With the emmc and uart0 DT nodes updated to v6.11-rc1 in dts/upstream
there is no longer any need to keep overrides in board u-boot dtsi.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Update WiFi SDIO and BT UART related props to better reflect details
about the optional onboard RTL8723DS WiFi/BT module.
Also correct the compatible used for bluetooth to match the WiFi/BT
module used on the board.
Fixes: bc3753aed81f ("arm64: dts: rockchip: rock-pi-s add more peripherals")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-14-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 12c3ec878cbe3709782e85b88124abecc3bb8617 ]
(cherry picked from commit caba73747c927b4fdccea3aeb16e077b4e6af006)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The VCCIO4 io-domain used for WiFi/BT is using 1v8 IO signal voltage.
Add io-domains node with the VCCIO supplies connected on the board.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-13-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 100b3bdee6035192f6d4a1847970fe004bb505fb ]
(cherry picked from commit f93b224359278728f01767a4701678ada9c25570)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Be explicit about the Ethernet port and define mdio and ethernet-phy
nodes in the device tree for ROCK Pi S.
Fixes: bc3753aed81f ("arm64: dts: rockchip: rock-pi-s add more peripherals")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-8-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 4b64ed510ed946a4e4ca6d51d6512bf5361f6a04 ]
(cherry picked from commit 703b8eae20eec5dbb0e52f0e1fb71e712c007dae)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
UAR0 CTS/RTS is not wired to any pin and is not used for the default
serial console use of UART0 on ROCK Pi S.
Override the SoC defined pinctrl props to limit configuration of the
two xfer pins wired to one of the GPIO pin headers.
Fixes: 2e04c25b1320 ("arm64: dts: rockchip: add ROCK Pi S DTS support")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-6-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 7affb86ef62581e3475ce3e0a7640da1f2ee29f8 ]
(cherry picked from commit 9c72cd5fa9f971be8ebbc1f43bd74a72e33db2fa)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add cap-mmc-highspeed to allow use of high speed MMC mode using an eMMC
to uSD board. Use disable-wp to signal that no physical write-protect
line is present. Also add vcc_io used for card and IO line power as
vmmc-supply.
Fixes: 2e04c25b1320 ("arm64: dts: rockchip: add ROCK Pi S DTS support")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-5-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: fc0daeccc384233eadfa9d5ddbd00159653c6bdc ]
(cherry picked from commit 39110e4bec51c9ce6bbd342234b288dbfccb9f80)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The RK3308 SoC contains a controller for one-time-programmable memory,
add a device node for it.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-9-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 36d3bbc8cdbef2f83391f7708888265ac4c37a99 ]
(cherry picked from commit db11d284200d0f811a8f8238dbc9c63daf4e6131)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The merged upstream DT node for OTP differs in nodename and will cause
following build errors once rk3308.dtsi in dts/upstream is updated:
ERROR (duplicate_label): /nvmem@ff210000: Duplicate label 'otp' on /nvmem@ff210000 and /efuse@ff210000
ERROR (duplicate_label): /nvmem@ff210000/id@7: Duplicate label 'cpu_id' on /nvmem@ff210000/id@7 and /efuse@ff210000/id@7
Remove the OTP device node from soc u-boot dtsi in preparation for
replacing it with the merged upstream DT node in dts/upstream.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
RK3399 Puma has support for driving multiple displays at the same time,
the most notable scenario being HDMI+DSI since there exists a devkit
with both DSI display and HDMI output.
While HDMI seems to work fine in U-Boot, as the U-Boot logo is shown
whenever the EFI bootmeth is used, it messes up DSI in HDMI+DSI setup in
the Linux kernel. There are some ways to work around this bug but no
known appropriate fix for now, so let's rather not trigger this bug.
Since there isn't any client of ours that seems to be using this
feature, let's disable it for now. Users can re-enable this feature in
the event they have HDMI-only products.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The name of rk3568 evb in mainline kernel is rk3568-evb1-v10.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Most Rockchip aarch64 targets have now migrated to use OF_UPSTREAM,
however a few of the old dtsi and dt-bindings files still remain.
Remove remaining common dtsi and header files that can be included
directly from dts/upstream to prevent possible issues when future tags
from devicetree-binding is merged. No changes is expected with this.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
The commit f087f7fd277d ("rockchip: px30/rk3326: migrate to
OF_UPSTREAM") migrated px30/rk3326 boards to use OF_UPSTREAM, however
the soc dtsi and dt-bindings files remained.
Remove the remaining px30/rk3326 soc dtsi and dt-bindings to ensure the
files from dts/upstream is used.
The gpio-ranges props is moved to u-boot.dtsi files and a ethernet0
alias is added to px30-firefly, they are missing in the dts/upstream
files. No changes are expected with this.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
The device tree for Rockchip Toybrick TB-RK3588X has been merged into
dts/upstream with devicetree-rebasing v6.10-dts, migrate board to
OF_UPSTREAM.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The device tree for Pine64 PineTab2 has been merged into dts/upstream
with devicetree-rebasing v6.10-dts, migrate board to OF_UPSTREAM.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Port the RK3308 part of the Rockchip IO Domain driver from linux.
This differs from linux version in that vccio3 iodomain bit is enabled
in the write ops instead of in an init ops as in linux, this way we can
avoid keeping a full state of all supply that have been configured.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Hosts capable of 8-bit can also do 4 bits, fix use of 4-bit mode when
8-bit mode is supported.
