		ocp_data &= ~RXDY_GATED_EN;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static void rtl8152_set_rx_mode(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
	__le32 tmp[2];
 | 
						|
 | 
						|
	tmp[0] = 0xffffffff;
 | 
						|
	tmp[1] = 0xffffffff;
 | 
						|
 | 
						|
	pla_ocp_write(tp, PLA_MAR, BYTE_EN_DWORD, sizeof(tmp), tmp);
 | 
						|
 | 
						|
	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
 | 
						|
	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static int rtl_enable(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	r8152b_reset_packet_filter(tp);
 | 
						|
 | 
						|
	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
 | 
						|
	ocp_data |= PLA_CR_RE | PLA_CR_TE;
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
 | 
						|
 | 
						|
	rxdy_gated_en(tp, false);
 | 
						|
 | 
						|
	rtl8152_set_rx_mode(tp);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int rtl8152_enable(struct r8152 *tp)
 | 
						|
{
 | 
						|
	rtl_set_eee_plus(tp);
 | 
						|
 | 
						|
	return rtl_enable(tp);
 | 
						|
}
 | 
						|
 | 
						|
static void r8153_set_rx_early_timeout(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data = tp->coalesce / 8;
 | 
						|
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static void r8153_set_rx_early_size(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data = (RTL8152_AGG_BUF_SZ - RTL8153_RMS) / 4;
 | 
						|
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static int rtl8153_enable(struct r8152 *tp)
 | 
						|
{
 | 
						|
	rtl_set_eee_plus(tp);
 | 
						|
	r8153_set_rx_early_timeout(tp);
 | 
						|
	r8153_set_rx_early_size(tp);
 | 
						|
 | 
						|
	return rtl_enable(tp);
 | 
						|
}
 | 
						|
 | 
						|
static void rtl_disable(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
 | 
						|
	ocp_data &= ~RCR_ACPT_ALL;
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
 | 
						|
 | 
						|
	rxdy_gated_en(tp, true);
 | 
						|
 | 
						|
	rtl8152_wait_fifo_empty(tp);
 | 
						|
	rtl8152_nic_reset(tp);
 | 
						|
}
 | 
						|
 | 
						|
static void r8152_power_cut_en(struct r8152 *tp, bool enable)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
 | 
						|
	if (enable)
 | 
						|
		ocp_data |= POWER_CUT;
 | 
						|
	else
 | 
						|
		ocp_data &= ~POWER_CUT;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
 | 
						|
	ocp_data &= ~RESUME_INDICATE;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static void rtl_rx_vlan_en(struct r8152 *tp, bool enable)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
 | 
						|
	if (enable)
 | 
						|
		ocp_data |= CPCR_RX_VLAN;
 | 
						|
	else
 | 
						|
		ocp_data &= ~CPCR_RX_VLAN;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static void r8153_u1u2en(struct r8152 *tp, bool enable)
 | 
						|
{
 | 
						|
	u8 u1u2[8];
 | 
						|
 | 
						|
	if (enable)
 | 
						|
		memset(u1u2, 0xff, sizeof(u1u2));
 | 
						|
	else
 | 
						|
		memset(u1u2, 0x00, sizeof(u1u2));
 | 
						|
 | 
						|
	usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2);
 | 
						|
}
 | 
						|
 | 
						|
static void r8153_u2p3en(struct r8152 *tp, bool enable)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
 | 
						|
	if (enable && tp->version != RTL_VER_03 && tp->version != RTL_VER_04)
 | 
						|
		ocp_data |= U2P3_ENABLE;
 | 
						|
	else
 | 
						|
		ocp_data &= ~U2P3_ENABLE;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static void r8153_power_cut_en(struct r8152 *tp, bool enable)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
 | 
						|
	if (enable)
 | 
						|
		ocp_data |= PWR_EN | PHASE2_EN;
 | 
						|
	else
 | 
						|
		ocp_data &= ~(PWR_EN | PHASE2_EN);
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
 | 
						|
	ocp_data &= ~PCUT_STATUS;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static int r8152_read_mac(struct r8152 *tp, unsigned char *macaddr)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	unsigned char enetaddr[8] = {0};
 | 
						|
 | 
						|
	ret = pla_ocp_read(tp, PLA_IDR, 8, enetaddr);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	memcpy(macaddr, enetaddr, ETH_ALEN);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void r8152b_disable_aldps(struct r8152 *tp)
 | 
						|
{
 | 
						|
	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA | DIS_SDSAVE);
 | 
						|
	mdelay(20);
 | 
						|
}
 | 
						|
 | 
						|
static void r8152b_enable_aldps(struct r8152 *tp)
 | 
						|
{
 | 
						|
	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS |
 | 
						|
		LINKENA | DIS_SDSAVE);
 | 
						|
}
 | 
						|
 | 
						|
static void rtl8152_disable(struct r8152 *tp)
 | 
						|
{
 | 
						|
	r8152b_disable_aldps(tp);
 | 
						|
	rtl_disable(tp);
 | 
						|
	r8152b_enable_aldps(tp);
 | 
						|
}
 | 
						|
 | 
						|
static void r8152b_hw_phy_cfg(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u16 data;
 | 
						|
 | 
						|
	data = r8152_mdio_read(tp, MII_BMCR);
 | 
						|
	if (data & BMCR_PDOWN) {
 | 
						|
		data &= ~BMCR_PDOWN;
 | 
						|
		r8152_mdio_write(tp, MII_BMCR, data);
 | 
						|
	}
 | 
						|
 | 
						|
	r8152b_firmware(tp);
 | 
						|
}
 | 
						|
 | 
						|
static void rtl8152_reinit_ll(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = r8152_wait_for_bit(tp, 0, MCU_TYPE_PLA, PLA_PHY_PWR,
 | 
						|
