It doesn't make sense for these files to have the x bit set. It was,
probably accidentally, added in:
Fixes: 2c494e62c31a (arm: dts: Stratix10: Add QSPI node)
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Enable PCIe/NVMe support on Data Modul i.MX8M Mini eDM SBC. Except for
the configuration options which are enabled, add slight adjustment
to board u-boot.dtsi, which is necessary as there is currently no
driver for the I2C PCIe clock generator. Since the generator is
strapped to be always on, it is possible to supplant the generator
functionality by fixed-clock.
Signed-off-by: Marek Vasut <marex@denx.de>
The YModem support in SPL was never really used on this device,
the SDP support is much more convenient on i.MX8M Mini based
hardware. Replace the YModem support with SDP support.
The SDP can be utilized by forcing the board into SDP boot mode
by grounding test point right next to silkscreen label U30, and
then by using mfgtools 'uuu -brun spl flash.bin' once the device
enumerates on host system USB bus. The SDP capable USB port is
available on the USB micro-B port on the base board.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The DRAM configuration GPIO straps must be accessible in SPL and before
relocation because the GPIOs are sampled both in U-Boot SPL as well as early
on in U-Boot proper. The already present bootph-pre-ram DT property made the
GPIO controllers available in SPL, but not early on in U-Boot proper, which
made gpio_request_list_by_name_nodev() in board dmo_get_memcfg() fail. Add
missing bootph-some-ram DT property to all GPIO controllers which are
referenced in dmo,ram-coding-gpios DT property to make those GPIO
controllers available early in U-Boot proper as well.
Fixes: 8c103c33fb14 ("dm: dts: Convert driver model tags to use new schema")
Signed-off-by: Marek Vasut <marex@denx.de>
u-boot.itb has been generated via mkimage_fit_atf.sh but it is on the way
out that's why convert it's description to binman.
Compare to script binman description is not able to configure BL31 and BL32
load/entry addresses which should be done separately.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/90b613796aee38158252c8bb1dfc3da0420f089d.1730452668.git.michal.simek@amd.com
There is necessary to do some steps to compose boot images. These steps
were in scripts in layers for a while. That's why introduce description via
binman to simplify wiring and remove all scripting around.
This should make sure that everybody is up2date with the latest versions.
The first step is to create fit image with DTBs with descriptions in
configuration node which is written as regular expression to match all SOM
versions.
Description is there for k24 and k26 in spite of low level psu_init
configuration is different. The reason is that it goes to u-boot.itb image
which is the same for k24 and k26.
u-boot.itb is another image which is generated. It is normally generated
via arch/arm/mach-zynqmp/mkimage_fit_atf.sh but this script is supposed to
be deprecated.
FIT image by purpose is using 64bit addresses to have default option to
move images to high DDR (above 4GB). TF-A and TEE are optional components
but in the most cases TF-A is present all the time and TEE(OP-TEE) is used
by some configurations too.
3rd generated image is boot.bin with updated user field which contains
version number. This image can be used with updated Image Selector
which supports A/B update mechanisms with rollback protection.
4th image is image.bin which binary file which contains boot.bin and
u-boot.itb together and can be programmed via origin Image Selector.
This image can be also used for creating one capsule which contains both
boot images (in SPL boot flow).
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/35bc47a4a4799c5f5dbea56a45340a2810538330.1730452668.git.michal.simek@amd.com
Make use of OF_UPSTREAM which uses Linux dts.
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
The x250 and SE250 are series of 10G L2+ switches from Allied Telesis.
There are a number of them in the range but as far as U-Boot is
concerned all the CPU block components are the same so there's only one
board defined.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
The phyCORE-i.MX 93 is available in various variants (e.g. different ram
sizes, eMMC HS400 yes/no). Enable hardware introspection for the
imx93-phyboard-segin_defconfig, so that during startup the SOM module
variant can be detected, and the hardware can be configured accordingly.
