Some header files included on the host are moving to use abuf, so adjust
the header-inclusion to bring in size_t correctly.
Signed-off-by: Simon Glass <sjg@chromium.org>
In many cases it is useful to get the address of a buffer, e.g. when
booting from it. Add a function to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
We want to encourage people to use an allocated bloblist since it is
more flexible than a fixed one. Make this the default, being sure not to
change existing users.
The unit tests require BLOBLIST_FIXED so add a dependency in the
Makefile to avoid build errors.
All sandbox builds require BLOBLIST_FIXED so make that the default for
sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
VBE uses a crc8 checksum to verify that the nvdata is valid, so make
sure it is available if VBE is enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
With VBE we want to use FIT in all phases of the boot. Add Kconfig
options to support this.
Disable the options for sandbox_vpl for now.
Signed-off-by: Simon Glass <sjg@chromium.org>
The variable 'ret' is defined twice, which is not intended. This may
have been a local merge error.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 2eefeb6d893 ("spl: Report a loader failure")
U-Boot uses ulong for addresses. It is confusing to use uintptr_t in a
few places, since it makes people wonder if the types are compatible.
Change the few occurences in SPL to use ulong
Signed-off-by: Simon Glass <sjg@chromium.org>
The current check looks only at SPL, but TPL or VPL might have a
different setting. Update the condition.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current check looks only at SPL, but TPL or VPL might have a
different setting. Update the condition.
Signed-off-by: Simon Glass <sjg@chromium.org>
If a loader returns an error code it is silently ignored. Show a message
to at least provide some feedback to the user.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some code has crept in which ignores this parameter. Fix this and add a
little debugging.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: b1307f884a9 ("fit: Support compression for non-kernel components (e.g. FDT)")
The name of the bootdev device is not that important, particular in SPL.
Save a little code space by using a simpler name.
Signed-off-by: Simon Glass <sjg@chromium.org>
When the best-match feature fails to find something, use the provided
config name as a fallback. The allows SPL to select a suitable config
when best-match is enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
The for() loop ends up being in the code even if the log_debug() does
nothing. Add a condition to fix this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
For new PowerPC developments, it will be useful to borrow devicetrees
from Linux. This patch makes it possible.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
In generic_phy_get_bulk(), if 'phys' property is absent in
the device node then it is not an error condition.
Change print message verbosity to debug to avoid spamming
console in such cases.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The current value of CONFIG_FASTBOOT_BUF_ADDR is incorrect for hardware
with 512MB and 1GB of RAM. The RAM address ranges for these devices are:
- 512MB:
- Start: 0x80000000
- End: 0xA0000000
- 1GB:
- Start: 0x80000000
- End: 0xC0000000
The current buffer address makes fastboot downloads work only on
hardware with 2GB of RAM.
To fix this issue:
1. Lower CONFIG_FASTBOOT_BUF_ADDR to 0x88200000. This makes the buffer
to be equal ot CONFIG_SYS_LOAD_ADDR, which is a safe address to
download files using fastboot.
2. Reduce the size of the download buffer to 128MB, avoiding overlaps
with RAMDISK_ADDR_R. This is a good enough value for individual
downloads.
These changes make fastboot downloads work with 512MB and 1GB devices.
Fixes: defe30a78b76 ("verdin-am62: add DFU, USB and UUU fastboot support")
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Support of legacy 64-bit entry point was already present when booting a bzimage
with 'zboot' but not supported with 'bootm' when the x86_64 Linux kernel is
embedded in a FIT image.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Evgeny Bachinin <EABachinin@salutedevices.com> says:
This patch-set repairs ability to use sandbox with CONFIG_OF_EMBED=y.
For now, to use OF_EMBED, the following must be done
1) sandbox64_defconfig should have:
```
-CONFIG_OF_LIVE=y
+CONFIG_OF_EMBED=y
```
2) On sandbox when CONFIG_OF_EMBED=y, the u-boot process can't start
due to:
```
Bloblist at b000 not found (err=-2)
initcall failed at call 000000000011829c (err=-2: No such file or \
directory)
### ERROR ### Please RESET the board ###
```
So, it is natural desire to disable CONFIG_BLOBLIST just to test
sandbox with OF_EMBED=y (disable it one way or another):
```
config SANDBOX
- select BLOBLIST
+ select BLOBLIST if SOME_NON_EXISTING_OPTION
```
3) As a result, having such changes (CONFIG_OF_EMBED=y &&
CONFIG_BLOBLIST=n) leads to the link & run-time errors, being fixed
by this patch series.
