CFG_MXC_USB_PORT is not used anywhere, so remove this unused symbol.
Suggested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Just like drivers/usb/host/ehci-mx6.c, add a default for
drivers/usb/host/ehci-mx5.c.
The motivation for doing this is to remove CFG_MXC_USB_PORTSC
from board config files.
All the mx5 boards, with the exeption of mx51evk, define
CFG_MXC_USB_PORTSC as:
#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
So move this definition as a default into ehci-mx5.c.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
CFG_MXC_USB_FLAGS is only used for drivers/usb/host/ehci-mx5.c, so it
can be removed from all the imx6/imx7/imx8m board config files.
mx51evk.h is the only place CFG_MXC_USB_FLAGS is not set to 0.
Suggested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Set the CONFIG_SPL_LOAD_FIT_ADDRESS for both verdin-imx8mm and
verdin-imx8mp configurations to specify the load address for FIT images
loaded by the SPL.
As per lastest instructions from NXP, the generation of a HABv4 CSF
(Command Sequence File) requires the U-Boot FIT image (u-boot.itb) load
address to be set to a fixed value when binman is used. The address is
defined by CONFIG_SPL_LOAD_FIT_ADDRESS.
Here we set CONFIG_SPL_LOAD_FIT_ADDRESS to an address 64MB past the
start of the DDR memory leaving plenty of room for the various DDR-
residing artifacts to be moved to their usual load addresses which are
close to the start of the DDR.
Signed-off-by: Rogerio Guerra Borin <rogerio.borin@toradex.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
The PSR register works correctly for GPIO pins in input mode,
but always returns 0 for GPIO pins in output mode unless the SION
bit is set.
The DR register should be used for GPIO pins in output mode
to allow correct getting of previously set output value.
Please note that the Linux gpio-mxc driver and the NXP U-Boot mxc_gpio
driver already use the DR register for all GPIO pins in output mode:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=442b2494b17d1a4f0a14721580271eb23ebffd424afc3f9094
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Chintan Vankar <c-vankar@ti.com> says:
This series enables Ethernet Boot on SK-AM62 device.
This series is based on commit 'f4f845b85926' of origin/next branch of
U-Boot.
Logs for Ethernet Boot for AM625-SK:
https://gist.github.com/chintanv133/464782796a9a60b9f5a49e674c5fc31a
Enable config options needed to support Ethernet boot on AM62x SK.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Add configs for enabling ETHBOOT in R5SPL.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
In order to support Ethernet boot on AM62x, probe AM65 CPSW NUSS
driver in board_init_f().
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
In absence of Device Manager (DM) services such as at R5 SPL stage,
driver will have to natively setup TCHAN/RCHAN/RFLOW cfg registers.
Existing UDMA driver performed the above mentioned configuration
for UDMA. Add similar configuration for PKTDMA here.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Function "k3_ringacc_ring_reconfig_qmode_raw()" should reset qmode to
requested value and should not update other fields in ring configuration
register.
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Expectation of k3_ringacc_ring_reset_raw() is to reset the ring to
requested size and not to 0. Fix this.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Initialize base address of ring config registers required to natively
setup ring cfg registers in the absence of Device Manager (DM) services
at R5 SPL stage. Since register property is defined as "ring" for PKTDMA
and "cfg" for UDMA, configure base address of ring configuration register
accordingly.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
RX_FL_CFG message should not be forwarded to TIFS and should be
handled within R5 SPL (when DM services are not available). Add
a no-op function to not handle RX_FL_CFG messages.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Initialize DRAM size in SPL stage since networking requires DDR
to be initialized.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Fix the dependency to avoid a warning if RSA_VERIFY_WITH_PKEY is enabled.
Fixes: b7463f198da6 ("Make ASYMMETRIC_KEY_TYPE depend on FIT_SIGNATURE")
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Use the API function list_count_nodes() to count the number of list
entries.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Instead of using the local imx6sl-evk, imx6sl-pinfunc.h and
imx6sl.dtsi devicetree copies from U-Boot, convert the imx6sl-evk board
to OF_UPSTREAM so that the upstream kernel devicetree can be used instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Remove mx6slevk_spinor_defconfig and mx6slevk_spl_defconfig in
favor of having a single mx6slevk_defconfig to help reducing
the maintenance effort.
Signed-off-by: Fabio Estevam <festevam@denx.de>
The SD card is registered as mmc device 0.
Fix it accordingly so that the board can boot to Linux
from the SD card.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.
Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementing the watchdog reset.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Depending on if a SPI-NOR flash is populated add the mtd partition
table to the device tree. For this we have to also probe the
flash before booting.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Add a new ahab_derive command that derives the hardware unique key (HUK)
into a 16 or 32 bytes key and stores it at the given address.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Ye Li <ye.li@nxp.com>
doc/develop/makefiles.rst has the following note:
if_changed should not be used more than once per target.
It stores the executed command in a corresponding .cmd
file and multiple calls would result in overwrites and
unwanted results when the target is up to date and only the
tests on changed commands trigger execution of commands.
The mach-imx Makefile does not follow this recommandation, so fix it
by implementing a single command that performs both the cpp_cfg
and imx9_check actions.
This change fixes an issue with "tools/buildman/buildman imx8ulp_evk"
failing every other time [1].
[1] https://lists.denx.de/pipermail/u-boot/2024-August/563192.html
Fixes: f637dfe8c468 ("mach-imx: Add i.MX93 binman support.")
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
The commit b81e31a1e6c5 ("bootstash: Do not provide a default address
for all") changed a bootstage unstash call to bootstage stash, this
has resulted in bootstage records stashed in SPL no longer get unstaged
in U-Boot proper. Fix this by changing back to a unstage call.