The resulting SPL and u-boot binary shall able to boot each
phyCORE-i.MX 93 module variant on each carrier board. Finally rename
imx93-phyboard-segin_defconfig to imx93-phycore_defconfig, to highlight
its SOM scope.
Signed-off-by: Christoph Stoidner <c.stoidner@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
The phyCORE-i.MX 93 is available in various variants. Relevant variant
options for the spl/u-boot are:
- with or without HS400 support for the eMMC
- with 1GB ram chip, or 2GB ram chip
The phyCORE's eeprom contains all information about the existing variant
options. Add evaluation of the eeprom data to the spl/u-boot to
enable/disable HS400 and to select the appropriate ram configuration at
startup.
Signed-off-by: Christoph Stoidner <c.stoidner@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Tested-by: Primoz Fiser <primoz.fiser@norik.com>
current generated flash.bin image does not longer
boot on cxg3 board.
Rename bootph-pre-ram to bootph-all so flash.bin
boots again!
Add u-boot specific change (add bootph-all property)
in A35_0 node to imx8qxp-capricorn-u-boot.dtsi
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
We have many HW with capricorn i.MX8X boards. The difference in u-boot is
at all by the display of the LEDs.
* put upstream a reference project & board for DT and defconfig
* use the capricorn prefix outside the board/siemens/capricorn folder
Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
imx8qxp based boards which use SPL drop error when
calling make all:
"""
Writing image to './flash.bin'
Node '/binman/imx-boot/spl': GetData: size 0x0
Node '/binman/imx-boot': GetPaddedDataForEntry: size 0x0
Node '/binman/imx-boot': GetData: 1 entries, total size 0x0
Node '/binman/imx-boot': GetPaddedDataForEntry: size 0x0
Wrote 0x0 bytes
Image 'imx-boot' is missing external blobs and is non-functional: spl
/binman/imx-boot/spl (spl.bin):
Missing blob
Some images are invalid
"""
Guard creation of flash.bin with CONFIG_XPL_BUILD option.
Signed-off-by: Heiko Schocher <hs@denx.de>
Fixes: c9713c155127 ("imx8-u-boot: Fix SPL guard option")
Since 50cdd3f74af3 ("clk: imx: clk-imx8mn Fix nand and spi clock parent"),
drivers/clk/imx/clk-imx8mn.c clk_get_by_name(dev, "osc_24m", &osc_24m_clk)
fails with error -22 EINVAL in SPL. This is because clk_get_by_name() in the
end calls fdtdec_parse_phandle_with_args(), which iterates over all phandles
in clock-controller@30380000 { clocks = <&osc_32k>, <&osc_24m>, ... } node
'clocks' property in an attempt to find the "osc_24m" clock, but fails to
resolve the &osc_32k phandle and returns with -EINVAL.
Include the osc_32k clock in SPL DTs as a low risk fix for v2025.01 release.
This way, fdtdec_parse_phandle_with_args() can resolve both the osc_32k and
following osc_24m phandle and successfully look up the osc_24m clock.
Fixes: 50cdd3f74af3 ("clk: imx: clk-imx8mn Fix nand and spi clock parent")
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mn-beacon
Wadim Egorov <w.egorov@phytec.de> says:
Our SoMs are available in multiple configurations, managed via device
tree overlays. To determine the specific variant in use, we read the
EEPROM and apply the appropriate overlays during boot to the device tree
used by the OS.
Apply overlays for phyCORE-AM62x and phyCORE-AM64x SoMs.
Future K3 SoMs will be able to reuse this logic and overlays.
