Adding binman node with target images description can be unwanted feature
but as of today there is no way to disable it.
Also on size constrained systems it is not useful to add binman description
to DTB.
Introduce BINMAN_DTB Kconfig symbol which allows separate DTB for target
from DTB for binman itself.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/f1379d2587f9bf279a7a75c318aabbc1b35ee0c6.1730452668.git.michal.simek@amd.com
The SPL_FIT_GENERATOR is long superseded by binman, drop SPL_FIT_GENERATOR
support as there are no more users.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/22109373594b6a5d1110be9420ccd8fbb93a61d3.1730452668.git.michal.simek@amd.com
u-boot.itb has been generated via mkimage_fit_atf.sh but it is on the way
out that's why convert it's description to binman.
Compare to script binman description is not able to configure BL31 and BL32
load/entry addresses which should be done separately.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/90b613796aee38158252c8bb1dfc3da0420f089d.1730452668.git.michal.simek@amd.com
There is necessary to do some steps to compose boot images. These steps
were in scripts in layers for a while. That's why introduce description via
binman to simplify wiring and remove all scripting around.
This should make sure that everybody is up2date with the latest versions.
The first step is to create fit image with DTBs with descriptions in
configuration node which is written as regular expression to match all SOM
versions.
Description is there for k24 and k26 in spite of low level psu_init
configuration is different. The reason is that it goes to u-boot.itb image
which is the same for k24 and k26.
u-boot.itb is another image which is generated. It is normally generated
via arch/arm/mach-zynqmp/mkimage_fit_atf.sh but this script is supposed to
be deprecated.
FIT image by purpose is using 64bit addresses to have default option to
move images to high DDR (above 4GB). TF-A and TEE are optional components
but in the most cases TF-A is present all the time and TEE(OP-TEE) is used
by some configurations too.
3rd generated image is boot.bin with updated user field which contains
version number. This image can be used with updated Image Selector
which supports A/B update mechanisms with rollback protection.
4th image is image.bin which binary file which contains boot.bin and
u-boot.itb together and can be programmed via origin Image Selector.
This image can be also used for creating one capsule which contains both
boot images (in SPL boot flow).
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/35bc47a4a4799c5f5dbea56a45340a2810538330.1730452668.git.michal.simek@amd.com
Update log level messages so that more critical messages can be logged
to console and help the troubleshooting with field devices.
This is a port of the upstream Linux patch to U-Boot.
https://lore.kernel.org/linux-mtd/20240223034758.13753-4-william.zhang@broadcom.com/
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
Set parameter_page_big_endian to zero for bcmbca
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
Make use of OF_UPSTREAM which uses Linux dts.
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
These device specific nand driver files can be removed because
they are now replaced by a common driver bcmbca_nand.c
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
We don't need the fallback anymore. Remove the code which uses these
files.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
We don't need the fallback anymore. As a first step to removing it,
drop the try...except clauses and unindent the code.
This produces a large diff but there are no other code changes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Like for test_fs, no need to mess with loop mounts.
Signed-off-by: Richard Weinberger <richard@nod.at>
Tweaks to reduce diff (keep mnt variable):
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a parameter to indicate the size of the image to build.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Since no mounting happens anymore, rename the "mnt"
directory to "scratch" and the related variables.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
There is no need to mount the filesystem on the host side.
All filesystem tools offer some way to fill the fs without mounting.
So, create the content on the host side, create and fill the fs
without mounting.
No more sudo or guestmount needed.
This new approach works because the tests don't care about user IDs
and no device files are needed.
If user IDs start to matter it's still possible to use wrapper
tools like fakeroot in future while filling the fs.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/23573
Android:
- bootstd: Implement bootimage v2 support
- bootstd: Support non-A/B in bootmeth_android
- Migrate VIM3 and VIM3L to use bootmeth_android
- bootstd: Additional test for bootimage v2
- bootstd: Optimize load time when reading partitions
The x250 and SE250 are series of 10G L2+ switches from Allied Telesis.
There are a number of them in the range but as far as U-Boot is
concerned all the CPU block components are the same so there's only one
board defined.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
The x530 board doesn't use EFI and our toolchains don't include gnutls
so disable the tool in the defconfig.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
As things have been moved to Kconfig there are a number of dead comments
left over in x530.h. Remove them.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
The x240 board doesn't use EFI and our toolchains don't include gnutls
so disable the tool in the defconfig.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Use standard boot instead of the distro boot scripts. Regenerate the
board defconfig now that some options are selected automatically.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Remove CFG_SYS_BAUDRATE_TABLE as there's no reason not to use the
defaults defined via config_fallbacks.h.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
The current implementation is reading the whole partition for boot and
vendor_boot image which can be long following the size of the
partition or the time to read blocks (driver/SoC specific).
