The lowlevel debug with CONFIG_DEBUG_UART has printascii for string
print, and no need to convert to use printch now.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Usually ARMv8 platforms allow unaligned access for Normal memory. But
some chips might not allow it by default, having SCTLR.A bit set to 1
before U-Boot execution. One such example is Exynos850 SoC. As
allow_unaligned() is not implemented for ARMv8 at the moment, its __weak
implementation is used, which does nothing. That might lead to unaligned
access abort, for example when running EFI selftest. Fix that by
implementing allow_unaligned() for ARMv8.
The issue was found when running EFI selftest on E850-96 board
(Exynos850 based):
=> bootefi selftest $fdtcontroladdr
...
Executing 'HII database protocols'
"Synchronous Abort" handler, esr 0x96000021, far 0xbaac0991
...
resetting ...
Unaligned abort happens in u16_strnlen(), which is called from
efi_hii_sibt_string_ucs2_block_next():
u16_strlen(blk->string_text)
where 'blk' type is struct efi_hii_sibt_string_ucs2_block. Because this
struct is packed, doing "->string_text" makes 'blk' address incremented
by 1 byte, which makes it unaligned. Although allow_unaligned() was
called in efi_init_early() before EFI selftest execution, it wasn't
implemented for ARMv8 CPUs, so data abort happened.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Some of the bootm tests rely on state that is assumed to be
correct but is changed by the tests. This means that running
'ut bootm' twice will result in failures on the second run
as the state left by the first run is not what the tests
expect.
Fix this by ensuring the state is as expected by explicitly
setting that state.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
We are about to add a large number of new entries. Update the prefix to
be a little shorter.
For SMBIOS items, use SYSID_SM_ (for System Management) which is enough
to distinguish it. For now at least, it seems that most items will be
for SMBIOS.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Raymond Mao <raymond.mao@linaro.org>
When compiling with X86EMU_DEBUG, the compiler complains that debug.c misses
two include files. Fix that.
Signed-off-by: Yuri Zaporozhets <yuriz@qrv-systems.net>
Currently the PM_{inp,outp}* macros are completely broken on non-x86 architectures,
because they will essentially access random memory locations if called (and produce
a lot of rightful compilation warnings too). For now, replace those macros with
warnings (until the code is fixed), so the user at least knows that the emulator
attempted to access some x86 I/O port.
Signed-off-by: Yuri Zaporozhets <yuriz@qrv-systems.net>
These fields are currently set on exactly two platforms today, and used
by only one of them. Update pic32mzdask to use CFG_SYS_SRAM* in the one
location it needs it and otherwise drop this field from the bd_info
struct.
Signed-off-by: Tom Rini <trini@konsulko.com>
We don't have audio support in U-Boot, but we do have boot menus. Add an
option to re-map the volume and power buttons to up/down/enter so that
in situations where these are the only available buttons (such as on
mobile phones) it's still possible to navigate menus built in U-Boot or
an external EFI app like GRUB or systemd-boot.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Rasmus Villemoes <ravi@prevas.dk> says:
Doing bringup of a board, part of my bootstrap logic is in U-Boot. So
when tweaking that logic, I was bitten by a previous completed
bootstrap having left a copy of the environment on the device, which
was imported and thus overrided the new logic.
So I thought, "ok, I'll just make sure to put 'env default -a' as the
first part of the bootstrap logic so I'm not bitten again". Alas, my
logic also relies on certain variables that are set by C code
(e.g. for detecting board variant), and doing 'env default -a' also
eliminates those.
Looking around, the hashtab code already supports a flag that does
exactly what I need, and exposing that is (morally) a one-liner.
Link: https://lore.kernel.org/r/20241030213404.2894247-1-ravi@prevas.dk
Check that the new -k flag works as expected.
This also adds a test of the -a flag, which was previously missing,
and as the comment says, perhaps for a good reason. At least now we
have a test for it in combination with -k (and -f, because the ethaddr
variables otherwise cause complaining).