Link: https://lore.kernel.org/r/20241202-sandbox_repair_of_embed-v1-0-05aff4b0ccf7@salutedevices.com
[trini: The final patch is dropped as no longer relevant with Simon's
rework to that function which is now applied.]
This series is from Simon Glass <sjg@chromium.org>.
It first corrects the test for checking if a bloblist could have come
from TPL and so we check for a device tree, and then changes the
argument order for board_fdt_blob_setup() to be more inline with our
usual argument ordering.
Link: https://lore.kernel.org/r/20241102174944.412088-1-sjg@chromium.org
Having CONFIG_OF_EMBED=y && CONFIG_BLOBLIST=n leads to the link
error:
```
ld: /tmp/ccwtRVty.ltrans28.ltrans.o:(.data.rel+0x4b0): undefined \
reference to `do_ut_bloblist'
```
Fixes: 6ea5df39e8d ("test: Only enable bloblist test when supported")
Signed-off-by: Evgeny Bachinin <EABachinin@salutedevices.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Having CONFIG_OF_EMBED=y && CONFIG_BLOBLIST=n leads to the link
error:
```
ld: /tmp/ccRVty.ltrans40.ltrans.o: in function `lib_test_is_enabled':
test/lib/kconfig.c:24: undefined reference to \
`invalid_use_of_IF_ENABLED_INT'
ld: test/lib/kconfig.c:26: undefined reference to \
`invalid_use_of_CONFIG_IF_ENABLED_INT'
```
Fixes: 29784d62ede ("test: Add some tests for kconfig.h")
Signed-off-by: Evgeny Bachinin <EABachinin@salutedevices.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Having CONFIG_OF_EMBED=y && CONFIG_BLOBLIST=n leads to the link
error:
```
ld: /tmp/ccwtRVty.ltrans0.ltrans.o: in function `state_uninit':
arch/sandbox/cpu/state.c:508: undefined reference to `bloblist_finish'
```
Fixes: 1c52fcca72b ("sandbox: Write out bloblist when exiting")
Signed-off-by: Evgeny Bachinin <EABachinin@salutedevices.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This returns a devicetree and updates a parameter with an error code.
Swap it, since this fits better with the way U-Boot normally works. It
also (more easily) allows leaving the existing pointer unchanged.
No yaks were harmed in this change, but there is a very small code-size
reduction.
For sifive, the OF_BOARD option must be set for the function to be
called, so there is no point in checking it again. Also OF_SEPARATE is
defined always.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
[trini: Update total_compute]
Signed-off-by: Tom Rini <trini@konsulko.com>
The condition for receiving a bloblist from TPL is reversed. This was
only noticed are the other fixes landed. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
The FIT name in RISC-V Falcon mode should be different from that in
normal boot mode; it is called linux.itb. If the setting is missing
in common/spl, the normal boot file name will be used.
Signed-off-by: Randolph <randolph@andestech.com>
Add document for Banana Pi F3 board which based on SpacemiT's K1 SoC.
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Signed-off-by: Huan Zhou <pericycle.cc@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Add basic support for SpacemiT's Banana Pi F3 board.
Update the k1.dtsi align with mainline.
Note that the device tree files follow the mainline Linux source[1].
Links: https://patches.linaro.org/project/linux-serial/patch/20240730-k1-01-basic-dt-v5-8-98263aae83be@gentoo.org/ [1]
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Signed-off-by: Huan Zhou <pericycle.cc@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Enable driver for DesignWare MSHC. TH1520 supports all
speed modes up to HS400ES and UHS SDR105.
Also enable ADMA and mmc command.
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Add SDHCI and EMMC controlles nodes on TH-1520 SoC. And enable them for
Lichee module 4A.
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Add support for DesignWare SDHCI host controller on Alibaba TH1520 SoC
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The imply statements should be sorted in the sequence
of appearance in .config.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Get product ID and the other information from EEPROM, use them to select
the correct DTB.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
The prefix "SPL_" is not needed when using CONFIG_IS_ENABLED().
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Fixes: 5ecf9b0b8a75 ("board: starfive: add StarFive VisionFive v2 board support")
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Support multiple DTBs for JH7110 based boards, so they can
select the correct DT at runtime.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Reviewed-by: E Shattow <lucent@gmail.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
So JH7110 based boards can select their own DT at runtime.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Reviewed-by: E Shattow <lucent@gmail.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
As OF_UPSTREAM is implemented, these code are redundant.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
