mirror of
https://github.com/smaeul/u-boot.git
synced 2025-10-17 14:18:14 +01:00
f9dc67d18e
Driver for the TI LP5562 4 channel LED controller. Supports independent on/off control of all 4 channels. Supports LED_BLINK on 3 independent channels: blue/green/red. The white channel can blink, but shares the blue channel blink rate. Heavily based on patch originally from Doug Zobel [1]. I have modified it so it matches the DT bindings in the linux tree, and also follows the linux driver implementation more closely. This should address Tom's concerns, and also matches my goal of making the U-Boot driver work with our existing .dts which is known to work in linux. As our boards only have the R,G,B outputs connected, I have not actually tested how the white channel behaves, but the R,G,B work exactly as expected. [1] https://lore.kernel.org/u-boot/1547150757-1561-1-git-send-email-douglas.zobel@climate.com/ Cc: Doug Zobel <douglas.zobel@climate.com> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.