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Instead of testing the same expected behaviour for both
non_default_varX, test that when var1 is not in the default env but is
mentioned in the "env default" cmdline, it is removed, while var2 is
untouched.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
It can be useful to set all variables defined in the default
environment to the value they have there, but without removing
variables that are only defined at runtime. This can sort-of be done
today, by using the "env default var1 var2 ..." variant, but that
requires listing all variables defined in the default
environment. It's much more convenient to be able to say
env default -k -a
The -k flag is also meaningful in the other case: If var1 is not
defined in the default environment, but var2 is,
env default var1 var2
would emit a warning about var1 not being in the default env and thus
being deleted. With -k, there's no warning, and var1 is kept as-is.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
- drop A1 dtsi and other bindings includes in favor of Upstream ones
-----BEGIN PGP SIGNATURE-----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=1dBl
-----END PGP SIGNATURE-----
Merge tag 'u-boot-amlogic-next-20241113' of https://source.denx.de/u-boot/custodians/u-boot-amlogic into next
- khadas-vim3{l}: fix userdata size for android config
- drop A1 dtsi and other bindings includes in favor of Upstream ones
For Amlogic A1, we have to use dtsi from dts/upstream folder.
The only difference between this two files is the added cpu temperature
node definition in upstream version and additional assigned-clock for
USB. This patch is tested on a device with A113L SoC (AD401-like) and
everything is okay.
So, we can remove legacy arch/arm/dts/meson-a1.dtsi file.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Link: https://lore.kernel.org/r/20241112125836.3239832-2-avromanov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Janne Grunau <j@jannau.net> says:
The changes in "Make LMB memory map global and persistent" [1] break
mapping DMA memory in the USB xHCI driver when using the apple_dart
iommu present on Apple silicon systems.
The IOVA space used by the u-boot driver (low 4GB) and physical memory
do not overlap. The physical memory on this systems starts depending on
the SoC either at 0x10_0000_0000 or 0x100_0000_0000. It make no sense to
manage these distinct regions in a single LMB map. In addition every
device has its own iommu and IO address space so sharing a single memory
map between all iommu instances is not necessary.
To fix this issue restore the used subset (add, alloc and free) of the
previous pointer based LMB interface with "io_" as prefix.
To ensure that low level lmb functions do not use the global LMB
variable reorder lib/lmb.c so that the variable is not visible.
Tested with patches from my "Fix device removal order for Apple dart
iommu" series [2] to fix a separate issue.
The cosmetic commit has two checkpatch warnings in existing code which I
ignored.
[1] https://lore.kernel.org/u-boot/20240826115940.3233167-1-sughosh.ganu@linaro.org/
[2] https://lore.kernel.org/u-boot/20241031-iommu_apple_dart_ordering-v1-0-8a6877946d6b@jannau.net/
Link: https://lore.kernel.org/r/20241111-io_lmb_apple_dart_iommu-v3-0-32c05da51d72@jannau.net
Signed-off-by: Tom Rini <trini@konsulko.com>
There is no overlap between the IOVA space managed by the iommu (here
the 32-bit address space) and physical RAM on Apple silicon systems. The
RAM starts at 0x10_0000_0000 or 0x100_0000_0000 so it's not possible to
manage the IOVA with the global memory LMB and use 1:1 translation.
In addition each device has its own iommu and does not need to share the
address space with all other devices. This should not be problem for
u-boot's limited use and hardware support.
Restore the private per instance LMB IOVA map.
Fixes: ed17a33fed2 ("lmb: make LMB memory map persistent and global")
Signed-off-by: Janne Grunau <j@jannau.net>
These functions can be used with struct lmb pointers and will be used to
manage IOVA space in the apple_dart iommu driver. This restores part of
the pointer base struct lmb API from before commit ed17a33fed29 ("lmb:
make LMB memory map persistent and global").
io_lmb_add() and io_lmb_free() can trivially reuse exisiting lmb
functions. io_lmb_setup() is separate for unique error log messages.
io_lmb_alloc() is a simplified copy of _lmb_alloc_base() since the
later has unused features and internal use of the global LMB memory map.
