This converts the sniper board (LG P970) to device-tree control
and DM I2C, both for SPL and U-Boot.
Note that we lose the call to board_mmc_power_init to enable power
for MMC2. This is now expected to take place through proper
regulators, which are not yet available with the twl4030 driver.
The call to twl4030_power_mmc_init is moved to spl_board_init for now.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
The am33xx_spl_board_init function was introduced as a way to add
board-specific SPL init for AM33xx devices since the spl_board_init
function was already used for SoC-specific init.
Now that the SoC-specific SPL init was moved to spl_soc_init, we can
use spl_board_init for this purpose and get rid of
am33xx_spl_board_init.
Rename the function in board files and enable the related config
option for concerned boards.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Both spl_board_init and spl_soc_init are available as ways to run
specific code in the SPL's board_init_r. Use the former for init
code that is specific to the SoC and leave spl_board_init available
for boards to use.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Paul Kocialkowski <paulk@sys-base.io> says:
Here is a bunch of configuration cleanups for OMAP boards, mostly
unifying and moving common configuration from board-specific defconfigs
to Kconfig definitions.
There's also a cleanup of the sniper (LG Optimus Black) defconfig,
prior to migrating it to DM/DT in a future follow-up series.
Remove custom config options that are not particularly necessary.
Align them with OMAP3 defaults used on other boards (especially for
memory locations).
Also enable Thumb build to reduce the SPL size and remove the custom
prompt text.
This makes the config a lot more minimalistic, maintainable and easier
to read.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The common EMIF init code used for DRA7xx does not explicitly fill
the gd->bd->bi_dram entries (like OMAP3 does), so there is no reason
to set an explicit number of DRAM banks which doesn't correspond to
anything in particular.
Remove the CONFIG_NR_DRAM_BANKS option from the concerned defconfigs.
The dram_init_banksize default implementation will be fine with the
default value for the config option.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The number of DRAM banks was defined to the same value in each OMAP3
board defconfig, which is expected and hardcoded in the code. Move the
common definition to the Kconfig option declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The maximum SPL size was defined to the same value in each OMAP3
board defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The maximum U-Boot size was defined to the same value in each OMAP3
board defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The init stack pointer was defined to the same value in each DRA7xx
board defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The DRA7xx EVM board use a slightly different init stack pointer
address compared to the AM57xx EVM board, for no particular reason.
Align the address with the AM57xx EVM board (which matches the usual
offset to the end of SRAM used by other OMAP devices) prior to removing
it as a per-board option in a later commit.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The init stack pointer was defined to the same value in each AM43xx
board defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The init stack pointer was defined to the same value in each AM33xx
board defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The AM33xx chiliboard and guardian boards use a slightly different
init stack pointer address compared to other AM33xx boards, for no
particular reason.
Align the address with other AM33xx boards prior to removing it as a
per-board option in a later commit.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The init stack pointer was defined to the same value in each OMAP3
board defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The SPL text base was defined to the same value in each OMAP3 board
defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Tested-by: Adam Ford <aford173@gmail.com> #am3517-evm
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
This updates the "old style" DTs to that of Linux v6.10, matching what
OF_UPSTREAM is at now. Hopefully we won't need to do this (manually)
anymore. Since this brings in the DT for a new board (Tanix TX1), also
add the defconfig for that, which has just been waiting for that sync.
There are three more fixes: two for the SPI clock setup, which avoids
too high frequencies in some cases, and one fix to avoid a build warning
with GCC 14 for the sunxi TOC0 part of the mkimage tool.