				 PLA_PHY_PWR_LLR, 1, R8152_WAIT_TIMEOUT);
 | 
						|
	if (ret)
 | 
						|
		debug("Timeout waiting for link list ready\n");
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
 | 
						|
	ocp_data |= RE_INIT_LL;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
 | 
						|
 | 
						|
	ret = r8152_wait_for_bit(tp, 0, MCU_TYPE_PLA, PLA_PHY_PWR,
 | 
						|
				 PLA_PHY_PWR_LLR, 1, R8152_WAIT_TIMEOUT);
 | 
						|
	if (ret)
 | 
						|
		debug("Timeout waiting for link list ready\n");
 | 
						|
}
 | 
						|
 | 
						|
static void r8152b_exit_oob(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
 | 
						|
	ocp_data &= ~RCR_ACPT_ALL;
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
 | 
						|
 | 
						|
	rxdy_gated_en(tp, true);
 | 
						|
	r8152b_hw_phy_cfg(tp);
 | 
						|
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00);
 | 
						|
 | 
						|
	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
 | 
						|
	ocp_data &= ~NOW_IS_OOB;
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
 | 
						|
	ocp_data &= ~MCU_BORW_EN;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
 | 
						|
 | 
						|
	rtl8152_reinit_ll(tp);
 | 
						|
	rtl8152_nic_reset(tp);
 | 
						|
 | 
						|
	/* rx share fifo credit full threshold */
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
 | 
						|
 | 
						|
	if (tp->udev->speed == USB_SPEED_FULL ||
 | 
						|
	    tp->udev->speed == USB_SPEED_LOW) {
 | 
						|
		/* rx share fifo credit near full threshold */
 | 
						|
		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
 | 
						|
				RXFIFO_THR2_FULL);
 | 
						|
		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
 | 
						|
				RXFIFO_THR3_FULL);
 | 
						|
	} else {
 | 
						|
		/* rx share fifo credit near full threshold */
 | 
						|
		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
 | 
						|
				RXFIFO_THR2_HIGH);
 | 
						|
		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
 | 
						|
				RXFIFO_THR3_HIGH);
 | 
						|
	}
 | 
						|
 | 
						|
	/* TX share fifo free credit full threshold */
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL);
 | 
						|
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH);
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_USB, USB_TX_DMA,
 | 
						|
			TEST_MODE_DISABLE | TX_SIZE_ADJUST1);
 | 
						|
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
 | 
						|
	ocp_data |= TCR0_AUTO_FIFO;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static void r8152b_enter_oob(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
 | 
						|
	ocp_data &= ~NOW_IS_OOB;
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
 | 
						|
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB);
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB);
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB);
 | 
						|
 | 
						|
	rtl_disable(tp);
 | 
						|
 | 
						|
	rtl8152_reinit_ll(tp);
 | 
						|
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
 | 
						|
 | 
						|
	rtl_rx_vlan_en(tp, false);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR);
 | 
						|
	ocp_data |= ALDPS_PROXY_MODE;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data);
 | 
						|
 | 
						|
	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
 | 
						|
	ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
 | 
						|
 | 
						|
	rxdy_gated_en(tp, false);
 | 
						|
 | 
						|
	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
 | 
						|
	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static void r8153_hw_phy_cfg(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
	u16 data;
 | 
						|
 | 
						|
	if (tp->version == RTL_VER_03 || tp->version == RTL_VER_04 ||
 | 
						|
	    tp->version == RTL_VER_05)
 | 
						|
		ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L);
 | 
						|
 | 
						|
	data = r8152_mdio_read(tp, MII_BMCR);
 | 
						|
	if (data & BMCR_PDOWN) {
 | 
						|
		data &= ~BMCR_PDOWN;
 | 
						|
		r8152_mdio_write(tp, MII_BMCR, data);
 | 
						|
	}
 | 
						|
 | 
						|
	r8153_firmware(tp);
 | 
						|
 | 
						|
	if (tp->version == RTL_VER_03) {
 | 
						|
		data = ocp_reg_read(tp, OCP_EEE_CFG);
 | 
						|
		data &= ~CTAP_SHORT_EN;
 | 
						|
		ocp_reg_write(tp, OCP_EEE_CFG, data);
 | 
						|
	}
 | 
						|
 | 
						|
	data = ocp_reg_read(tp, OCP_POWER_CFG);
 | 
						|
	data |= EEE_CLKDIV_EN;
 | 
						|
	ocp_reg_write(tp, OCP_POWER_CFG, data);
 | 
						|
 | 
						|
	data = ocp_reg_read(tp, OCP_DOWN_SPEED);
 | 
						|
	data |= EN_10M_BGOFF;
 | 
						|
	ocp_reg_write(tp, OCP_DOWN_SPEED, data);
 | 
						|
	data = ocp_reg_read(tp, OCP_POWER_CFG);
 | 
						|
	data |= EN_10M_PLLOFF;
 | 
						|
	ocp_reg_write(tp, OCP_POWER_CFG, data);
 | 
						|
	sram_write(tp, SRAM_IMPEDANCE, 0x0b13);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
 | 
						|
	ocp_data |= PFM_PWM_SWITCH;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
 | 
						|
 | 
						|
	/* Enable LPF corner auto tune */
 | 
						|
	sram_write(tp, SRAM_LPF_CFG, 0xf70f);
 | 
						|
 | 
						|
	/* Adjust 10M Amplitude */
 | 
						|
	sram_write(tp, SRAM_10M_AMP1, 0x00af);
 | 
						|
	sram_write(tp, SRAM_10M_AMP2, 0x0208);
 | 
						|
}
 | 
						|
 | 
						|
static void r8153_first_init(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	rxdy_gated_en(tp, true);
 | 
						|
 | 
						|