Signed-off-by: Janne Grunau <j@jannau.net>
Low lovel LMB functionality will be used to manage IOVA space in the
Apple dart iommu driver. This reordering ensures that those function
can not access the global LMB memory map variable.
Signed-off-by: Janne Grunau <j@jannau.net>
It will be re-used with a lmb list pointer as argument for IOVA
allocations in the apple_dart iommu driver.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Janne Grunau <j@jannau.net>
If TPL_GPIO and TPL_PINCTRL_ROCKCHIP are enabled and a sysreset-gpio is
provided in the TPL Device Tree, this will trigger a system reset
similar to what's currently been done in SPL whenever the RK3399 "warm"
boots. Because there's currently only one user of sysreset-gpio logic,
and TPL is enabled on that board, so let's migrate the logic and that
board to do it in TPL.
There are three reasons for moving this earlier:
- faster boot time as we don't need to reach SPL to be able to reset the
system on a condition we know is already met in TPL,
- have less code to be impacted by the issue this system reset works
around (that is, "unclean" SoC registers after a reboot),
- less confusion around the reason for restarting. Indeed when done from
SPL, the following log can be observed:
"""
U-Boot TPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45)
Channel 0: DDR3, 666MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
Channel 1: DDR3, 666MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45 +0100)
Trying to boot from MMC2
U-Boot TPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45)
"""
possibly hinting at an issue within the SPL when loading the fitImage
from MMC2 instead of the normal course of events (a system reset).
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This defines a weak tpl_board_init function that can be used for running
board/SoC-specific code before the DRAM init happens, similarly to
spl_board_init() for SPL.
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
To prepare to support forcing power on reset from TPL which would have
the exact same logic, just in an earlier stage, let's merge the CRU
check that triggers the power on reset with the rest of the logic.
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
A later commit will make use of the pinctrl driver in TPL so let's add
the ability to build the Rockchip pinctrl driver in TPL.
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Disable DISPLAY_BOARDINFO_LATE as the early boardinfo print of Model
should be enough.
U-Boot 2025.01-rc1 (Nov 02 2024 - 16:04:16 +0000)
Model: Generic RK3566/RK3568
DRAM: 8 GiB (effective 7.7 GiB)
Core: 250 devices, 24 uclasses, devicetree: separate
MMC: mmc@fe2b0000: 1, mmc@fe310000: 0
Loading Environment from nowhere... OK
In: serial@fe660000
Out: serial@fe660000
Err: serial@fe660000
Model: Generic RK3566/RK3568
Hit any key to stop autoboot: 0
=>
Enable CMD_MISC to make it easier to inspect data in OTP.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The FriendlyElec NanoPi R2S Plus is a single-board computer based on
Rockchip RK3328 SoC. It features e.g. 1 GB DDR4 RAM, 32 GB eMMC,
SD-card, 2x GbE LAN, optional M.2 SDIO Wi-Fi and 2x USB 2.0 host.
Features tested on a NanoPi R2S Plus 2309:
- SD-card boot
- eMMC boot
- Ethernet
- USB gadget
- USB host
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The R2S Plus is basically an R2S with additional eMMC.
The eMMC configuration for the DTS has been extracted and copied from
rk3328-nanopi-r2.dts, v2017.09 branch from the friendlyarm/uboot-rockchip
repository.
Signed-off-by: Sergey Bostandzhyan <jin@mediatomb.cc>
Link: https://lore.kernel.org/r/20240814170048.23816-2-jin@mediatomb.cc
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: b8c02878292200ebb5b4a8cfc9dbf227327908bd ]
(cherry picked from commit c9bf98827964441f4dd16faa45bd4046f472e693)
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add support for Cool Pi GenBook, it works as a carrier board
connect with CM5 SOM.