For example with mediatek mt8365 EVK board, we have a 64MiB boot
partition and the boot image flashed in this partition is only 42MiB.
It takes ~8-9 secs to read the boot partition.
Instead we can retrieved the boot image and vendor boot image size
with these new functions:
- android_image_get_bootimg_size
- android_image_get_vendor_bootimg_size
Use these information and read only the necessary.
By doing this with mt8365 EVK board, we read boot image in ~5 secs.
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20241121-bootmeth-android-part-sizes-v1-1-25760bbd0f08@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Rename actual android bootmethod test to specify it's for boot image
version 4.
Add a unit test for testing the Android bootmethod with boot image
version 2.
This requires another mmc image (mmc8) to contain the following
partitions:
- misc: contains the Bootloader Control Block (BCB)
- boot_a: contains a fake generic kernel image
we can test this with:
$ ./test/py/test.py --bd sandbox --build -k test_ut # build the mmc8.img
$ ./test/py/test.py --bd sandbox --build -k bootflow_android
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Link: https://lore.kernel.org/r/20241126-adnroidv2-v4-5-11636106dc69@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Actually khadas vim3 use distro command to boot android image.
Move on new bootmeth android for A/B and non-A/B vim3 android.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Link: https://lore.kernel.org/r/20241126-adnroidv2-v4-4-11636106dc69@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Actually khadas vim3l use distro command to boot android image.
Move on new bootmeth android for A/B and non-A/B vim3l android.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Link: https://lore.kernel.org/r/20241126-adnroidv2-v4-3-11636106dc69@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Update android bootmeth to support non-A/B image.
Enable AB support only when ANDROID_AB is enabled.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Link: https://lore.kernel.org/r/20241126-adnroidv2-v4-2-11636106dc69@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
In the older USB controllers like for example in ChipIdea controller
used by the Tegra 2 the "USBADRA: Device Address Advance" bitflag
does not exist, so the new device address set during SET_ADDRESS
can't be deferred by hardware, which causes the host to not recognize
the device and give an error.
Instead store it until ep completes to apply the change into the hw
register as Linux kernel does. This should fix regression on old and
and be compatible with newer controllers.
Inspired by: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ef15e5490edc7edf808d3477ab32e0e320792f65
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20241126072956.64778-2-clamor95@gmail.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The phyCORE-i.MX 93 is available in various variants (e.g. different ram
sizes, eMMC HS400 yes/no). Enable hardware introspection for the
imx93-phyboard-segin_defconfig, so that during startup the SOM module
variant can be detected, and the hardware can be configured accordingly.
The resulting SPL and u-boot binary shall able to boot each
phyCORE-i.MX 93 module variant on each carrier board. Finally rename
imx93-phyboard-segin_defconfig to imx93-phycore_defconfig, to highlight
its SOM scope.
Signed-off-by: Christoph Stoidner <c.stoidner@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
The phyCORE-i.MX 93 is available in various variants. Relevant variant
options for the spl/u-boot are:
- with or without HS400 support for the eMMC
- with 1GB ram chip, or 2GB ram chip
The phyCORE's eeprom contains all information about the existing variant
options. Add evaluation of the eeprom data to the spl/u-boot to
enable/disable HS400 and to select the appropriate ram configuration at
startup.
Signed-off-by: Christoph Stoidner <c.stoidner@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Tested-by: Primoz Fiser <primoz.fiser@norik.com>
The phyCORE-i.MX 93 is available with a 1GB ram chip or a 2GB ram chip.
Add the ram timings for the 2GB chip, in form of a diff compared
to the existing LPDDR4X 1GB timings. With that, the SPL can select the
appropriate timings at startup.
Update also the 1GB ram timings with new version of the DDR Tool.
Signed-off-by: Christoph Stoidner <c.stoidner@phytec.de>
Tested-by: Primoz Fiser <primoz.fiser@norik.com>
update MAINTAINERS file, add some more board maintainers.
Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
The signal integrity test generates pattern on DDR lines
for certification. The signals must be as fast as possible
and unidirectional.
The test is required from our HW team. The available
u-boot memory test doesn't full fill the our requirements.
The test is planed to be used in all new siemens boards.
Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Add siemens specific memory test. Enable it through Kconfig option
SPL_CMT. The test is required from our HW team. It runs over
temperature during many days:
* must run indefinitively through the *whole* DDR area,
so we cannot use linux memtest for example.
* must write/read/check all values
Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
The eeprom contains the information on which module
we are running, so read it from the eeprom and print
it on the console.
Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