	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
 | 
						|
	ocp_data &= ~RCR_ACPT_ALL;
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
 | 
						|
 | 
						|
	r8153_hw_phy_cfg(tp);
 | 
						|
 | 
						|
	rtl8152_nic_reset(tp);
 | 
						|
 | 
						|
	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
 | 
						|
	ocp_data &= ~NOW_IS_OOB;
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
 | 
						|
	ocp_data &= ~MCU_BORW_EN;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
 | 
						|
 | 
						|
	rtl8152_reinit_ll(tp);
 | 
						|
 | 
						|
	rtl_rx_vlan_en(tp, false);
 | 
						|
 | 
						|
	ocp_data = RTL8153_RMS;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data);
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
 | 
						|
	ocp_data |= TCR0_AUTO_FIFO;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
 | 
						|
 | 
						|
	rtl8152_nic_reset(tp);
 | 
						|
 | 
						|
	/* rx share fifo credit full threshold */
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL);
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL);
 | 
						|
	/* TX share fifo free credit full threshold */
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2);
 | 
						|
 | 
						|
	/* rx aggregation */
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
 | 
						|
 | 
						|
	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static void r8153_enter_oob(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
 | 
						|
	ocp_data &= ~NOW_IS_OOB;
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
 | 
						|
 | 
						|
	rtl_disable(tp);
 | 
						|
 | 
						|
	rtl8152_reinit_ll(tp);
 | 
						|
 | 
						|
	ocp_data = RTL8153_RMS;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
 | 
						|
	ocp_data &= ~TEREDO_WAKE_MASK;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
 | 
						|
 | 
						|
	rtl_rx_vlan_en(tp, false);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR);
 | 
						|
	ocp_data |= ALDPS_PROXY_MODE;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data);
 | 
						|
 | 
						|
	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
 | 
						|
	ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
 | 
						|
 | 
						|
	rxdy_gated_en(tp, false);
 | 
						|
 | 
						|
	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
 | 
						|
	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static void r8153_disable_aldps(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u16 data;
 | 
						|
 | 
						|
	data = ocp_reg_read(tp, OCP_POWER_CFG);
 | 
						|
	data &= ~EN_ALDPS;
 | 
						|
	ocp_reg_write(tp, OCP_POWER_CFG, data);
 | 
						|
	mdelay(20);
 | 
						|
}
 | 
						|
 | 
						|
static void rtl8153_disable(struct r8152 *tp)
 | 
						|
{
 | 
						|
	r8153_disable_aldps(tp);
 | 
						|
	rtl_disable(tp);
 | 
						|
}
 | 
						|
 | 
						|
static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
 | 
						|
{
 | 
						|
	u16 bmcr, anar, gbcr;
 | 
						|
 | 
						|
	anar = r8152_mdio_read(tp, MII_ADVERTISE);
 | 
						|
	anar &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
 | 
						|
		  ADVERTISE_100HALF | ADVERTISE_100FULL);
 | 
						|
	if (tp->supports_gmii) {
 | 
						|
		gbcr = r8152_mdio_read(tp, MII_CTRL1000);
 | 
						|
		gbcr &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
 | 
						|
	} else {
 | 
						|
		gbcr = 0;
 | 
						|
	}
 | 
						|
 | 
						|
	if (autoneg == AUTONEG_DISABLE) {
 | 
						|
		if (speed == SPEED_10) {
 | 
						|
			bmcr = 0;
 | 
						|
			anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
 | 
						|
		} else if (speed == SPEED_100) {
 | 
						|
			bmcr = BMCR_SPEED100;
 | 
						|
			anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
 | 
						|
		} else if (speed == SPEED_1000 && tp->supports_gmii) {
 | 
						|
			bmcr = BMCR_SPEED1000;
 | 
						|
			gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
 | 
						|
		} else {
 | 
						|
			return -EINVAL;
 | 
						|
		}
 | 
						|
 | 
						|
		if (duplex == DUPLEX_FULL)
 | 
						|
			bmcr |= BMCR_FULLDPLX;
 | 
						|
	} else {
 | 
						|
		if (speed == SPEED_10) {
 | 
						|
			if (duplex == DUPLEX_FULL)
 | 
						|
				anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
 | 
						|
			else
 | 
						|
				anar |= ADVERTISE_10HALF;
 | 
						|
		} else if (speed == SPEED_100) {
 | 
						|
			if (duplex == DUPLEX_FULL) {
 | 
						|
				anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
 | 
						|
				anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
 | 
						|
			} else {
 | 
						|
				anar |= ADVERTISE_10HALF;
 | 
						|
				anar |= ADVERTISE_100HALF;
 | 
						|
			}
 | 
						|
		} else if (speed == SPEED_1000 && tp->supports_gmii) {
 | 
						|
			if (duplex == DUPLEX_FULL) {
 | 
						|
				anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
 | 
						|
				anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
 | 
						|
				gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
 | 
						|
			} else {
 | 
						|
				anar |= ADVERTISE_10HALF;
 | 
						|
				anar |= ADVERTISE_100HALF;
 | 
						|
				gbcr |= ADVERTISE_1000HALF;
 | 
						|
			}
 | 
						|
		} else {
 | 
						|
			return -EINVAL;
 | 
						|
		}
 | 
						|
 | 
						|
		bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
 | 
						|
	}
 | 
						|
 | 
						|
	if (tp->supports_gmii)
 | 
						|
