The primary upstream URL for tf-a has moved, in some cases
things like tags are not always pushed to the old URL so
update the URLs to the primary upstream project URL.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Transfer initiation and completion for the non-zero Endpoints are
handled by cdns3_ep_run_transfer() and cdns3_transfer_completed()
respectively.
Failing to flush the cache associated with the TRB Pool within
cdns3_ep_run_transfer() results in the transfers never being initiated.
Similarly, failing to invalidate the cache associated with the TRB pool
within cdns3_transfer_completed() results in the transfers never being
completed.
Fix this.
Fixes: 7e91f6ccdc84 ("usb: Add Cadence USB3 host and gadget driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Marek Vasut <marex@denx.de>
The buck variable is zero based, i.e. buck=0 match BUCK1 in datasheet.
Remove any buck + 1 calculation to be more consistent in usage of the
buck variable across the different RK8xx variants in the driver.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Wrong POWER_EN reg is used to get and set enabled state for the RK806
buck 4 and 8 regulators, also wrong POWER_SLP_EN0 bit is used for
suspend state for the RK806 buck 1-8 regulators.
Fix this by not adding one to the zero based buck variable.
Fixes: f172575d92cd ("power: rk8xx: add support for RK806")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
U-Boot is currently unable to automatically enable regulators which
contain DT property regulator-always-on or regulator-boot-on. There
is an ongoing work to add this functionality to regulator core code,
but until the proper solution lands, add this awful workaround code
to force these regulators on. This is specifically needed to assure
the VIO regulator used to supply ethernet magnetics is enabled.
Signed-off-by: Marek Vasut <marex@denx.de>
Do not apply bitwise AND to register value and expected value, only
apply bitwise AND to register value and mask, and only then compare
the result with expected value that the function polls for.
Fixes: b49105320a5b ("stm32mp: psci: Implement PSCI system suspend and DRAM SSR")
Signed-off-by: Marek Vasut <marex@denx.de>
Update the TAMP_SMCR BKP..PROT fields to put first 10 registers
into protection zone 1 and next 5 into zone 2. This fixes use of
boot counter which is often in zone 3 and has to be updated from
Linux, which runs in NS.
Fixes: 73f7fc944cf6 ("ARM: stm32: Initialize TAMP_SMCR BKP..PROT fields on STM32MP15xx")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
In lpddr4_start function error returned by lpddr4_enablepiinitiator
may go undetected due to overwrite of return code.
Add support to handle error in above case.
Reported-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Documentation:
* Correct function descriptions that are not Sphinx conformant.
* Correct incorrect dependency CONFIG_USB_USB_GADGET in the ums command
description.
-----BEGIN PGP SIGNATURE-----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=aqv6
-----END PGP SIGNATURE-----
Merge tag 'doc-2024-10-rc6' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request doc-2024-10-rc6
Documentation:
* Correct function descriptions that are not Sphinx conformant.
* Correct incorrect dependency CONFIG_USB_USB_GADGET in the ums command
description.
Replace CONFIG_USB_USB_GADGET by CONFIG_USB_GADGET_DOWNLOAD.
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The function name in the description must match the function.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Correct the description of the select.id member to fix a kernel-doc
warning.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
* Add missing function names.
* Align names used in descriptions with function names.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The name used in the function description must match the function.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The Sphinx documentation build process cannot handle the interspersed
'private:' and 'public:' comments. Remove them.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The function name must match the name used in the description.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
* The function name must be provided in the description.
* The function name must match the name used in the description.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
beagleboneai64 boot was broken after OF_UPSTREAM support for
J721E SOC.
So add bootph in chipid node similar to other boards of
this SOC.
Fixes: 46bb1405b461 ("arm: dts: k3-j721e: Move to OF_UPSTREAM")
Reported-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Roger Quadros <rogerq@kernel.org> says:
TI upstream has moved from "mmio-mux" to "reg-mux" that doesn't
require the Mux device node's parent to be a syscon type.