This fixes use of 1-bit mode with SD NAND on ROCK Pi S using the DT in
v6.11-rc1 that chage to use 8-bit bus to also support eMMC. With this
4-bit mode is used with SD NAND and 8-bit mode with eMMC, same as in
Linux kernel.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Fix multiplex configuration for PCIe1L0 and PCIe1L1 in PCIESEL_CON for
RK3588 to correctly select between Combo PHYs and PCIe3 PHY.
Currently, the code incorrectly muxes both ports to Combo PHYs,
interfering with PCIe3 PHY settings.
Introduce PHY identifiers to identify the correct Combo PHY and set
the necessary bits accordingly.
This fix is adapted from the upstream Linux commit by Sebastian Reichel:
d16d4002fea6 ("phy: rockchip: naneng-combphy: Fix mux on rk3588")
Fixes: b37260bca1aa ("phy: rockchip: naneng-combphy: Use signal from comb PHY on RK3588")
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
Conversion to DM_I2C is mandatory, enable DM_I2C
to disable board removal warning. Convert EEPROM
and IT6251 access to use DM_I2C API.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Conversion to DM_I2C is mandatory, rework to remove
use of legacy I2C API.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Dhruva Gole <d-gole@ti.com> says:
This series aims to add documentation around the boot flow and tispl
packaging details regarding the TIFS Stub. While at it, also refactors the
k3 common docs to add more labels to provide more granularity on how we
include chunks from common docs into SoC specific docs.
This series also includes the binman related changes required to package
TIFS Stub to support Low Power Modes on BeaglePlay and phycore-am625 SOM.
Add support for packaging the TIFS Stub as it's required for basic Low
Power Modes like Deep Sleep.
The reason it is packaged using binman and not inherently as part of the
DM firmware is because for HS devices, customer owns the customer key
and only customer has access to it.
DM is release by TI, Since TI doesn't have access to the customer key it
cannot have a component that is signed by customer key.
Hence, it's left as part of binman to be signed and packaged.
While at it, also make sure it's documented in phycore-am62x
Reviewed-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
* Include the actual common documentation about the TIFS Stub and role
it plays to enable Low Power Modes in the platform.
* Add the AM62x boot flow to show at which point the TIFS Stub actually
gets loaded.
* Mention the TIFS Stub in the TISPL image format.
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Add support for packaging the TIFS Stub as it's required for basic Low
Power Modes like Deep Sleep.
The reason it is packaged using binman and not inherently as part of the
DM firmware is because for HS devices, customer owns the customer key
and only customer has access to it.
DM is release by TI, Since TI doesn't have access to the customer key it
cannot have a component that is signed by customer key.
Hence, it's left as part of binman to be signed and packaged.
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Since AM62x, AM62P and AM62A all use similar boot flows and their low
power mode s/w ARCH is also similar in the way that they make use of the
TIFS Stub, update their documentation to show where TIFS Stub is.
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Use the new boot_firmwares labels that help make documentation more
specific as to which firmwares are used in which devices
Signed-off-by: Dhruva Gole <d-gole@ti.com>
* Add documentation to briefly explain the role of TIFS Stub in relevant
K3 SoC's.
* Shed light on why TIFS Stub isn't package with the DM firmware itself.
* Modify the platform docs wherever the TIFS Stub documentation applies.
* Also, refactor and add a few new labels to help split the firmware
documentation chunks. This will make it easier to include them one by
one wherever applicable
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # verdin-am62
UBI block is virtual block device, which is an abstraction
over MTD layer. Therefore it is logical to use it in combination
with MTD drivers.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
UBI partition is abstraction over UBI volumes.
Can be used by UBI block device.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Block devices can already set partition type at initialization
stage, so, in this case is no point in searching for partition type.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
UBI block is an virtual device, that runs on top
of the MTD layer. The blocks are UBI volumes.
Intended to be used in combination with other MTD
drivers.
Despite the fact that it, like mtdblock abstraction,
it used with UCLASS_MTD, they can be used together
on the system without conflicting. For example,
using bcb command:
# Trying to load bcb via mtdblock:
$ bcb load mtd 0 mtd_partition_name
# Trying to load bcb via UBI block:
$ bcb load ubi 1 ubi_volume_name
User always must attach UBI layer (for example, using
ubi_part()) before using UBI block device.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Introduce ubi_volume_offset_write() helper, which
allow to write to ubi volume with specified offset.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Now user can pass an additional parameter 'offset'
to ubi_volume_read() function.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
MTD block - abstraction over MTD subsystem, allowing
to read and write in blocks using BLK UCLASS.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Add new MTD partition driver, which can be useful with
mtdblock driver combination.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Simon Glass <sjg@chromium.org> says:
This data structure provides a list of pointers / array of structures.
I was planning to use it for the lmb restructure, to allow it to
support any number of entries, but then I gave up on it.
There are quite a few places in U-Boot where such a list would be
useful, since it supports growing the array.
[...]
Example:
struct my_struct obj;
struct my_struct *ptr = alist_add(&lst, &obj, struct my_struct);
// now ptr is in the list
[trini: Reword the cover letter slightly, do not merge the RFC portion]
In various places it is useful to have an array of structures, but allow
it to grow. In some cases we work around it by setting maximum number of
entries, using a Kconfig option. In other places we use a linked list,
which does not provide for random access and can complicate the code.
Introduce a new data structure, which is a variable-sized list of structs
each of the same, pre-set size. It provides O(1) access and is reasonably
efficient at expanding linearly, since it doubles in size when it runs out
of space.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current implementation can return an extra result at the end when
the string ends with a space. Fix this by adding a special case.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present in tests it is possible to cause an out-of-memory condition
with malloc() but not realloc(). Add support to realloc() too, so code
which uses that function can be tested.
Signed-off-by: Simon Glass <sjg@chromium.org>
