10 Commits

Author SHA1 Message Date
Tom Rini
d892702080 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2024-10-08 09:28:10 -06:00
Jonas Karlman
d4fd24ffe4 rockchip: rk3588: Migrate to OF_UPSTREAM
Migrate RK3588 boards that exists in Linux v6.8 to use OF_UPSTREAM.

Following targets is not migrated to use OF_UPSTREAM:
- generic-rk3588: Generic target only meant for U-Boot use
- toybrick-rk3588: Merged in v6.9-rc1

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-05-07 15:56:10 +08:00
Quentin Schulz
20c5c183c6 rockchip: evb_rk3588 et al.: use DRAM banks from ATAGS
RK3588-based devices now support creating DRAM banks with proper holes
by reading the ATAGS from Rockchip TPL blob, so let's use that mechanism
instead.

Since ft_board_setup isn't defined anymore, there's no need for
selecting CONFIG_OF_BOARD_SETUP.

Similarly, because the evb_rk3588.c would be empty, it is simply
removed, with the (would-be-empty) Makefile as well.

The CONFIG_NR_DRAM_BANK now defaults to 10 which is a safe bet for
reading banks from ATAGS, so let's use the default value instead.

All defconfigs using the CONFIG_TARGET_EVB_RK3588 are updated at once
since they are impacted by this change.

Co-developed-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-04-26 15:47:05 +08:00
Jonas Karlman
b0cadb35da rockchip: Use common bss and stack addresses on RK3588
Currently the following memory layout is typically used on RK3588:
[    0, 256K) - SPL binary
[ 256K,   2M) - TF-A / reserved
[   -X,   4M) - SPL pre-reloc stack (SPL_STACK)
[ 3.5M,   4M)   - pre-reloc malloc heap (SPL_SYS_MALLOC_F_LEN)
[   -X,   6M) - SPL reloc stack (SPL_STACK_R_ADDR)
[   5M,   6M)   - reloc malloc heap (SPL_STACK_R_MALLOC_SIMPLE_LEN)
[  10M,   +X) - U-Boot proper binary (TEXT_BASE)
[   -X,  12M) - U-Boot proper pre-reloc stack (CUSTOM_SYS_INIT_SP_ADDR)
[11.5M,  12M)   - pre-reloc malloc heap (SYS_MALLOC_F_LEN)
[  64M, +16K) - SPL bss (SPL_BSS_START_ADDR, SPL_BSS_MAX_SIZE)

SPL can safely load U-Boot proper + FDT to [10M, 11.5M) with this layout.

However, on ROCK 5A the SPL stacks is overlapping:
[   -X,  16M) - SPL pre-reloc stack (SPL_STACK)
[15.5M,  16M)   - pre-reloc malloc heap (SPL_SYS_MALLOC_F_LEN)
[   -X,  16M) - SPL reloc stack (SPL_STACK_R_ADDR)
[  15M,  16M)   - reloc malloc heap (SPL_STACK_R_MALLOC_SIMPLE_LEN)

Because bind and probe udevice instanses is allocated on the pre-reloc
malloc heap, there is going to be an overlap when reloc malloc heap
reaches close to 512 KiB of usage.

Migrate to use common bss, stack and malloc heap size and addresses to
mitigate these limitations and allow for a larger U-Boot proper size.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
(Update for new boards defconfig)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2024-03-14 15:30:16 +08:00
Tom Rini
19f6576007 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2024-03-01 09:10:04 -05:00
Jonas Karlman
8ef97f8138 rockchip: rk3588: Enable eMMC HS200 mode
Writing to eMMC using HS200 mode work more reliably then other modes on
RK3588 boards.

Enable MMC_HS200_SUPPORT Kconfig option to prefer use of HS200 mode.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Weizhao Ouyang <o451686892@gmail.com>
2024-02-05 15:00:32 +08:00
Slawomir Stepien
7c084fd51c rockchip: rk3588-orangepi-5-plus: Build SPI image
Enable building of the SPI image, u-boot-rockchip-spi.bin, now that we
know what bootsource id values BootRom use for SPI flash on RK3588.

Fixes: b51cf8bb09b6 ("board: rockchip: Add Xunlong Orange Pi 5 Plus")
Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-01-19 10:57:36 +08:00
Jonas Karlman
bcbd9a6f5c rockchip: board: Remove dwc3 usb init and gadget handler functions
Remove board_usb_init() and dm_usb_gadget_handle_interrupts() functions
related to dwc3, they use e.g. a hard-coded reg address for RK3399 and
are obsolete with use of DM_USB_GADGET.

Use of DM_USB_GADGET, USB_DWC3_GENERIC and USB_DWC3_GADGET have replaced
same feature provided by the removed functions on RK3399 boards.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-01-19 10:57:36 +08:00
Tom Rini
42fb448a20 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2024-01-03 09:26:16 -05:00
Jonas Karlman
b51cf8bb09 board: rockchip: Add Xunlong Orange Pi 5 Plus
Xunlong Orange Pi 5 Plus is a single-board computer based on the
Rockchip RK3588 SoC. The board provides abundant interfaces, including
two HDMI output ports, one HDMI input port, two 2.5G Ethernet ports,
M.2 M-Key slot, M.2 E-Key slot, two USB 3.0, two USB 2.0, and two Type-C.

Features tested on a Orange Pi 5 Plus 4GB v1.2:
- SD-card boot
- eMMC boot
- SPI Flash boot
- PCIe/NVMe
- USB 2.0 host
- Ethernet

Device tree is imported from linux v6.7-rockchip-dts64-1 tag.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-24 15:55:16 +08:00