		r8152_mdio_write(tp, MII_CTRL1000, gbcr);
 | 
						|
 | 
						|
	r8152_mdio_write(tp, MII_ADVERTISE, anar);
 | 
						|
	r8152_mdio_write(tp, MII_BMCR, bmcr);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void rtl8152_up(struct r8152 *tp)
 | 
						|
{
 | 
						|
	r8152b_disable_aldps(tp);
 | 
						|
	r8152b_exit_oob(tp);
 | 
						|
	r8152b_enable_aldps(tp);
 | 
						|
}
 | 
						|
 | 
						|
static void rtl8152_down(struct r8152 *tp)
 | 
						|
{
 | 
						|
	r8152_power_cut_en(tp, false);
 | 
						|
	r8152b_disable_aldps(tp);
 | 
						|
	r8152b_enter_oob(tp);
 | 
						|
	r8152b_enable_aldps(tp);
 | 
						|
}
 | 
						|
 | 
						|
static void rtl8153_up(struct r8152 *tp)
 | 
						|
{
 | 
						|
	r8153_u1u2en(tp, false);
 | 
						|
	r8153_disable_aldps(tp);
 | 
						|
	r8153_first_init(tp);
 | 
						|
	r8153_u2p3en(tp, false);
 | 
						|
}
 | 
						|
 | 
						|
static void rtl8153_down(struct r8152 *tp)
 | 
						|
{
 | 
						|
	r8153_u1u2en(tp, false);
 | 
						|
	r8153_u2p3en(tp, false);
 | 
						|
	r8153_power_cut_en(tp, false);
 | 
						|
	r8153_disable_aldps(tp);
 | 
						|
	r8153_enter_oob(tp);
 | 
						|
}
 | 
						|
 | 
						|
static void r8152b_get_version(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
	u16 tcr;
 | 
						|
	int i;
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1);
 | 
						|
	tcr = (u16)(ocp_data & VERSION_MASK);
 | 
						|
 | 
						|
	for (i = 0; i < ARRAY_SIZE(r8152_versions); i++) {
 | 
						|
		if (tcr == r8152_versions[i].tcr) {
 | 
						|
			/* Found a supported version */
 | 
						|
			tp->version = r8152_versions[i].version;
 | 
						|
			tp->supports_gmii = r8152_versions[i].gmii;
 | 
						|
			break;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (tp->version == RTL_VER_UNKNOWN)
 | 
						|
		debug("r8152 Unknown tcr version 0x%04x\n", tcr);
 | 
						|
}
 | 
						|
 | 
						|
static void r8152b_enable_fc(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u16 anar;
 | 
						|
	anar = r8152_mdio_read(tp, MII_ADVERTISE);
 | 
						|
	anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
 | 
						|
	r8152_mdio_write(tp, MII_ADVERTISE, anar);
 | 
						|
}
 | 
						|
 | 
						|
static void rtl_tally_reset(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY);
 | 
						|
	ocp_data |= TALLY_RESET;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static void r8152b_init(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	r8152b_disable_aldps(tp);
 | 
						|
 | 
						|
	if (tp->version == RTL_VER_01) {
 | 
						|
		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
 | 
						|
		ocp_data &= ~LED_MODE_MASK;
 | 
						|
		ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
 | 
						|
	}
 | 
						|
 | 
						|
	r8152_power_cut_en(tp, false);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
 | 
						|
	ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
 | 
						|
	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL);
 | 
						|
	ocp_data &= ~MCU_CLK_RATIO_MASK;
 | 
						|
	ocp_data |= MCU_CLK_RATIO | D3_CLK_GATED_EN;
 | 
						|
	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ocp_data);
 | 
						|
	ocp_data = GPHY_STS_MSK | SPEED_DOWN_MSK |
 | 
						|
		   SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_TIMER);
 | 
						|
	ocp_data |= BIT(15);
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_TIMER, ocp_data);
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, 0xcbfc, 0x03e8);
 | 
						|
	ocp_data &= ~BIT(15);
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_TIMER, ocp_data);
 | 
						|
 | 
						|
	r8152b_enable_fc(tp);
 | 
						|
	rtl_tally_reset(tp);
 | 
						|
 | 
						|
	/* enable rx aggregation */
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
 | 
						|
 | 
						|
	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
 | 
						|
}
 | 
						|
 | 
						|
static void r8153_init(struct r8152 *tp)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	u32 ocp_data;
 | 
						|
 | 
						|
	r8153_disable_aldps(tp);
 | 
						|
	r8153_u1u2en(tp, false);
 | 
						|
 | 
						|
	r8152_wait_for_bit(tp, 0, MCU_TYPE_PLA, PLA_BOOT_CTRL,
 | 
						|
			   AUTOLOAD_DONE, 1, R8152_WAIT_TIMEOUT);
 | 
						|
 | 
						|
	for (i = 0; i < R8152_WAIT_TIMEOUT; i++) {
 | 
						|
		ocp_data = ocp_reg_read(tp, OCP_PHY_STATUS) & PHY_STAT_MASK;
 | 
						|
		if (ocp_data == PHY_STAT_LAN_ON || ocp_data == PHY_STAT_PWRDN)
 | 
						|
			break;
 | 
						|
 | 
						|
		mdelay(1);
 | 
						|
	}
 | 
						|
 | 
						|
	r8153_u2p3en(tp, false);
 | 
						|
 | 
						|
	if (tp->version == RTL_VER_04) {
 | 
						|
		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SSPHYLINK2);
 | 
						|
		ocp_data &= ~pwd_dn_scale_mask;
 | 
						|
		ocp_data |= pwd_dn_scale(96);
 | 
						|
		ocp_write_word(tp, MCU_TYPE_USB, USB_SSPHYLINK2, ocp_data);
 | 
						|
 | 
						|
		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
 | 
						|
		ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
 | 
						|
		ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
 | 
						|
	} else if (tp->version == RTL_VER_05) {
 | 
						|
		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_DMY_REG0);
 | 
						|
		ocp_data &= ~ECM_ALDPS;
 | 
						|
		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_DMY_REG0, ocp_data);
 | 
						|
 | 
						|
		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1);