Add support for "reg-mux" compatible.
use dev_dbg() instead of dev_info() for debug related
prints.
Get's rid of below print from console.
"cdns,sierra serdes@5030000: sierra probed"
Signed-off-by: Roger Quadros <rogerq@kernel.org>
With "reg-mux" compatible the driver no longer expects the parent
device to be a syscon type. It uses it's own regmux.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
We shouldn't have had the link to our git tree be contained within "``"
as that meant that it did not work as a link, so remove those. And
rather than make this a link plus text, keep this as a link within the
text for overall clarity.
Suggested-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Fix link errors caused by missing Kconfig dependencies:
1. DFU_OVER_USB compiles common/dfu.c which calls g_dnl_clear_detach()
which is implemented in drivers/usb/gadget/g_dnl.c which needs
USB_GADGET_DOWNLOAD. Test case:
$ printf "CONFIG_USB_GADGET_DOWNLOAD=n\nCONFIG_USB_FUNCTION_FASTBOOT=n" \
>>configs/am62px_evm_a53_defconfig
$ make am62px_evm_a53_defconfig
$ make CROSS_COMPILE=aarch64-linux-gnu-
[...]
common/dfu.c:34:(.text.run_usb_dnl_gadget+0x68): undefined reference to `g_dnl_clear_detach
[...]
2. With the above fixed, the same build causes:
common/spl/spl_dfu.c:29:(.text.spl_dfu_cmd+0xb0): undefined reference to `run_usb_dnl_gadget'
This is because SPL_DFU compiles common/spl/spl_dfu.c which calls
run_usb_dnl_gadget() which is implemented in common/dfu.c which needs
DFU_OVER_USB.
Therefore add these dependencies to Kconfig.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20240910102751.3182982-1-jerome.forissier@linaro.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
* doc/develop/sending_patches.rst: Clarify when to use which branch
* doc/arch/m68k.rst: Update toolchain comment
* doc/arch/mips.rst: Update toolchain list
* doc: Update rST to not reference the old wiki
* doc/mkeficapsule.1: Update homepage link
* bootcount: Update to point to current documentation
* binman: Update links for sending patches
-----BEGIN PGP SIGNATURE-----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=0nfu
-----END PGP SIGNATURE-----
Merge tag 'doc-2024-10-rc4' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request doc-2024-10-rc4
* doc/develop/sending_patches.rst: Clarify when to use which branch
* doc/arch/m68k.rst: Update toolchain comment
* doc/arch/mips.rst: Update toolchain list
* doc: Update rST to not reference the old wiki
* doc/mkeficapsule.1: Update homepage link
* bootcount: Update to point to current documentation
* binman: Update links for sending patches
When linking to our documentation for submitting patches, we shouldn't
point at the old wiki but instead our current documentation.
Signed-off-by: Tom Rini <trini@konsulko.com>
The current documentation for the bootcount API is on our website and
not the old wiki, update the link in two places.
Signed-off-by: Tom Rini <trini@konsulko.com>
In two places we had references to the old wiki pages instead of links
to the relevant part of our documentation. Update (and slightly reword)
these spots.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove both the ELDK and emdebian links as they are broken, and add a
link to the kernel.org toolchains which we use in CI.
Signed-off-by: Tom Rini <trini@konsulko.com>
The previous wording on the paragraph about what branch to use when
submitting patches did not reflect how / when the next branch is
currently used. Reword this to note that master should be used for bug
and regression fixes, always, and that next should be used once it
opens, with -rc2.
Reported-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The commit mentioned in Fixes broke the
CONFIG_DEVICE_TREE_INCLUDES feature, with the result that any board
setting any non-empty value for that fails to build.
The parent of the mentioned commit refactoring a bit by introducing
the dtsi_include_list variable and changing cmd_dtc to loop over that
was fine.