Link: https://lore.kernel.org/r/20241030164815.1763506-1-w.egorov@phytec.de
Include SoM dt-overlays that handle variants of our SoMs into
u-boot's FIT image.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Include SoM dt-overlays that handle variants of our SoMs into
u-boot's FIT image.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
- drop A1 dtsi and other bindings includes in favor of Upstream ones
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmc05RgACgkQd9zb2sjI
SdHGxA/+LNFIfZzvrDlDTUC40vTO194gn+Iw61wcypYA98lbh3CIxan2r0G2SYqf
QMXOmKM6Qxlix6h4SZG3V96/zzgwaNkAobSK1/zsgw7ZcWb3n6Fh1hbuc6gSgQwN
YpHyJ2KtX9/CvA9qeLupjVgjWzFAnHysgo5dxsjqnWI/7dRu9DUjyvVxzI67xh33
8bNoOQ5m1VjLZ1s+9KPN/o8G7gKdCzFapArgM3yKlbbVw2Lpb6MWBpQEI3WviErk
srX+9GJqurwfIWZEEYQFumOJUoG5D7rvbh/mt8dTK2XNoaTUM7jua+xseRCb49gI
Yl+fVsN/e28vDdkoWwWt/9bRJ1uZ+9UrUkoXBjpH4r0QGgDetB//nu1xWdyYVREU
NdMQweOOW5VfMo31fVbrNi6xPDC7h6al8SCc2fX/ikdOJIWBl+vKh97Ni6Dwr6rq
8Ouwr8SIYgdei0M7dGvsHYHvRCclIWWg6xly7/6xChrQbjyc2qpjvSutRApd8Zmh
sOamFYBQ3XUEL1y8CHNlt+xaQbBsSkk7F1g3WQsQWpGSmuFv/896zv9DEjILfBBk
3EJYbRizc6zF4GQdTvj9Z58nssbAkygT0v1yBVTu9JJRmDrWVfujODsqlJO3SXPS
AHSD+OQfvB+41BbJvWgiLISWbyBM1GAjNp/4nBFx/L37iv4DZJg=
=1dBl
-----END PGP SIGNATURE-----
Merge tag 'u-boot-amlogic-next-20241113' of https://source.denx.de/u-boot/custodians/u-boot-amlogic into next
- khadas-vim3{l}: fix userdata size for android config
- drop A1 dtsi and other bindings includes in favor of Upstream ones
For Amlogic A1, we have to use dtsi from dts/upstream folder.
The only difference between this two files is the added cpu temperature
node definition in upstream version and additional assigned-clock for
USB. This patch is tested on a device with A113L SoC (AD401-like) and
everything is okay.
So, we can remove legacy arch/arm/dts/meson-a1.dtsi file.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Link: https://lore.kernel.org/r/20241112125836.3239832-2-avromanov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Sort the DTSI alphabetically. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
The ethernet0_rmii_pins_a pinmux change has no effect on any
DHSOM based hardware. The mco2_pins_a and mco2_sleep_pins_a
are both part of stm32mp15-pinctrl.dtsi . Drop both pinmux
changes.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Remove unused local DT copies after the OF_UPSTREAM conversion.
Fixes: cccb29fc1270 ("ARM: dts: stm32: Switch to using upstream DT on DH STM32 DHSOM")
Reported-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
In previous version of pwm driver, the polarity of pwm were implemented
in reverse. In recent release, that issue in the driver is fixed,
therefore, correctly set the polarity in the device tree.
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/3e8e38b77101335f86bca0f05b3988877bb12993.1729766551.git.michal.simek@amd.com
Use RTC available in HW on Kria SOM without using emulation that's why
configure it properly and disable emulated one.
Power on reset value of RTC Calibration register without battery backup is
not matching with crystal frequency which leads to RTC time drift. That's
why write CALIB_WRITE register with crystal frequency (0x7FFF). There is
also an option to write zero so that Linux will set default value (0x7FFF)
in driver probe but calibration 0 is not permited by DT schema.
Co-developed-by: Srinivas Goud <srinivas.goud@amd.com>
Signed-off-by: Srinivas Goud <srinivas.goud@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/9b684faeec85381b9b8fe796aaebc2ee79f17b8e.1729663761.git.michal.simek@amd.com
The FriendlyElec NanoPi R2S Plus is a single-board computer based on
Rockchip RK3328 SoC. It features e.g. 1 GB DDR4 RAM, 32 GB eMMC,
SD-card, 2x GbE LAN, optional M.2 SDIO Wi-Fi and 2x USB 2.0 host.
