Alexey Brodkin 8b15010b1f arc: get rid of running_on_hw ...

ISS is obsolete now and nSIM is used for simulation instead.
In its turn nSIM properly handles baud-rate settings so get rid
of now useless check.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

2016-04-11 10:20:30 -07:00

..

altera_jtag_uart.c

altera_jtag_uart: change ioremap to map_physmem

2015-11-18 21:18:30 +08:00

altera_uart.c

altera_uart: change ioremap to map_physmem

2015-11-18 21:18:30 +08:00

arm_dcc.c

serial: dcc: Move driver to DM

2016-02-25 19:06:37 -05:00

atmel_usart.c

dm: at91: Add driver model support for the serial driver

2014-11-21 08:09:58 +01:00

atmel_usart.h

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

Kconfig

serial: Add support for Qualcomm serial port

2016-04-01 17:18:07 -04:00

lpc32xx_hsuart.c

serial: lpc32xx hsuart: port driver to driver model

2016-01-13 21:05:22 -05:00

Makefile

serial: Add support for Qualcomm serial port

2016-04-01 17:18:07 -04:00

mcfuart.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

ns16550.c

dm: ns16550: Add support for reg-offset property

2016-03-17 21:27:39 -06:00

sandbox.c

Use correct spelling of "U-Boot"

2016-02-06 12:00:59 +01:00

serial_arc.c

arc: get rid of running_on_hw

2016-04-11 10:20:30 -07:00

serial_bcm283x_mu.c

serial: add BCM283x mini UART driver

2016-03-27 09:12:52 -04:00

serial_bfin.c

Use correct spelling of "U-Boot"

2016-02-06 12:00:59 +01:00

serial_efi.c

debug_uart: Adjust the declaration of debug_uart_init()

2015-10-21 07:46:50 -06:00

serial_lpuart.c

dm: serial: Remove duplicated carriage return character

2016-03-14 15:34:50 -06:00

serial_msm.c

serial: Add support for Qualcomm serial port

2016-04-01 17:18:07 -04:00

serial_mxc.c

serial: Move carriage return before line feed for some serial drivers

2016-03-14 15:34:50 -06:00

serial_ns16550.c

serial: Remove serial_putc_raw_dev

2016-01-25 10:39:45 -05:00

serial_pic32.c

drivers: serial: add driver for Microchip PIC32 UART controller.

2016-02-01 22:14:00 +01:00

serial_pl01x_internal.h

dm: serial: Tidy up the pl01x driver

2014-10-22 10:36:57 -06:00

serial_pl01x.c

serial: pl01x: Add support for devices with the rate pre-configured.

2016-03-22 12:16:12 -04:00

serial_pxa.c

serial: Move carriage return before line feed for some serial drivers

2016-03-14 15:34:50 -06:00

serial_s3c24x0.c

serial: Move carriage return before line feed for some serial drivers

2016-03-14 15:34:50 -06:00

serial_s5p.c

debug_uart: Adjust the declaration of debug_uart_init()

2015-10-21 07:46:50 -06:00

serial_sh.c

serial: sh: Remove invalid UTF-8 character

2015-02-25 13:53:28 +09:00

serial_sh.h

serial: serial-sh: SCIFA interface for R-Car Gen2 SoCs

2015-08-31 17:31:26 +09:00

serial_stm32.c

serial: serial_stm32: move clock config from driver to board

2016-02-08 10:10:36 -05:00

serial_stm32x7.c

stm32x7: add support for stm32x7 serial driver

2016-02-24 18:43:54 -05:00

serial_stm32x7.h

stm32x7: add support for stm32x7 serial driver

2016-02-24 18:43:54 -05:00

serial_uniphier.c

serial: uniphier: use devm_get_addr() to get base address

2016-04-01 00:17:07 +09:00

serial_xuartlite.c

serial: uartlite: Add support for debug console

2016-01-27 15:55:49 +01:00

serial_zynq.c

serial: zynq: Change logic in putc

2016-02-22 16:21:04 +01:00

serial-uclass.c

x86: Allow use of serial soon after relocation

2016-03-17 10:27:24 +08:00

serial.c

Fix typo: firstly -> first.

2015-12-05 18:22:23 -05:00

usbtty.c

serial: Move carriage return before line feed for some serial drivers

2016-03-14 15:34:50 -06:00

usbtty.h

omap: clean-up dead configs

2014-08-09 11:17:04 -04:00