Specification:
- Rockchip RK3588
- LPDDR5X 8/32 GB
- eMMC 64 GB
- HDMI Type A out x 1
- USB 3.0 Host x 1
- USB-C 3.0 with DisplayPort AltMode
- PCIE M.2 E Key for RTL8852BE Wireless connection
- PCIE M.2 M Key for NVME connection
- eDP panel with 1920x1080
Tested by Armbian boot on USB disk.
Change-Id: I4d9b8572dc7c400077dde666633f3fea1b47dd03
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Some board may want to have a different boot priority(a laptop
may want to usb has the highest boot priority for third-part
os installation). So let the board can define it's own
boot_targets.
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Cool Pi CM5 GenBook works as a carrier board connect with CM5 [0].
Specification:
- Rockchip RK3588
- LPDDR5X 8/32 GB
- eMMC 64 GB
- HDMI Type A out x 1
- USB 3.0 Host x 1
- USB-C 3.0 with DisplayPort AltMode
- PCIE M.2 E Key for RTL8852BE Wireless connection
- PCIE M.2 M Key for NVME connection
- eDP panel with 1920x1080
This patch add basic support to bringup eMMC/USB HOST/WiFi/TouchPad/
Battery/PCIE NVME, and can also drive a HDMI output with out of tree
hdmi patches.
[0] https://www.crowdsupply.com/shenzhen-tianmao-technology-co-ltd/genbook-rk3588
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20240730102433.540260-3-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 4a8c1161b843c366776fc872a6fe45b743b2983e ]
(cherry picked from commit dc6316da23734d9321e09f8c8a7669f4b4cb9f75)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Qnap TS433 is a 4-bay NAS based around the RK3568.
Two SATA bays are connected to the RK3568's own SATA controllers while
the other two are connected to a JMicron SATA controller living on the
PCIe bus.
It provides one 2.5Gb and one 1Gb ethernet port as well as 3 usb ports.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
adds new SPI bus flags, but also introduces a completely new set of
SPI bus flags in another location. The existing flags field is type
u8, while the new separate flags are BIT(8) and higher. Use of those
new flags triggers integer overflow.
Drop the newly introduced flags which were never used anywhere in the
code. Move the one remaining flag which was used in the correct place
and change it from BIT(8) to BIT(6) so it fits the u8 flags.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Addresses-Coverity-ID: 510804 Extra high-order bits
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
For upstream Linux kernel we use below DTBs for HiHope boards:
- r8a774a1-hihope-rzg2m-ex.dtb
- r8a774e1-hihope-rzg2h-ex.dtb
- r8a774b1-hihope-rzg2n-ex.dtb
Update the CONFIG_OF_LIST to match the above. Now that we have switched
upstream DTS, drop deleting the nodes and also rename the
r8a774*-u-boot.dtsi files to r8a774*-ex-u-boot.dtsi to match the OF_LIST
files so that the `bootph-all` property gets applied to required nodes
in upstream DTS.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Currently we set CONFIG_SYS_MMC_ENV_DEV=1 which is wrong:
Loading Environment from MMC... MMC: no card present
*** Warning - No block device, using default environment
This issue was introduced when we switched to using upstream Linux device
trees for the hihope boards which named the MMC devices differently.
Correct to dev 0 so that the U-Boot environment can be loaded from the
correct storage device.
Fixes: 18fb23b13158 ("ARM: dts: renesas: Switch to using upstream DT on 64bit Renesas SoCs")
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
When support for the Renesas RZ/G2L SoC was added, the GICR base address
for CPU1 was accidentally used. We should instead supply the GICR base
address for CPU0 so that interrupts are correctly configured for the
CPU core that U-Boot is actually using.