 | 
						|
		if (ocp_read_word(tp, MCU_TYPE_USB, USB_BURST_SIZE) == 0)
 | 
						|
			ocp_data &= ~DYNAMIC_BURST;
 | 
						|
		else
 | 
						|
			ocp_data |= DYNAMIC_BURST;
 | 
						|
		ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data);
 | 
						|
	} else if (tp->version == RTL_VER_06) {
 | 
						|
		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1);
 | 
						|
		if (ocp_read_word(tp, MCU_TYPE_USB, USB_BURST_SIZE) == 0)
 | 
						|
			ocp_data &= ~DYNAMIC_BURST;
 | 
						|
		else
 | 
						|
			ocp_data |= DYNAMIC_BURST;
 | 
						|
		ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data);
 | 
						|
	}
 | 
						|
 | 
						|
	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2);
 | 
						|
	ocp_data |= EP4_FULL_FC;
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2, ocp_data);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL);
 | 
						|
	ocp_data &= ~TIMER11_EN;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL, ocp_data);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
 | 
						|
	ocp_data &= ~LED_MODE_MASK;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
 | 
						|
 | 
						|
	ocp_data = FIFO_EMPTY_1FB | ROK_EXIT_LPM;
 | 
						|
	if (tp->version == RTL_VER_04 && tp->udev->speed != USB_SPEED_SUPER)
 | 
						|
		ocp_data |= LPM_TIMER_500MS;
 | 
						|
	else
 | 
						|
		ocp_data |= LPM_TIMER_500US;
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL, ocp_data);
 | 
						|
 | 
						|
	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2);
 | 
						|
	ocp_data &= ~SEN_VAL_MASK;
 | 
						|
	ocp_data |= SEN_VAL_NORMAL | SEL_RXIDLE;
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2, ocp_data);
 | 
						|
 | 
						|
	ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);
 | 
						|
 | 
						|
	r8153_power_cut_en(tp, false);
 | 
						|
 | 
						|
	r8152b_enable_fc(tp);
 | 
						|
	rtl_tally_reset(tp);
 | 
						|
}
 | 
						|
 | 
						|
static void rtl8152_unload(struct r8152 *tp)
 | 
						|
{
 | 
						|
	if (tp->version != RTL_VER_01)
 | 
						|
		r8152_power_cut_en(tp, true);
 | 
						|
}
 | 
						|
 | 
						|
static void rtl8153_unload(struct r8152 *tp)
 | 
						|
{
 | 
						|
	r8153_power_cut_en(tp, false);
 | 
						|
}
 | 
						|
 | 
						|
static int rtl_ops_init(struct r8152 *tp)
 | 
						|
{
 | 
						|
	struct rtl_ops *ops = &tp->rtl_ops;
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	switch (tp->version) {
 | 
						|
	case RTL_VER_01:
 | 
						|
	case RTL_VER_02:
 | 
						|
	case RTL_VER_07:
 | 
						|
		ops->init		= r8152b_init;
 | 
						|
		ops->enable		= rtl8152_enable;
 | 
						|
		ops->disable		= rtl8152_disable;
 | 
						|
		ops->up			= rtl8152_up;
 | 
						|
		ops->down		= rtl8152_down;
 | 
						|
		ops->unload		= rtl8152_unload;
 | 
						|
		break;
 | 
						|
 | 
						|
	case RTL_VER_03:
 | 
						|
	case RTL_VER_04:
 | 
						|
	case RTL_VER_05:
 | 
						|
	case RTL_VER_06:
 | 
						|
		ops->init		= r8153_init;
 | 
						|
		ops->enable		= rtl8153_enable;
 | 
						|
		ops->disable		= rtl8153_disable;
 | 
						|
		ops->up			= rtl8153_up;
 | 
						|
		ops->down		= rtl8153_down;
 | 
						|
		ops->unload		= rtl8153_unload;
 | 
						|
		break;
 | 
						|
 | 
						|
	default:
 | 
						|
		ret = -ENODEV;
 | 
						|
		printf("r8152 Unknown Device\n");
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int r8152_init_common(struct r8152 *tp)
 | 
						|
{
 | 
						|
	u8 speed;
 | 
						|
	int timeout = 0;
 | 
						|
	int link_detected;
 | 
						|
 | 
						|
	debug("** %s()\n", __func__);
 | 
						|
 | 
						|
	do {
 | 
						|
		speed = rtl8152_get_speed(tp);
 | 
						|
 | 
						|
		link_detected = speed & LINK_STATUS;
 | 
						|
		if (!link_detected) {
 | 
						|
			if (timeout == 0)
 | 
						|
				printf("Waiting for Ethernet connection... ");
 | 
						|
			mdelay(TIMEOUT_RESOLUTION);
 | 
						|
			timeout += TIMEOUT_RESOLUTION;
 | 
						|
		}
 | 
						|
	} while (!link_detected && timeout < PHY_CONNECT_TIMEOUT);
 | 
						|
	if (link_detected) {
 | 
						|
		tp->rtl_ops.enable(tp);
 | 
						|
 | 
						|
		if (timeout != 0)
 | 
						|
			printf("done.\n");
 | 
						|
	} else {
 | 
						|
		printf("unable to connect.\n");
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int r8152_send_common(struct ueth_data *ueth, void *packet, int length)
 | 
						|
{
 | 
						|
	struct usb_device *udev = ueth->pusb_dev;
 | 
						|
	u32 opts1, opts2 = 0;
 | 
						|
	int err;
 | 
						|
	int actual_len;
 | 
						|
	ALLOC_CACHE_ALIGN_BUFFER(uint8_t, msg,
 | 
						|
				 PKTSIZE + sizeof(struct tx_desc));
 | 
						|
	struct tx_desc *tx_desc = (struct tx_desc *)msg;
 | 
						|
 | 
						|
	debug("** %s(), len %d\n", __func__, length);
 | 
						|
 | 
						|
	opts1 = length | TX_FS | TX_LS;
 | 
						|
 | 
						|
	tx_desc->opts2 = cpu_to_le32(opts2);
 | 
						|
	tx_desc->opts1 = cpu_to_le32(opts1);
 | 
						|
 | 
						|
	memcpy(msg + sizeof(struct tx_desc), (void *)packet, length);
 | 
						|
 | 
						|
	err = usb_bulk_msg(udev, usb_sndbulkpipe(udev, ueth->ep_out),
 | 
						|
			   (void *)msg, length + sizeof(struct tx_desc),
 | 
						|
			   &actual_len, USB_BULK_SEND_TIMEOUT);
 | 
						|
	debug("Tx: len = %zu, actual = %u, err = %d\n",
 | 
						|
	      length + sizeof(struct tx_desc), actual_len, err);
 | 
						|
 | 
						|
