The boot_fdt_add_mem_rsv_regions() function reserves the memreserve and
reserved-memory regions. These regions are being set with the LMB_NONE
flag which allows overwriting and re-using the regions. This was fine
earlier when the LMB memory map was local and not enforced
globally. But that is no longer the case. Mark these regions as
LMB_NOOVERWRITE so that they cannot be used.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reported-by: Vaishnav Achath <vaishnav.a@ti.com>
When printing the LMB flags for a memory region, there is a need to
check that the array index that is computed is a sane value. Put a
noisy assert in case this check fails, as that implies something with
the LMB code is not working as expected.
Reported-by: Coverity (CID 510463)
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
/Makefile already adds lib include paths to UBOOTINCLUDE. There is no point
in adding the same paths again.
Clearly separate the lines relating to NET and to NET_LWIP.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
People complained that enabling (SPL_)DM_WARN was now totally unusable
due to the amount of messages printed on the console.
Let's downgrade the log level of some messages that are clearly not on
the error path.
Note that there's one pr_debug in there, because it is followed by
pr_cont so it made sense to reuse the same family of functions.
Reported-by: Alexander Dahl <ada@thorsis.com>
Fixes: 6afdb1585112 ("dm: core: migrate debug() messages to use dm_warn")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Jan Kiszka <jan.kiszka@siemens.com> says:
This adds support for the new IOT2050 SM variant, introduces a sysinfo
driver which also permits SMBIOS support and switches the board to
OF_UPSTREAM. There are some further fixes for the boards included as well.
Not yet included is configuration support for DMA isolation via the PVU as
this depends on not yet merged DT bindings and another overlay.
[trini: This is just the first 10 patches in the series for now]
Link: https://lore.kernel.org/r/cover.1729577070.git.jan.kiszka@siemens.com
Main differences between the new variant and Advanced PG2:
1. Arduino interface is removed. Instead, an new ASIC is added for
communicating with PLC 1200 signal modules.
2. USB 3.0 type A connector is removed, only USB 2.0 type A connector is
available.
3. DP interface is tailored down. Instead, to communicate with the
PLC 1200 signal modules, a USB 3.0 type B connector is added but the
signal is not USB.
4. DDR size is increased to 4 GB.
5. Two sensors are added, one tilt sensor and one light sensor.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
[Jan: rebased over OF_UPSTREAM]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The U-Boot copy of the mpfs devicetree has, in general, been neglected
somewhat in comparison to the one in Linux. Moving to OF_UPSTREAM to
keep both in sync should serve to eliminate that discrepancy.
Additionally, moving to OF_UPSTREAM will let U-Boot automatically pick
up the devicetree rework that is in progress at [1].
Link: https://lore.kernel.org/all/20241002-private-unequal-33cfa6101338@spud/ [1]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
The clock driver for PolarFire SoC now requires syscon and regmap
features, so imply them to preserve implication of the clock driver.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Why get a devicetree description wrong once when you can get it wrong
twice? The original mistake, which the driver supports was failing to
describe the main PLL that the "cfg" and "periph" clocks parented by.
The second mistake was describing the "cfg" and "periph" clocks a
reg region within the clock controller, rather as two registers within
a syscon region that also contains pinctrl, interrupt muxing controls
and other functions.
Make up for lost time and describe these regions as they should have
been originally, preserving support for the existing two configurations
for the sake of existing systems with firmware-provided devicetrees.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
If we take an exception before u-boot is relocated, there's a good
chance we will end up in an endless loop of exceptions because resume is
invalid until after relocation.
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Align U-Boot with QEMU amd-microblaze-v-virt platform to be able to wire
it with CI.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Padmarao Begari <padmarao.begari@amd.com>
This requires some tweaking of the defconfig and
board_fit_config_name_match so that the new sources are taken into
account.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
To allow firmware to pick up all DTs from here, move the overlays that
are normally applied during DT fixup to the kernel source as well. Hook
then into the build nevertheless to ensure that regular checks are
performed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/91f8b825467651ebd51a4051f153ab136eeb1849.1724830741.git.jan.kiszka@siemens.com
Signed-off-by: Nishanth Menon <nm@ti.com>
[ upstream commit: dba27d026fc841d28a0ed373f617cc84ec0e4504 ]
(cherry picked from commit 741915246a92fc4c21537f9623a69612f7cef03a)
The PG1 A variant of the iot2050 series has been identified which
partially lacks support for lock-step mode. This implies that all
iot2050 boards can't support this mode. As a result, lock-step mode has
been disabled across all iot2050 boards for consistency and to avoid
potential issues.