Fixes: b81e31a1e6c5 ("bootstash: Do not provide a default address for all")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
The commit b81e31a1e6c5 ("bootstash: Do not provide a default address
for all") changed a bootstage unstash call to bootstage stash, this
has resulted in bootstage records stashed in SPL no longer get unstaged
in U-Boot proper. Fix this by changing back to a unstage call.
Fixes: b81e31a1e6c5 ("bootstash: Do not provide a default address for all")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Boot ROM on Meson needs some pages to be read/written in a special mode:
384 byte ECC mode (so called "short" by Amlogic) and with scrambling
enabled. Such pages are located on the chip in the following way (for
example):
[ p0 ][ p1 ][ p2 ][ p3 ][ p4 ][ p5 ][ p6 ][ p7 ] ... [ pN ]
^ ^ ^ ^
pX is page number "X". "^" means "special" page used by boot ROM - e.g.
every 2nd page in the range of [0, 7]. Step (2 here) and last page in
range is read from the device tree.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240826131710.29746-4-avkrasnov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Based on Linux kernel:
commit f922bd798bb9 ("mtd: rawnand: add an option to specify NAND chip as a boot device")
Allow to define a NAND chip as a boot device. This can be helpful
for the selection of the ECC algorithm and strength in case the boot
ROM supports only a subset of controller provided options.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240826131710.29746-2-avkrasnov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Fix signed vs unsigned compare in read check in _spl_load()
Issue: when info->read() returns a negative value because of an error,
the comparison of 'read' (signed) with 'sizeof(*header)'
(unsigned silently converts the negative value into a very
large unsigned value and the check on the error condition
always return false, i.e. the error is not detected
Symptoms: if spl_load_image_fat() is unable to find the file 'uImage',
the SPL phase of the boot process just hangs after displaying
the following line:
Trying to boot from MMC1
Fix: cast 'sizeof(*header)' to int so the compare is now between
signed types
Reference: https://stackoverflow.com/questions/17293749/sizeof-operator-in-if-statement
Signed-off-by: Franco Venturi <fventuri@comcast.net>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
In the 7th generation of the SoC from Aspeed, the control logic of the
GPIO controller has been updated to support per-pin control. Each pin now
has its own 32-bit register, allowing for individual control of the pin’s
value, direction, interrupt type, and other settings.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
The Linux kernel documentation has transitioned from using
kconfig-language.txt to kconfig-language.rst. Therefore update all
occurrences of kconfig-language.txt.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Enabling CONFIG_DM_SEQ_ALIAS enables code which relies on
`trailing_strtol()` - which is only linked in SPL when CONFIG_SPL_STRTO
is enabled.
CONFIG_SPL_STRTO is not enabled by default - to ensure this function is
available in SPL, CONFIG_SPL_DM_SEQ_ALIAS should select
CONFIG_SPL_STRTO.
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Shifting this pointer in the loop will be more logical when working
with the code later, because you can see at a glance what exactly
changes at each iteration. Moreover, the code remains equivalent
because this variable is not used after the loop.
Signed-off-by: Maxim Moskalets <maximmosk4@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Jonas Karlman <jonas@kwiboo.se> says:
Use of fdt_parent_offset() is very expensive as detailed by the function
documentation:
NOTE: This function is expensive, as it must scan the device tree
structure from the start to nodeoffset, *twice*.
This series remove multiple calls to fdt_parent_offset() or
ofnode_get_parent() when instead a single call can be made and the
returned value can be reused.
This series help reduce boot time by around:
- ~137ms on a Radxa ROCK Pi 4 (RK3399)
- ~33ms on a Radxa ZERO 3W (RK3566)
The counter value read from TDR register may not be correct.
Read SECCNT and CNTR25M instead to get the correct timestamp.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Until a live tree is used in U-Boot proper after relocation, use of
ofnode_get_parent() will trigger a call to the very expensive
fdt_parent_offset(), as detailed by the function documentation:
NOTE: This function is expensive, as it must scan the device tree
structure from the start to nodeoffset, *twice*.
Re-use the returned value from a single call instead of having to make
multiple calls for same node.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Until a live tree is used in U-Boot proper after relocation, use of
ofnode_get_parent() will trigger a call to the very expensive
fdt_parent_offset() as detailed by the function documentation:
NOTE: This function is expensive, as it must scan the device tree
structure from the start to nodeoffset, *twice*.
Re-use the returned value from a single call instead of having to make
multiple calls for same node.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Use of fdt_parent_offset() is very expensive as detailed by the function
documentation:
NOTE: This function is expensive, as it must scan the device tree
structure from the start to nodeoffset, *twice*.
Re-use the returned value from a single call instead of having to make
multiple calls for same nodeoffset.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add Nuvoton BMC NPCM7xx/NPCM8xx sgpio driver.
BMC can use this driver to increase 64 GPI pins and 64 GPO pins to use.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Add test cases for sf commands to verify various SPI flash operations
such as erase, write and read. It also adds qspi lock unlock cases.
This test relies on boardenv_* configurations to run it for different
SPI flash family such as single SPI, QSPI, and OSPI.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Currently uclass index is used for bind/unbind which ignores alias
sequence numbering. Use device sequence number instead as it's
the number explicitly set in the DT.
Also update documentation to use sequence number.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Currently uclass index is shown in DM tree dump which ignores alias
sequence numbering. The result could be confusing since these 2 numbers
could be different. Show device sequence number instead as it's more
meaningful.
Also update documentation to use sequence number.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
If the function is called with no NAND device attached, then this
function can return error value, proceeding further ignoring the same
can cause system crash. This is seen when "mtd list" is run with no NAND
addon cards connected.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