	return err;
 | 
						|
}
 | 
						|
 | 
						|
#ifndef CONFIG_DM_ETH
 | 
						|
static int r8152_init(struct eth_device *eth, bd_t *bd)
 | 
						|
{
 | 
						|
	struct ueth_data *dev = (struct ueth_data *)eth->priv;
 | 
						|
	struct r8152 *tp = (struct r8152 *)dev->dev_priv;
 | 
						|
 | 
						|
	return r8152_init_common(tp);
 | 
						|
}
 | 
						|
 | 
						|
static int r8152_send(struct eth_device *eth, void *packet, int length)
 | 
						|
{
 | 
						|
	struct ueth_data *dev = (struct ueth_data *)eth->priv;
 | 
						|
 | 
						|
	return r8152_send_common(dev, packet, length);
 | 
						|
}
 | 
						|
 | 
						|
static int r8152_recv(struct eth_device *eth)
 | 
						|
{
 | 
						|
	struct ueth_data *dev = (struct ueth_data *)eth->priv;
 | 
						|
 | 
						|
	ALLOC_CACHE_ALIGN_BUFFER(uint8_t, recv_buf, RTL8152_AGG_BUF_SZ);
 | 
						|
	unsigned char *pkt_ptr;
 | 
						|
	int err;
 | 
						|
	int actual_len;
 | 
						|
	u16 packet_len;
 | 
						|
 | 
						|
	u32 bytes_process = 0;
 | 
						|
	struct rx_desc *rx_desc;
 | 
						|
 | 
						|
	debug("** %s()\n", __func__);
 | 
						|
 | 
						|
	err = usb_bulk_msg(dev->pusb_dev,
 | 
						|
				usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in),
 | 
						|
				(void *)recv_buf,
 | 
						|
				RTL8152_AGG_BUF_SZ,
 | 
						|
				&actual_len,
 | 
						|
				USB_BULK_RECV_TIMEOUT);
 | 
						|
	debug("Rx: len = %u, actual = %u, err = %d\n", RTL8152_AGG_BUF_SZ,
 | 
						|
	      actual_len, err);
 | 
						|
	if (err != 0) {
 | 
						|
		debug("Rx: failed to receive\n");
 | 
						|
		return -1;
 | 
						|
	}
 | 
						|
	if (actual_len > RTL8152_AGG_BUF_SZ) {
 | 
						|
		debug("Rx: received too many bytes %d\n", actual_len);
 | 
						|
		return -1;
 | 
						|
	}
 | 
						|
 | 
						|
	while (bytes_process < actual_len) {
 | 
						|
		rx_desc = (struct rx_desc *)(recv_buf + bytes_process);
 | 
						|
		pkt_ptr = recv_buf + sizeof(struct rx_desc) + bytes_process;
 | 
						|
 | 
						|
		packet_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
 | 
						|
		packet_len -= CRC_SIZE;
 | 
						|
 | 
						|
		net_process_received_packet(pkt_ptr, packet_len);
 | 
						|
 | 
						|
		bytes_process +=
 | 
						|
			(packet_len + sizeof(struct rx_desc) + CRC_SIZE);
 | 
						|
 | 
						|
		if (bytes_process % 8)
 | 
						|
			bytes_process = bytes_process + 8 - (bytes_process % 8);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void r8152_halt(struct eth_device *eth)
 | 
						|
{
 | 
						|
	struct ueth_data *dev = (struct ueth_data *)eth->priv;
 | 
						|
	struct r8152 *tp = (struct r8152 *)dev->dev_priv;
 | 
						|
 | 
						|
	debug("** %s()\n", __func__);
 | 
						|
 | 
						|
	tp->rtl_ops.disable(tp);
 | 
						|
}
 | 
						|
 | 
						|
static int r8152_write_hwaddr(struct eth_device *eth)
 | 
						|
{
 | 
						|
	struct ueth_data *dev = (struct ueth_data *)eth->priv;
 | 
						|
	struct r8152 *tp = (struct r8152 *)dev->dev_priv;
 | 
						|
 | 
						|
	unsigned char enetaddr[8] = {0};
 | 
						|
 | 
						|
	memcpy(enetaddr, eth->enetaddr, ETH_ALEN);
 | 
						|
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
 | 
						|
	pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, enetaddr);
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
 | 
						|
 | 
						|
	debug("MAC %pM\n", eth->enetaddr);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
void r8152_eth_before_probe(void)
 | 
						|
{
 | 
						|
	curr_eth_dev = 0;
 | 
						|
}
 | 
						|
 | 
						|
/* Probe to see if a new device is actually an realtek device */
 | 
						|
int r8152_eth_probe(struct usb_device *dev, unsigned int ifnum,
 | 
						|
		      struct ueth_data *ss)
 | 
						|
{
 | 
						|
	struct usb_interface *iface;
 | 
						|
	struct usb_interface_descriptor *iface_desc;
 | 
						|
	int ep_in_found = 0, ep_out_found = 0;
 | 
						|
	int i;
 | 
						|
 | 
						|
	struct r8152 *tp;
 | 
						|
 | 
						|
	/* let's examine the device now */
 | 
						|
	iface = &dev->config.if_desc[ifnum];
 | 
						|
	iface_desc = &dev->config.if_desc[ifnum].desc;
 | 
						|
 | 
						|
	for (i = 0; i < ARRAY_SIZE(r8152_dongles); i++) {
 | 
						|
		if (dev->descriptor.idVendor == r8152_dongles[i].vendor &&
 | 
						|
		    dev->descriptor.idProduct == r8152_dongles[i].product)
 | 
						|
			/* Found a supported dongle */
 | 
						|
			break;
 | 
						|
	}
 | 
						|
 | 
						|
	if (i == ARRAY_SIZE(r8152_dongles))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	memset(ss, 0, sizeof(struct ueth_data));
 | 
						|
 | 
						|
	/* At this point, we know we've got a live one */
 | 
						|
	debug("\n\nUSB Ethernet device detected: %#04x:%#04x\n",
 | 
						|
	      dev->descriptor.idVendor, dev->descriptor.idProduct);
 | 
						|
 | 
						|
	/* Initialize the ueth_data structure with some useful info */
 | 
						|
	ss->ifnum = ifnum;
 | 
						|
	ss->pusb_dev = dev;
 | 
						|
	ss->subclass = iface_desc->bInterfaceSubClass;
 | 
						|
	ss->protocol = iface_desc->bInterfaceProtocol;
 | 
						|
 | 
						|
	/* alloc driver private */
 | 
						|
	ss->dev_priv = calloc(1, sizeof(struct r8152));
 | 
						|
 | 
						|
	if (!ss->dev_priv)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * We are expecting a minimum of 3 endpoints - in, out (bulk), and
 | 
						|
	 * int. We will ignore any others.