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/d1f5f84db7a1597cd29628a0b503e578367b7b40.1724830741.git.jan.kiszka@siemens.com
Signed-off-by: Nishanth Menon <nm@ti.com>
[ upstream commit: e0133f883cf115d9e97e704169a9fb6003caefb2 ]
(cherry picked from commit 4b4872feb66a9043741819a57af280ffb4a96608)
We can simply use the default DT, Basic PG1, because no nodes that are
different between the variants play a role for SPL. Will help with the
migration to OF_UPSTREAM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The fdt fixup logic actually also applies to other possible variants who
also have device tree overlays. So generalize this part by extracting
it from the m.2 specific function and make it a standalone one.
Since now we only have M.2 variant consuming the overlay, it may not
have immediate effect for other variant, however this makes the future
variant more easier to apply fdt fixups.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Due to new DDR size introduction, the current logic of determining the
DDR size is not able to get the correct size.
Instead, the DDR size is determined by the FSBL(SEBOOT) then passed to
u-boot through the scratchpad info.
The SEBoot version must be >= D/V01.04.01.02 to support this change.
Also now for some variants, the DDR size may > 2GB, so borrow some code
from the TI evm to iot2050 to support more than 2GB DDR.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The power control pin of pcie interface not only works for M.2 interface
but also for miniPCIE, so promote this logic to all variants to
workaround the module hang issue.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
This prevented to set m2_manual_config - as evaluated by
m2_connector_setup - under strict configurations for secure boot.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
This commit introduces a number of failure to build issues. For now,
revert it and we will wait for v2 to address the issue and the build
problems as well.
This reverts commit e1c3c720e780eed6647796d69dca6184640234a5.
Signed-off-by: Tom Rini <trini@konsulko.com>
Fix "Integer handling issues (SIGN_EXTENSION)" in newly added code:
Cast serial_info.reg_offset to u64 to prevent an integer overflow when
shifted too many bits to the left. Currently this never happens as the
shift is supposed to be less than 4.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
After the recent dts/upstream subtree merge, the sdhi compatible string
used in the device tree for RZ/G2L family SoCs is "renesas,rzg2l-sdhi"
not "renesas,rcar-gen3-sdhi". This broke the ability to access the eMMC
and SD card devices on RZ/G2L boards.
Fix this by adding the new compatible string to the sdhi driver.
Fixes: 136b7b6d2e98 ("Subtree merge tag 'v6.11-dts' of dts repo [1] into dts/upstream")
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Add top level board/renesas/ MAINTAINERS file to catch all the common
Renesas file patterns and put people on CC via get_maintainer.pl script.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Renesas R-Car systems use mainline Linux DTs for U-Boot via OF_UPSTREAM,
which also includes headers from dts/upstream/include/dt-bindings/power .
Remove unused legacy DT header files from include/dt-bindings/power .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Renesas R-Car systems use mainline Linux DTs for U-Boot via OF_UPSTREAM,
which also includes headers from dts/upstream/include/dt-bindings/clock .
Remove unused legacy DT header files from include/dt-bindings/clock .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Define CBO inval and flush instructions and use those for the
dcache inval and flush operations respectively.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add insn-def.h which is similar to that in linux and contains the macros
to generate any instruction of type 'I' using the assembler's .insn
directive.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Milk-V Mars vendor board support package has value 0xa (multiplier=150) for both
rx and tx delay. Upstream Linux has this as 1500 for both rx and tx delay. There
is no documentation for why this should remain 1900 so correct it now. Mars CM
and Mars CM Lite follow the same network phy delay values as Mars in the vendor
board support package.
Fixes: 92db23f7660de5897c8e3b91489b5b5780ffcd16
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Fix bad delay values copied from vendor board support package of Star64, improves
performance and reliability of bottom network port.
Fixes: 7ebf7e77c0616ef0d2f58cc1684c230f656bd3d6
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
When moving from vendor U-Boot to the upstream U-Boot it is necessary to
reset the environment.
Provide the 'env erase' sub-command.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
* Messages written with log_err() should be terminated with linefeed.
* Spell device-tree with hyphen as elsewhere in U-Boot.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
This patch series enables full RVVM virtual machine support which was
earlier inconveniently provided as out-of-tree patchset.
This should be cleaner than a separate board config, since both
emulators provide similar feature set.
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Enable framebuffer for better virtual machine integration.
Some guests need EFI FB to work properly.
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
QEMU supports NVMe devices, but U-Boot only tries to boot from Virtio.
This is problematic when explicitly using NVMe, so fix that.
Additionally, RVVM virtual machine is almost fully compatible with QEMU,
except it only implements NVMe drives instead of VirtIO.
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Enable GPIO command and DWAPB_GPIO driver for LicheePi4A board.
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Starting with Linux commit 7569486d79ae ("gpio: dwapb: Add ngpios
DT-property support") the "snps,nr-gpios" property was marked
as deprecated.