Features tested on a NanoPi R2S Plus 2309:
- SD-card boot
- eMMC boot
- Ethernet
- USB gadget
- USB host
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add support for Cool Pi GenBook, it works as a carrier board
connect with CM5 SOM.
Specification:
- Rockchip RK3588
- LPDDR5X 8/32 GB
- eMMC 64 GB
- HDMI Type A out x 1
- USB 3.0 Host x 1
- USB-C 3.0 with DisplayPort AltMode
- PCIE M.2 E Key for RTL8852BE Wireless connection
- PCIE M.2 M Key for NVME connection
- eDP panel with 1920x1080
Tested by Armbian boot on USB disk.
Change-Id: I4d9b8572dc7c400077dde666633f3fea1b47dd03
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Qnap TS433 is a 4-bay NAS based around the RK3568.
Two SATA bays are connected to the RK3568's own SATA controllers while
the other two are connected to a JMicron SATA controller living on the
PCIe bus.
It provides one 2.5Gb and one 1Gb ethernet port as well as 3 usb ports.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
For upstream Linux kernel we use below DTBs for HiHope boards:
- r8a774a1-hihope-rzg2m-ex.dtb
- r8a774e1-hihope-rzg2h-ex.dtb
- r8a774b1-hihope-rzg2n-ex.dtb
Update the CONFIG_OF_LIST to match the above. Now that we have switched
upstream DTS, drop deleting the nodes and also rename the
r8a774*-u-boot.dtsi files to r8a774*-ex-u-boot.dtsi to match the OF_LIST
files so that the `bootph-all` property gets applied to required nodes
in upstream DTS.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
We are now using the dts/upstream subtree for the RZ/G2L SoC family so
we can drop unused devicetree files from arch/arm/dts.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Enable OF_UPSTREAM to use upstream DT and add nxp/imx/ prefix to the
DEFAULT_DEVICE_TREE. And thereby directly build DTB from dts/upstream/src/
including *-u-boot.dtsi files from arch/$(ARCH)/dts/ directory.
Signed-off-by: Marek Vasut <marex@denx.de>
Commit 136b7b6d2e98 ("Subtree merge tag 'v6.11-dts' of dts repo [1] into
dts/upstream") updates the upstream dts for E850-96 board, bringing
upstream TRNG node. There is no need to keep TRNG node in appended dts
anymore, so remove it.
Tested on E850-96 board by running 'rng' command in U-Boot shell.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Create an SoC R5 dtsi file that could be used at board level R5 files. This
would help in keeping the SoC level changes in sync across board files.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
The Emcraft Systems NavQ+ kit is a mobile robotics platform
based on NXP i.MX8 MPlus SoC.
The following interfaces and devices are enabled:
- eMMC
- Gigabit Ethernet (through eQOS interface)
- SD-Card
- UART console
The device tree file is taken from upstream Linux Kernel
through OF_UPSTREAM
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Jan Kiszka <jan.kiszka@siemens.com> says:
This adds support for the new IOT2050 SM variant, introduces a sysinfo
driver which also permits SMBIOS support and switches the board to
OF_UPSTREAM. There are some further fixes for the boards included as well.
Not yet included is configuration support for DMA isolation via the PVU as
this depends on not yet merged DT bindings and another overlay.
[trini: This is just the first 10 patches in the series for now]
Link: https://lore.kernel.org/r/cover.1729577070.git.jan.kiszka@siemens.com
Main differences between the new variant and Advanced PG2:
1. Arduino interface is removed. Instead, an new ASIC is added for
communicating with PLC 1200 signal modules.
2. USB 3.0 type A connector is removed, only USB 2.0 type A connector is
available.
3. DP interface is tailored down. Instead, to communicate with the
PLC 1200 signal modules, a USB 3.0 type B connector is added but the
signal is not USB.
4. DDR size is increased to 4 GB.
5. Two sensors are added, one tilt sensor and one light sensor.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
[Jan: rebased over OF_UPSTREAM]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