The gitlab CI passed, and I tested the SPI flash on the OrangePi Zero 3
and also booted that into Linux.
amd/xilinx:
- Enable CONFIG_MMC_SPEED_MODE_SET
env:
- support overriding spi dev from board code
clk:
- Add set_rate support for display clocks
spi:
- Describe is25lp01gg flash
zynq:
- Add support for 7z010_lr and 7z020_lr
zynqmp:
- Add support for zu1eg_lr
- Enable NFS for Kria
- DT changes
- Cleanup firmware handling in board_init()
versal-net:
- Setup spi seq number based on boot device
- dt-schema update for mini configurations
versal2:
- Disable uartlite driver
- Add support for mini configurations
- Enable NFS
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZrDqGAAKCRDKSWXLKUoM
IcleAKCMngdmRjasxRh+6CmntS1Q7KhUdwCcCaTPbn5x5eLT4QbsH05x2dJh6UM=
=pQP2
-----END PGP SIGNATURE-----
Merge tag 'xilinx-for-v2024.10-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze
AMD/Xilinx changes for v2024.10-rc2
amd/xilinx:
- Enable CONFIG_MMC_SPEED_MODE_SET
env:
- support overriding spi dev from board code
clk:
- Add set_rate support for display clocks
spi:
- Describe is25lp01gg flash
zynq:
- Add support for 7z010_lr and 7z020_lr
zynqmp:
- Add support for zu1eg_lr
- Enable NFS for Kria
- DT changes
- Cleanup firmware handling in board_init()
versal-net:
- Setup spi seq number based on boot device
- dt-schema update for mini configurations
versal2:
- Disable uartlite driver
- Add support for mini configurations
- Enable NFS
Add driver model support by using the uclass UCLASS_USB_GADGET_GENERIC.
Disable local usb_gadget_register_driver()/usb_gadget_unregister_driver()
implementation which is implemented in udc-core.c when DM_USB_GADGET
is enabled.
Replace dm_usb_gadget_handle_interrupts() with handle_interrupts ops
when DM_USB_GADGET is enabled.
Disable legacy struct usba_udc controller as controller point is extracted
from udevice private data with DM.
Disable legacy usba_udc_probe() to avoid conflict with DM when it's
enabled.
Compared to Linux driver only supported devices' DT bindings are included
(sorted as Linux driver)
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240725153204.358925-8-admin@hifiphile.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Rename atmel_usba_start() / atmel_usba_stop() to usba_udc_enable()
/ usba_udc_disable(), remove atmel_ prefix to be inline with other
functions. Also avoid confusion with DM start() / stop() functions.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240725153204.358925-6-admin@hifiphile.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
To make all static functions in the top, no functional change.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240725153204.358925-5-admin@hifiphile.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
tpm_tis_wait_init() is using the 'chip->timeout_b' field which is
initialized in tpm_tis_init(). However, the init-function is called
*after* tpm_tis_wait_init() introducing an uninitalized field access.
This commit switches both routines.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
[Ilias removed unusged 'chip' definition in tpm_tis_spi_probe()]
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Fixes: a5c30c26b28 ("tpm: Use the new API on tpm2 spi driver")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
If the maximum frequency is requested, we still fall into the CDR2
handling. But there the minimal divider is 2. For the sun6i and sun8i we
can do better with the CDR1 setting where the minimal divider is 1:
SPI_CLK = MOD_CLK / 2 ^ cdr with cdr = 0
Thus, handle the div = 1 case specially.
While at it, correct the comment above the calculation.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
The CDR2 divider calculation always yield a frequency greater than the
requested one. Use DIV_ROUND_UP() to keep the frequency equal or below
the requested one. This way, we can also drop the "if div > 0" check
because we know for a fact that div cannot be zero.
FWIW, this aligns the CDR2 calculation with the linux driver.
Suggested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
The Tanix TX1 is a tiny TV box, featuring the Allwinner H313 SoC with up
to 2GB of DRAM and 16GB of eMMC. There is no SD card or Ethernet port on
this small device, but it can be booted via the USB debug "FEL" mode.
The bootloader could then be written to the eMMC.
Add the defconfig for that board, and add the devicetree file to the
Makefile, for it to be built.
The DRAM parameters were taken from the vendor firmware on the eMMC.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Sync the devicetree files from the official Linux kernel tree, v6.10.
This is covering Allwinner SoCs with 32-bit and 64-bit ARM cores.