Fixes: 387d4275ab0e ("arm: rmobile: Add basic RZ/G2L family support")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
We are now using the dts/upstream subtree for the RZ/G2L SoC family so
we can drop unused dt-bindings headers.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
We are now using the dts/upstream subtree for the RZ/G2L SoC family so
we can drop unused devicetree files from arch/arm/dts.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
We are now using the dts/upstream subtree for the RZ/G2L SoC family, so
update the board MAINTAINERS file to match rz-smarc dtsi files in this
subtree.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/23262
- Improve imx9 boot medium autodection.
- Add possibility to skip DCD on i.MX8.
- Switch to using upstream DT on DH i.MX6 DHCOM.
- Add support for i.MX6DL DHCOM SoM on PDK2 carrier board.
- Handle FIELD_RETURN on i.MX HAB.
Documentation:
* correct title and author of rst2pdf generated pdf
* describe CONFIG_DEBUG_SBI_CONSOLE
* remove vile language
UEFI
* correct printf codes in mkeficapsule
* add an EFI test app
* move default filename to a function
* move get_efi_pxe_arch() to efi_helper
* allow reporting the host defaults in efidebug
* drop sandbox PXE architecture
Other:
* do not reserve extra 16 KiB of stack in lmb
* disable the sandbox virtio blk device
* provide -N command line flag to control EFI default boot file name
on the sandbox
* provide a unit test for the efi bootmeth
-----BEGIN PGP SIGNATURE-----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=8H9E
-----END PGP SIGNATURE-----
Merge tag 'efi-2025-01-rc2-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2025-01-rc2-2
Documentation:
* correct title and author of rst2pdf generated pdf
* describe CONFIG_DEBUG_SBI_CONSOLE
* remove vile language
UEFI
* correct printf codes in mkeficapsule
* add an EFI test app
* move default filename to a function
* move get_efi_pxe_arch() to efi_helper
* allow reporting the host defaults in efidebug
* drop sandbox PXE architecture
Other:
* do not reserve extra 16 KiB of stack in lmb
* disable the sandbox virtio blk device
* provide -N command line flag to control EFI default boot file name
on the sandbox
* provide a unit test for the efi bootmeth
Working with HAB on the i.MX8MP we've encountered a case where a board
that successfully authenticates u-boot when booting Linux subsequently
fails to properly bring up the RTC.
The RTC registers live in the low-power block of the Secure Non-Volatile
Storage (SNVS) block.
The root cause of the error has been traced to the HAB handing off the
SNVS-RTC in a state where HPCOMR::NPSWA_EN = 0 in other words where the
Non-Privileged Software Access Enable bit is zero.
Configure SNVS to allow unpriv access to SNVS LP for imx8m and imx8mp.
This commit generalizes 723f8359c1 ("imx: mx7: snvs: Add an SNVS init
routine") to also be used on i.MX8M SoCs, and was testeed on i.MX8MP.
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Commit 723f8359c1 ("imx: mx7: snvs: Add an SNVS init routine") noted
that the init_snvs() call likely applies to other i.MX processors, and
this has been found to be true for i.MX8MP.
Move snvs module for future re-use.
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Enable OF_UPSTREAM to use upstream DT and add nxp/imx/ prefix to the
DEFAULT_DEVICE_TREE. And thereby directly build DTB from dts/upstream/src/
including *-u-boot.dtsi files from arch/$(ARCH)/dts/ directory.
Signed-off-by: Marek Vasut <marex@denx.de>
Add support for the DH electronics i.MX6DL DHCOM SoM and a PDK2 evaluation
board. The evaluation board features three serial ports, USB OTG, USB host
with an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, analog audio,
PCIe and HDMI video output.
All of the aforementioned features except for mSATA are supported, mSATA
is not available on i.MX6DL and is only available on DHCOM populated with
i.MX6Q SoC which is already supported upstream.
Backport from linux-next commit
c3f5d76a6e03 ("ARM: dts: imx6dl: Add support for i.MX6DL DHCOM SoM on PDK2 carrier board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
