mirror of
https://github.com/smaeul/u-boot.git
synced 2025-10-31 12:08:19 +00:00
63 lines
1.5 KiB
Plaintext
63 lines
1.5 KiB
Plaintext
U-BOOT Port for FSForth ModNET50 Board
|
|
--------------------------------------
|
|
|
|
author: Thomas Elste <info@elste.org>
|
|
IMMS gGmbH <www.imms.de>
|
|
|
|
The port based upon an early (partial complete)
|
|
armboot-port from Stephan Linz for the ModNET50 Board.
|
|
|
|
|
|
Overview:
|
|
|
|
- board with Netsilicon NET+50 ARM7TDMI CPU without MMU
|
|
- 16 MB SDRAM
|
|
- 2 MB Flash (MBL29LV160BE)
|
|
- 10/100 Ethernet PHY (LXT971A)
|
|
|
|
|
|
Current Configuration (include/configs/modnet50.h):
|
|
|
|
Memory Map: 0x00000000 - 0x00FFFFFF 16M SDRAM
|
|
0x10000000 - 0x101FFFFF 2M Flash
|
|
|
|
The Flash uses a BB-Architectur with 35 sectors
|
|
(0:16K; 1,2:8K; 3:32K; 4-34:64K). U-Boot is located in
|
|
the first 5 sectors.
|
|
|
|
The environment is located at the end of the 4th Flash
|
|
sector (0x1001C000-0x1001FFFF).
|
|
|
|
Build:
|
|
|
|
U-boot should be build by using the ELDK Toolchain (arm-linux-*).
|
|
|
|
make modnet50_config
|
|
make
|
|
|
|
|
|
Status:
|
|
|
|
Everything seems to work fine. Booting images was tested by
|
|
booting uCLinux (with and without a separate ramdisk image) from
|
|
flash.
|
|
|
|
|
|
Files:
|
|
|
|
arch/arm/cpu/arm720t/serial_netarm.c .. serial I/O for the cpu
|
|
|
|
board/modnet50/lowlevel_init.S .. memory setup for ModNET50
|
|
board/modnet50/flash.c .. flash routines
|
|
board/modnet50/modnet50.c .. some board init stuff
|
|
|
|
drivers/net/netarm_eth.c .. ethernet driver for the NET+50 CPU
|
|
drivers/net/netarm_eth.h .. header for ethernet driver
|
|
|
|
include/configs/modnet50.h .. configuration file for ModNET50
|
|
|
|
include/netarm_*.h .. register and macro definitions for
|
|
the NETARM CPU family
|
|
|
|
doc/README.modnet50 .. this readme
|