We need to read multiple times from different offsets in API v3.
Move the EEPROM read logic into a dedicated function to make it
usable multiple times.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
make it possible to set the RAM timing frequency statically independent
from the RAM size. Fixed RAM timing frequency can be used while the
RAM size is still determined by the EEPROM image.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
We might not be able to always rely on the EEPROM introspection data.
So add a config option alternative which configures the RAM size
to a fix value.
We still try to read the EEPROM introspection data at this point.
So we can print the SoM information if available.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Add support for different RAM sizes and speed grades on the
phyCORE-i.MX8MP.
Add support for 1GB 1.5GHz, 1GB 2GHz, 4GB 1.5GHz,
4GB 2GHz and 8GB 2GHz RAM.
The RAM size and speed grade is detected by the information
stored in the EEPROM on the SoM.
Co-developed-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Co-developed-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Co-developed-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
The PHYCORE_IMX8MP is used by the phyBOARD-Pollux. Migrate board to
OF_UPSTREAM. Linux kernel device tree for the board can be used as is,
corresponding U-Boot device tree files are removed. U-Boot tweaks are
kept unchanged.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Teresa Remmet <t.remmet@phytec.de>
The PHYCORE_IMX8MM is used by the phyBOARD-Polis and the
phyGATE-Tauri-L. Migrate both boards to OF_UPSTREAM. Linux kernel device
trees for both boards can be used as is, corresponding U-Boot device
tree files are removed. U-Boot tweaks are kept unchanged.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Teresa Remmet <t.remmet@phytec.de>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Environment handling code can be reused across all our K3 based SoMs.
Instead of adding the same code for every new SoM, move it to a common
board.c file.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Acked-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
The file include/eeprom.h is used only in some legacy non-DM I2C EEPROM
access cases. Remove most inclusions of this file as they are not
needed.
Signed-off-by: Tom Rini <trini@konsulko.com>
Daniel Schultz <d.schultz@phytec.de> says:
This patch series extends PHYTEC's SOM detection by minor
fixes, a generic helper function and a new valid flag.
Moreover, it adds a module to provide access to the SOM
detection for our TI AM6 products.
Add all functions to read each SOM option from the EEPROM
image and detect whether it's the correct product for this
image.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
The ptr variable is currently defined as int and sizeof
returns the size of the eeprom data struct as Byte (32 in total).
In case the eeprom is empty, the check, if the eeprom is empty,
will most likely stop after 8 iterations because it will continue
with the stack which should contain some data. Therefore, the
init function will detect an empty EEPROM as API0 and return with
the valid flag set to True.
Fixes: dc22188cdc8 ("board: phytec: Add common PHYTEC SoM detection")
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
For all of the functions that access the eeprom_data, make sure these
data are valid. Use the valid member of the phytec_eeprom_data struct.
This fixes a bug where only the API revision check guarded against
accessing rubbish. But if API revision was e.g. 6, eeprom setup failed
before, but phytec_get_imx8m_eth would still happily access the data.
Fixes: dc22188cdc8 ("board: phytec: Add common PHYTEC SoM detection")
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Add a new nember to the eeprom_data that indicates whether the
associated data is valid or not. Make use of this new member in the
phytec_eeprom_data_init function by setting the valid value
appropriately.
Move the eeprom data to a new struct payload that holds
the payload of the eeprom.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Add a generic function to apply overlays in our board code to not
implement the same logic in different PHYTEC products.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
The phycore-rk3288 can be migrated to OF_UPSTREAM.
Drop redundant device tree files, update MAINTAINERS and
defconfig's DEFAULT_DEVICE_TREE for rockchip vendor prefix accordingly.
Move device tree nodes required for u-boot to rk3288-phycore-rdk-u-boot.dtsi
such as chosen, i2c_eeprom_id and it's alias.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
The phycore-am64x can be migrated to OF_UPSTREAM.
Drop redundant device tree files, update MAINTAINERS and
defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly.
While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB
& SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
The phycore-am62x can be migrated to OF_UPSTREAM.
Drop redundant device tree files, update MAINTAINERS and
defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
The following information printed on every boot is not very
helpful for the users:
SOC: 0xa0009300
LC: 0x40040
Move them to debug() level.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Mathieu Othacehe <othacehe@gnu.org>
Select environment location based on the device we boot from.
Also, introduce a "boot" variable that represents the current boot
device and can be used by scripts.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
The "run netargs" command should come later in the "netboot" command
order when using dhcp since it sets the server and client ip addresses.
The previous order led to misconfigured kernel boot params and thus
kernel panic when serverip was not manually set.
Further, following Linux FHS 3.0, change the nfsroot default directory
to /srv/nfs.
Fixes: 60f64bec414e ("board: phytec: phycore_imx8mp: Add fec support")
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Add RAUC boot logic to the environment. This is the first board to
utilize this environment.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
Move the default bootcmd from the defconfig to the board environment.
No change in functionality.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
Move the environment into the board directory and convert it from a C
header to a text file. Sort the variables alphabetically.
No functional changes.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
define the phytec_get_som_type function also when the SoM detection is
disabled.
Fixes:
commit 110d321a56c3 ("board: phytec: common: phytec_som_detection: Add phytec_get_som_type")
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
While there are currently uses for a stanza of "config BOARD_SPECIFIC_OPTIONS"
followed by "def_bool y" and a series of select/imply statements, having
this option set followed by nothing else doesn't provide anything.
Remove these stanzas.
Signed-off-by: Tom Rini <trini@konsulko.com>
We need to differ between PCL-070 and PCM-070. PCL-070 supports 2GHz RAM
timings from pcb rev 1 or newer. PCM-070 supports 2GHz RAM timings from
pcb rev 3 or newer.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Put imx9_probe_mu declaration in a new mu.h header file.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
add support for Serial Downloader Boot via UUU as well as flashing emmc
via UUU on USB0 Port of phyBOARD Pollux.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Clean up all configuration files to adhere to yamllint rules.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
[trini: Update more yaml files added since this was posted]
Signed-off-by: Tom Rini <trini@konsulko.com>
Suggested-by: Nishanth Menon <nm@ti.com>
Commit aa7858fe5e2e ("board: phytec: som_detection: move definitions to
source file") moved function definitions from header to source file.
Makefile however was not updated to unconditionally (from
[..]_SOM_DETECTION) build the imx8 and phytec som detection units.
Also remove unused includes that cause build failures on arm 32bit
boards. SoM detection shall support 32bit boards as well, but arch
specific code should not be included in the generic module.
Fixes: aa7858fe5e2e ("board: phytec: som_detection: move definitions to source file")
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Add brief documentation on how to build a bootable U-Boot image for the
phyGATE-Tauri-L.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
phyGATE-Tauri-L-iMX8MM is a Gateway based on the phycore-imx8mm SoM.
As a result, all the board code of the phycore-imx8mm is used.
Device tree synced with kernel v6.7.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
When som_type does not match any case, it is uninitialized and the
function still tries to print the SoM info. Rather, this is an error
condition and the function should abort prematurely. Highlight this by
printing an error message and returning early.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Move all function definitions in {phytec|imx8m}_som_detection from the
header to the source file to prevent potential linker error regarding
multiple definitions. Also move the #if blocks with the definitions.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
In phytec_eeprom_data_init, after reading eeprom data into buffer, it is
checked whether all bytes are 0x0 by iterating over chunks of the
buffer. The offset, or index of the chunk, was never changed, leading to
repeated comparison of only the first chunk. Use array notation and
access chunk via array index to compare all chunks of the buffer.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