However, the .dtsi files mentioned in CONFIG_DEVICE_TREE_INCLUDES are
not supposed to be generated via the build system. They are meant for
e.g. including a public key for verified boot (generated with the
key2dtsi script), or for injecting some stuff to the /config
node (say, a bootcmd or a load-environment setting or things like
that). The files can either live in-tree in a private branch or
completely outside, e.g. in some Yocto metadata.
But regardless, U-Boot's build system will never know anything about
them, so when the mentioned commit did
dtsi_include_list_deps = $(addprefix $(obj)/,$(subst $(quote),,$(dtsi_include_list)))
things broke, because if CONFIG_DEVICE_TREE_INCLUDES is for example
"/path/to/public_key.dtsi", this would add a dependency on
$(obj)//path/to/public_key.dtsi to each $(obj)/*.dtb target, yielding
make[3]: *** No rule to make target 'arch/arm/dts/imx6dl-aristainetos2c_7.dtb', needed by 'dtbs'. Stop.
To fix that while preserving the introduced
CONFIG_EFI_CAPSULE_ESL_FILE behaviour, disentangle
CONFIG_DEVICE_TREE_INCLUDES from dtsi_include_list from which
dtsi_include_list_deps is built, and instead just add the items
directly to the $(foreach) loop.
Fixes: a958988b62 ("scripts/Makefile.lib: Add dtsi include files as deps for building DTB")
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Tested-by: Emil Kronborg <emil.kronborg@protonmail.com>
Some versions of KVM don't allow access to the cycle CSR.
Provide a command 'exception rdcycle' for testing.
If the cycle CSR is accessible, we get an output like:
=> exception rdcycle
cycle = 0x41f7563de
If the cycle CSR is not accessible, we get an output like:
=> exception rdcycle
Unhandled exception: Illegal instruction
Put subcommands into alphabetical order in long help.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
If an exception occurs in main U-Boot, show the registers. This makes
analyzing crashes especially in external applications easier.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
To minimize SPL size it is reasonable to disable SHOW_REGS. For main U-Boot
the size restrictions are much more relaxed.
* Provide separate Kconfig symbols for SPL and main U-Boot.
* Add a help text.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The CONFIG_SPL_FRAMEPOINTER symbol is only relevant in SPL.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Ben Dooks <ben.dooks@codethink.co.uk>
These seem to be missing, and trying to build fastboot cmd without
them is causing errors due to these being missing.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Tested-by: E Shattow <lucent@gmail.com
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
For the Milk-V Mars CM (lite) we have only been copying sizeof(void *)
bytes to the compatible property instead of the whole string list.
Fixes: de3229599d4f ("board: add support for Milk-V Mars CM")
Reported-by: E Shattow <lucent@gmail.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The existing code is unnecessarily convoluted:
Arrays __prci_init_clocks_fu[5|7]40 are initialized with data.
In separate includes fu[5|7]40-prci.h the size of the arrays is provided as
constants.
By moving the structures prci_clk_fu[5|7]40 to the respective code modules
we can directly use ARRAY_SIZE() to access the size of the data used for
initialization.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
If multiple messages are written, line-feeds improve the readability.
Fixes: c40b6df87fc0 ("clk: Add SiFive FU540 PRCI clock driver")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Since commit 37e50627efac ("ARM: dts: imx: Convert i.MX8M flash.bin
image generation to binman") the imx8mq-evk fails to boot:
U-Boot SPL 2024.10-rc4 (Sep 09 2024 - 16:08:22 -0300)
PMIC: PFUZE100 ID=0x10
SEC0: RNG instantiated
Normal Boot
Trying to boot from MMC2
Fix it by passing the offset property for the FIT image, just like
it is done on i.MX8MM.
Fixes: 37e50627efac ("ARM: dts: imx: Convert i.MX8M flash.bin image generation to binman")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Marek Vasut <marex@denx.de>
