mirror of
https://github.com/easytarget/MQ-Pro-IO.git
synced 2026-01-25 04:13:27 +00:00
28 lines
1.2 KiB
Markdown
28 lines
1.2 KiB
Markdown
# Alternate device tree Examples:
|
|
Each folder contains a `.dts` file and a README showing the GPIO pin mappings.
|
|
|
|
Copy the desired `.dts` file to the [build-trees](../build-trees) folder and follow the readme there to build the device-tree binaries.
|
|
|
|
There are instructions at the end of that document on how you can use a custom `.dtb` and make it permanent across reboots and kernel upgrades.
|
|
|
|
The issue with using these trees is that **if** the upstream device tree or includes is modified you need to manually rebuild these trees.
|
|
|
|
EG any changes to the upstream `sun20i-d1-mangopi-mq-pro.dts` source needs to be detected and applied too. You need to examine file histories to do this.
|
|
- Fortunately this should not be an issue in practice; the kernel *should* remain very stable going forward. Ubuntu 24.04.1 is a LTS release..
|
|
|
|
The authors personal advice is to use this only if needed; or as a learning excercise.
|
|
|
|
## SPI and I2C
|
|
[SPI plus I2C interfaces](./spi_i2c)
|
|
* 1x SPI
|
|
* 4x I2C
|
|
* 3x UART (plus the console uart)
|
|
* 6 unassigned GPIO pins
|
|
|
|
## Serial
|
|
[Four UART interfaces](./serial)
|
|
* 4x UART (plus the console uart)
|
|
* UART3 has RTC/CTS pins available too
|
|
* 2x I2C
|
|
* 12 unassigned GPIO pins
|