And since all newly added dw-apb-gpio nodes are described using generic
"ngpios" property, it's time to add support for it.
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The SBI 3.0 specification [1] adds the following extensions:
* Firmware Features Extension
* Message Proxy Extension
Let the sbi command detect their availability.
The Firmware Features Extension is already implemented in OpenSBI.
Correct the text for the DBTR extension and move it to the same position
as in the specification.
[1] https://github.com/riscv-non-isa/riscv-sbi-doc/releases/download/vv3.0-rc1/riscv-sbi.pdf
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The config setting CMD_BOOTEFI_HELLO_COMPILE was removed in favour
of BOOTEFI_HELLO_COMPILE but the usage in this Makefile was not
updated. Fix it.
Fixes: 6fe80876dcc7 ("efi_loader: Rename and move CMD_BOOTEFI_HELLO_COMPILE")
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
The config setting CMD_BOOTEFI_HELLO_COMPILE was removed in favour
of BOOTEFI_HELLO_COMPILE but the dependency for
test_efi_helloworld_net_http was not updated and so is now incorrect
preventing the test from ever running. Fix it.
Fixes: 6fe80876dcc7 ("efi_loader: Rename and move CMD_BOOTEFI_HELLO_COMPILE")
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Patrick Rudolph <patrick.rudolph@9elements.com> says:
Based on the existing work done by Simon Glass this series adds
support for booting aarch64 devices using ACPI only.
As first target QEMU SBSA support is added, which relies on ACPI
only to boot an OS. As secondary target the Raspberry Pi4 was used,
which is broadly available and allows easy testing of the proposed
solution.
The series is split into ACPI cleanups and code movements, adding
Arm specific ACPI tables and finally SoC and mainboard related
changes to boot a Linux on the QEMU SBSA and RPi4. Currently only the
mandatory ACPI tables are supported, allowing to boot into Linux
without errors.
The QEMU SBSA support is feature complete and provides the same
functionality as the EDK2 implementation.
The changes were tested on real hardware as well on QEMU v9.0:
qemu-system-aarch64 -machine sbsa-ref -nographic -cpu cortex-a57 \
-pflash secure-world.rom \
-pflash unsecure-world.rom
qemu-system-aarch64 -machine raspi4b -kernel u-boot.bin -cpu cortex-a72 \
-smp 4 -m 2G -drive file=raspbian.img,format=raw,index=0 \
-dtb bcm2711-rpi-4-b.dtb -nographic
Tested against FWTS V24.03.00.
Known issues:
- The QEMU rpi4 support is currently limited as it doesn't emulate PCI,
USB or ethernet devices!
- The SMP bringup doesn't work on RPi4, but works in QEMU (Possibly
cache related).
- PCI on RPI4 isn't working on real hardware since the pcie_brcmstb
Linux kernel module doesn't support ACPI yet.
Link: https://lore.kernel.org/r/20241023132116.970117-1-patrick.rudolph@9elements.com
Add QEMU's SBSA ref board to azure pipelines and gitlab CI to run tests on it.
TEST: Run on Azure pipelines and confirmed that tests succeed.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Allows to build the RPi4 with ACPI enabled.
TEST: - Boots on qemu-system-aarch64 -machine raspi4b
- Boots on real hardware with arm_64bit=1 in config.txt
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Matthias Brugger <mbrugger@suse.com>
Cc: Peter Robinson <pbrobinson@gmail.com>
Initialize addr to zero which allows to build on the CI
which is more strict.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
On FDT platforms the APs are brought out of reset using the spin-table
as defined in the DT. On ACPI enabled platforms there's no FDT, thus
enable the ARMV8_MULTIENTRY and BLOBLIST to use the ACPI parking
protocol instead.
TEST: - APs enter Linux when run on qemu-system-aarch64 -machine raspi4b
- APs on real hardware do not enter Linux, but continue spinning in
their ACPI parking protocol spinloop. To be investigated.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Matthias Brugger <mbrugger@suse.com>
Cc: Peter Robinson <pbrobinson@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
When ACPI is enabled over FDT the APs cannot be brought out of reset
by the OS using the "FDT spin-table" mechanism, as no FDT is provided
to the OS. The APs must be released out of reset in u-boot and then
brought up in an ACPI compliant fashion.
When ARMV8_MULTIENTRY is specified, the APs are released from reset
and will enter U-Boot after it has been relocated as well.
By default ARMV8_MULTIENTRY is not selected, keeping existing behaviour.
TEST: All APs enter U-Boot when run on qemu-system-aarch64 and on
real hardware.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Matthias Brugger <mbrugger@suse.com>
Cc: Peter Robinson <pbrobinson@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