 | 
						|
	 */
 | 
						|
	for (i = 0; i < iface_desc->bNumEndpoints; i++) {
 | 
						|
		/* is it an BULK endpoint? */
 | 
						|
		if ((iface->ep_desc[i].bmAttributes &
 | 
						|
		     USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
 | 
						|
			u8 ep_addr = iface->ep_desc[i].bEndpointAddress;
 | 
						|
			if ((ep_addr & USB_DIR_IN) && !ep_in_found) {
 | 
						|
				ss->ep_in = ep_addr &
 | 
						|
					USB_ENDPOINT_NUMBER_MASK;
 | 
						|
				ep_in_found = 1;
 | 
						|
			} else {
 | 
						|
				if (!ep_out_found) {
 | 
						|
					ss->ep_out = ep_addr &
 | 
						|
						USB_ENDPOINT_NUMBER_MASK;
 | 
						|
					ep_out_found = 1;
 | 
						|
				}
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		/* is it an interrupt endpoint? */
 | 
						|
		if ((iface->ep_desc[i].bmAttributes &
 | 
						|
		    USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
 | 
						|
			ss->ep_int = iface->ep_desc[i].bEndpointAddress &
 | 
						|
				USB_ENDPOINT_NUMBER_MASK;
 | 
						|
			ss->irqinterval = iface->ep_desc[i].bInterval;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	debug("Endpoints In %d Out %d Int %d\n",
 | 
						|
	      ss->ep_in, ss->ep_out, ss->ep_int);
 | 
						|
 | 
						|
	/* Do some basic sanity checks, and bail if we find a problem */
 | 
						|
	if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) ||
 | 
						|
	    !ss->ep_in || !ss->ep_out || !ss->ep_int) {
 | 
						|
		debug("Problems with device\n");
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	dev->privptr = (void *)ss;
 | 
						|
 | 
						|
	tp = ss->dev_priv;
 | 
						|
	tp->udev = dev;
 | 
						|
	tp->intf = iface;
 | 
						|
 | 
						|
	r8152b_get_version(tp);
 | 
						|
 | 
						|
	if (rtl_ops_init(tp))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	tp->rtl_ops.init(tp);
 | 
						|
	tp->rtl_ops.up(tp);
 | 
						|
 | 
						|
	rtl8152_set_speed(tp, AUTONEG_ENABLE,
 | 
						|
			  tp->supports_gmii ? SPEED_1000 : SPEED_100,
 | 
						|
			  DUPLEX_FULL);
 | 
						|
 | 
						|
	return 1;
 | 
						|
}
 | 
						|
 | 
						|
int r8152_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
 | 
						|
				struct eth_device *eth)
 | 
						|
{
 | 
						|
	if (!eth) {
 | 
						|
		debug("%s: missing parameter.\n", __func__);
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	sprintf(eth->name, "%s#%d", R8152_BASE_NAME, curr_eth_dev++);
 | 
						|
	eth->init = r8152_init;
 | 
						|
	eth->send = r8152_send;
 | 
						|
	eth->recv = r8152_recv;
 | 
						|
	eth->halt = r8152_halt;
 | 
						|
	eth->write_hwaddr = r8152_write_hwaddr;
 | 
						|
	eth->priv = ss;
 | 
						|
 | 
						|
	/* Get the MAC address */
 | 
						|
	if (r8152_read_mac(ss->dev_priv, eth->enetaddr) < 0)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	debug("MAC %pM\n", eth->enetaddr);
 | 
						|
	return 1;
 | 
						|
}
 | 
						|
#endif /* !CONFIG_DM_ETH */
 | 
						|
 | 
						|
#ifdef CONFIG_DM_ETH
 | 
						|
static int r8152_eth_start(struct udevice *dev)
 | 
						|
{
 | 
						|
	struct r8152 *tp = dev_get_priv(dev);
 | 
						|
 | 
						|
	debug("** %s (%d)\n", __func__, __LINE__);
 | 
						|
 | 
						|
	return r8152_init_common(tp);
 | 
						|
}
 | 
						|
 | 
						|
void r8152_eth_stop(struct udevice *dev)
 | 
						|
{
 | 
						|
	struct r8152 *tp = dev_get_priv(dev);
 | 
						|
 | 
						|
	debug("** %s (%d)\n", __func__, __LINE__);
 | 
						|
 | 
						|
	tp->rtl_ops.disable(tp);
 | 
						|
}
 | 
						|
 | 
						|
int r8152_eth_send(struct udevice *dev, void *packet, int length)
 | 
						|
{
 | 
						|
	struct r8152 *tp = dev_get_priv(dev);
 | 
						|
 | 
						|
	return r8152_send_common(&tp->ueth, packet, length);
 | 
						|
}
 | 
						|
 | 
						|
int r8152_eth_recv(struct udevice *dev, int flags, uchar **packetp)
 | 
						|
{
 | 
						|
	struct r8152 *tp = dev_get_priv(dev);
 | 
						|
	struct ueth_data *ueth = &tp->ueth;
 | 
						|
	uint8_t *ptr;
 | 
						|
	int ret, len;
 | 
						|
	struct rx_desc *rx_desc;
 | 
						|
	u16 packet_len;
 | 
						|
 | 
						|
	len = usb_ether_get_rx_bytes(ueth, &ptr);
 | 
						|
	debug("%s: first try, len=%d\n", __func__, len);
 | 
						|
	if (!len) {
 | 
						|
		if (!(flags & ETH_RECV_CHECK_DEVICE))
 | 
						|
			return -EAGAIN;
 | 
						|
		ret = usb_ether_receive(ueth, RTL8152_AGG_BUF_SZ);
 | 
						|
		if (ret)
 | 
						|
			return ret;
 | 
						|
 | 
						|
		len = usb_ether_get_rx_bytes(ueth, &ptr);
 | 
						|
		debug("%s: second try, len=%d\n", __func__, len);
 | 
						|
	}
 | 
						|
 | 
						|
	rx_desc = (struct rx_desc *)ptr;