Besides mostly cosmectic changes, this adds cpufreq support to H616
boards, Nothing that U-Boot needs for itself, but helpful to pass on
to kernels. We also get the .dts files for the Tanix TX1 TV box and
three Anbernic handheld gaming devices.
As before, this omits the non-backwards compatible changes to the R_INTC
controller, to remain compatible with older kernels.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
C99 introduced the possibility to mark function parameters declared as
arrays with an extra keyword "static":
void foo(uint8_t digest[static SHA256_DIGEST_LENGTH]);
This requires the respective function argument to be at least as large
as specified. Passing in random pointers (like NULL) then becomes
undefined behaviour, and compilers warn about this.
Newer GCC compilers (starting with GCC 14) will also automatically mark
those parameters as "nonnull", and thus warn if a (redundant) NULL check
is done inside the function:
tools/sunxi_toc0.o tools/sunxi_toc0.c
tools/sunxi_toc0.c: In function 'toc0_verify_cert_item':
tools/sunxi_toc0.c:447:12: warning: 'nonnull' argument 'digest' compared to NULL [-Wnonnull-compare]
447 | if (digest && memcmp(&extension->digest, digest, SHA256_DIGEST_LENGTH)) {
| ^
Remove the unnecessary NULL check from toc0_verify_cert_item(), to avoid
the warning.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
[Andre: extend commit message]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Simon Glass <sjg@chromium.org> says:
This series includes fixes to get some rockchip and nvidia boards
working again. It also drops the broken Beaglebone Black config and
provides a devicetree fix for coral (x86).
The code here is confusing due to large blocks which are #ifdefed out.
Add a function phase_sdram_init() which returns whether SDRAM init
should happen in the current phase, using that as needed to control the
code flow.
This increases code size by about 500 bytes in SPL when the cache is on,
since it must call the rather large rockchip_sdram_size() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present gd->ram_size is 0 in SPL, meaning that it is not possible to
enable the cache. Correct this by always populating the RAM size
correctly.
This increases code size by about 500 bytes in SPL, since it must call
the rather large rockchip_sdram_size() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
On some boards, the bloblist is created in SPL once SDRAM is ready. It
cannot be accessed until that point, so is not available early in SPL.
Add a condition to avoid a hang in this case.
This fixes a hang in chromebook_coral
Fixes: 70fe2385943 ("fdt: Allow the devicetree to come from a bloblist")
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Raymond Mao <raymond.mao@linaro.org>
There is no need to remove input files. It makes it harder to diagnose
failures. Keep the payload file.
There is no test for this condition, but one could be added.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The tool must return an error code when invalid arguments are provided,
otherwise binman has no way of knowing that anything went wrong.
Correct this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: fab430be2f4 ("tools: add mkeficapsule command for UEFI...")
Tools cannot be assumed to be present. Add a check for this with the
mkeficpasule tool.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: b617611b27a ("binman: capsule: Add support for generating...")
Tools should have an option to obtain the version, so add this to the
mkeficapsule tool.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The correct operating mode for the fan is inversed (1). The
previous pwm driver implementation had a bug and the polarity
information was propagated incorrectly to the kernel. The normal (0)
polarity specified in the device tree was incorrectly clearing the
polarity bit in the counter control register. After the bug fix,
setting the polarity to inversed (1) in the device tree will clear
the polarity bit.
Signed-off-by: Vishal Patel <vishal.patel@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/4658ae8576882f5d28ad57ca74a7b798a546ec37.1722241096.git.michal.simek@amd.com
Add "rs485-rts-delay" property to uartps node with delay_rts_before_send
and delay_rts_after_send values as 10ms for rs485 mode on KD240.
10ms rts delay values have been chosen based on testing with rs485
temperature sensor (which is part of the kit) as safe minimum value
for reliable operation at a baud rate of 9600.
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/0e0c4c067236e11f661c1d067017e1ca975c9ddb.1721297721.git.michal.simek@amd.com