 | 
						|
	packet_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
 | 
						|
	packet_len -= CRC_SIZE;
 | 
						|
 | 
						|
	if (packet_len > len - (sizeof(struct rx_desc) + CRC_SIZE)) {
 | 
						|
		debug("Rx: too large packet: %d\n", packet_len);
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
 | 
						|
	*packetp = ptr + sizeof(struct rx_desc);
 | 
						|
	return packet_len;
 | 
						|
 | 
						|
err:
 | 
						|
	usb_ether_advance_rxbuf(ueth, -1);
 | 
						|
	return -ENOSPC;
 | 
						|
}
 | 
						|
 | 
						|
static int r8152_free_pkt(struct udevice *dev, uchar *packet, int packet_len)
 | 
						|
{
 | 
						|
	struct r8152 *tp = dev_get_priv(dev);
 | 
						|
 | 
						|
	packet_len += sizeof(struct rx_desc) + CRC_SIZE;
 | 
						|
	packet_len = ALIGN(packet_len, 8);
 | 
						|
	usb_ether_advance_rxbuf(&tp->ueth, packet_len);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int r8152_write_hwaddr(struct udevice *dev)
 | 
						|
{
 | 
						|
	struct eth_pdata *pdata = dev_get_platdata(dev);
 | 
						|
	struct r8152 *tp = dev_get_priv(dev);
 | 
						|
 | 
						|
	unsigned char enetaddr[8] = { 0 };
 | 
						|
 | 
						|
	debug("** %s (%d)\n", __func__, __LINE__);
 | 
						|
	memcpy(enetaddr, pdata->enetaddr, ETH_ALEN);
 | 
						|
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
 | 
						|
	pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, enetaddr);
 | 
						|
	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
 | 
						|
 | 
						|
	debug("MAC %pM\n", pdata->enetaddr);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
int r8152_read_rom_hwaddr(struct udevice *dev)
 | 
						|
{
 | 
						|
	struct eth_pdata *pdata = dev_get_platdata(dev);
 | 
						|
	struct r8152 *tp = dev_get_priv(dev);
 | 
						|
 | 
						|
	debug("** %s (%d)\n", __func__, __LINE__);
 | 
						|
	r8152_read_mac(tp, pdata->enetaddr);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int r8152_eth_probe(struct udevice *dev)
 | 
						|
{
 | 
						|
	struct usb_device *udev = dev_get_parent_priv(dev);
 | 
						|
	struct eth_pdata *pdata = dev_get_platdata(dev);
 | 
						|
	struct r8152 *tp = dev_get_priv(dev);
 | 
						|
	struct ueth_data *ueth = &tp->ueth;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	tp->udev = udev;
 | 
						|
	r8152_read_mac(tp, pdata->enetaddr);
 | 
						|
 | 
						|
	r8152b_get_version(tp);
 | 
						|
 | 
						|
	ret = rtl_ops_init(tp);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	tp->rtl_ops.init(tp);
 | 
						|
	tp->rtl_ops.up(tp);
 | 
						|
 | 
						|
	rtl8152_set_speed(tp, AUTONEG_ENABLE,
 | 
						|
			  tp->supports_gmii ? SPEED_1000 : SPEED_100,
 | 
						|
			  DUPLEX_FULL);
 | 
						|
 | 
						|
	return usb_ether_register(dev, ueth, RTL8152_AGG_BUF_SZ);
 | 
						|
}
 | 
						|
 | 
						|
static const struct eth_ops r8152_eth_ops = {
 | 
						|
	.start	= r8152_eth_start,
 | 
						|
	.send	= r8152_eth_send,
 | 
						|
	.recv	= r8152_eth_recv,
 | 
						|
	.free_pkt = r8152_free_pkt,
 | 
						|
	.stop	= r8152_eth_stop,
 | 
						|
	.write_hwaddr = r8152_write_hwaddr,
 | 
						|
	.read_rom_hwaddr = r8152_read_rom_hwaddr,
 | 
						|
};
 | 
						|
 | 
						|
U_BOOT_DRIVER(r8152_eth) = {
 | 
						|
	.name	= "r8152_eth",
 | 
						|
	.id	= UCLASS_ETH,
 | 
						|
	.probe = r8152_eth_probe,
 | 
						|
	.ops	= &r8152_eth_ops,
 | 
						|
	.priv_auto_alloc_size = sizeof(struct r8152),
 | 
						|
	.platdata_auto_alloc_size = sizeof(struct eth_pdata),
 | 
						|
};
 | 
						|
 | 
						|
static const struct usb_device_id r8152_eth_id_table[] = {
 | 
						|
	/* Realtek */
 | 
						|
	{ USB_DEVICE(0x0bda, 0x8050) },
 | 
						|
	{ USB_DEVICE(0x0bda, 0x8152) },
 | 
						|
	{ USB_DEVICE(0x0bda, 0x8153) },
 | 
						|
 | 
						|
	/* Samsung */
 | 
						|
	{ USB_DEVICE(0x04e8, 0xa101) },
 | 
						|
 | 
						|
	/* Lenovo */
 | 
						|
	{ USB_DEVICE(0x17ef, 0x304f) },
 | 
						|
	{ USB_DEVICE(0x17ef, 0x3052) },
 | 
						|
	{ USB_DEVICE(0x17ef, 0x3054) },
 | 
						|
	{ USB_DEVICE(0x17ef, 0x3057) },
 | 
						|
	{ USB_DEVICE(0x17ef, 0x7205) },
 | 
						|
	{ USB_DEVICE(0x17ef, 0x720a) },
 | 
						|
	{ USB_DEVICE(0x17ef, 0x720b) },
 | 
						|
	{ USB_DEVICE(0x17ef, 0x720c) },
 | 
						|
 | 
						|
	/* TP-LINK */
 | 
						|
	{ USB_DEVICE(0x2357, 0x0601) },
 | 
						|
 | 
						|
	/* Nvidia */
 | 
						|
	{ USB_DEVICE(0x0955, 0x09ff) },
 | 
						|
 | 
						|
	{ }		/* Terminating entry */
 | 
						|
};
 | 
						|
 | 
						|
U_BOOT_USB_DEVICE(r8152_eth, r8152_eth_id_table);
 | 
						|
#endif /* CONFIG_DM_ETH */
 | 
						|
 |