Enable dynamic settings to mmcdev and mmcroot for i.MX8MQ-EVK
Since we are here, clean up the including headers
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Simon Glass <sjg@chromium.org> says:
This series provides a way to keep track of the images used in bootstd,
including the type of each image.
At present this is sort-of handled by struct bootflow but in quite an
ad-hoc way. The structure has become quite large and is hard to query.
Future work will be able to reduce its size.
Ultimately the 'bootflow info' command may change to also show images as
a list, but that is left for later, as this series is already fairly
long. So for now, just introduce the concept and adjust bootstd to use
it, with a simple command to list the images.
This series includes various alist enhancements, to make use of this new
data structure a little easier.
[trini: Drop patch 18 and 19 for now due to size considerations]
Link: https://lore.kernel.org/r/20241115231926.211999-1-sjg@chromium.org
Add a new 'bootstd images' command, which lists the images which have
been loaded.
Update some existing tests to use it. Provide some documentation about
images in general and this command in particular.
Use a more realistic kernel command-line to make the test easier to
follow.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a file-type parameter to this function and update all users. Add a
proper comment to the function which we are here.
This will allow tracking of the file types loaded by the extlinux
bootmeth.
Signed-off-by: Simon Glass <sjg@chromium.org>
We want to record the type of each file which is loaded. Add an new
parameter for this, to the read_file() method. Update all users.
Make bootmeth_common_read_file() store information about the image that
is read.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The efiload_read_file() does similar things to a common function, so
update it to use that instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
As a first step to recording images and where they came from, update
this function to do so, since it is used by two bootmeths
Create a helper function in the bootflow system, since recorded
images are always associated with bootflows.
Signed-off-by: Simon Glass <sjg@chromium.org>
We want to keep track of images which are loaded, or those which could
perhaps be loaded. This will make it easier to manage memory allocation,
as well as permit removal of the EFI set_efi_bootdev() feature.
Add a list of these, attached to the bootflow. For now the list is
empty.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use an alist for this data structure as it is somewhat simpler to
manage. This means that bootstd holds a simple list of bootflow structs
and can drop it at will, without chasing down lists.
Signed-off-by: Simon Glass <sjg@chromium.org>
This list is only used by two functions, which can be updated to iterate
through the global list. Take this approach, which allows the bootdev
list to be dropped.
Overall this makes the code slightly more complicated, but will allow
moving the bootflow list into an alist
Signed-off-by: Simon Glass <sjg@chromium.org>
Provide a function which is safe to call in the 'unbind' path, which
returns the bootstd priv data if available.
Signed-off-by: Simon Glass <sjg@chromium.org>
This relates to more than just the bootdev, since there is a global list
of bootflows. Move the function to the bootstd file and rename it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
This relates to more than just the bootdev, since there is a global list
of bootflows. Move the function to the bootstd file and rename it.
Signed-off-by: Simon Glass <sjg@chromium.org>
The maximum frequency of the A53 CPU on the AM62P depends on the speed
grade of the SoC. This value is hardcoded in the DT for all AM62P
variants, potentially causing specifications to be exceeded. Moreover,
setting a common lower frequency for all variants increases boot time.
To prevent these issues, modify the DT at runtime from the R5 core to
adjust the A53 CPU frequency.
Signed-off-by: Aparna Patra <a-patra@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
AM62P SoC has multiple speed grades. Add function to delete
non-relevant CPU frequency nodes, based on the information
retrieved from hardware registers. Fastest grade's maximum
frequency also depends on PMIC voltage, hence to simplify
implementation use the smaller value.
Signed-off-by: Aparna Patra <a-patra@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Read the max temperature for the SoC temperature grade from the hardware
and modify the critical trip nodes on each thermal zone of FDT at
runtime so they are correct with the hardware value for its grade.
Signed-off-by: Aparna Patra <a-patra@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
AM62P SOC is available in multiple variants:
-CPU cores (Cortex-A) AM62Px1 (1 core),
AM62Px2 (2 cores), AM62Px4 (4 cores)
-With and without CAN-FD & Video-codec support
Remove the relevant FDT nodes by reading the actual configuration
from the SoC registers, with that change it is possible to have a single
dts/dtb file handling the different variant at runtime.
Signed-off-by: Aparna Patra <a-patra@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
As there are few redundant functions in board/ti/*/evm.c files, pull
them to a common location of access to reuse and include the common file
to access the functions.
Call k3-ddrss driver through fixup_ddr_driver_for_ecc() to fixup the
device tree and resize the available amount of DDR, if ECC is enabled.
Otherwise, fixup the device tree using the regular
fdt_fixup_memory_banks().
Also call dram_init_banksize() after every call to
fixup_ddr_driver_for_ecc() is made so that gd->bd is populated
correctly.
Ensure that fixup_ddr_driver_for_ecc() is agnostic to the number of DDR
controllers present.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Set CONFIG_NR_DRAM_BANKS to 2 as we have two banks described in the
memory/ node for lower and higher addressible DDR regions.
This allows use of FDT functions from fdt_support.c to set up and fix up
the memory/ node correctly.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
The functionality of enabling Inline ECC is now controlled by
CONFIG_K3_INLINE_ECC. So, remove the support for 'ti,ecc-enable'
property to avoid redundancy and to ensure the Inline ECC feature is
mananged through build-time config.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Add CONFIG_K3_INLINE_ECC so that ECC functions can be compiled into R5 SPL
only when the config has been enabled.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Enable ECC 1-bit error, 2-bit error, multiple 1-bit error interrupts
by setting the respective bits in the DDRSS_V2A_INT_SET_REG register.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Setup the ECC region's start and range using the device private data,
ddrss->ddr_bank_base[0] and ddrss->ddr_ram_size. Also, move start and
range of ECC regions from 32 bits to 64 bits to accommodate for
DDR greater than or equal to 4GB.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
As R5 is a 32 bit processor, the RAM banks' base and size calculation
is restricted to 32 bits, which results in wrong values if bank's base
is greater than 32 bits or bank's size is greater than or equal to 4GB.
So, add k3_ddrss_ddr_bank_base_size_calc() to get the base address and
size of RAM's banks from the device tree memory node, and store in a
64 bit device private data which can be used for ECC reserved memory
calculation, Setting ECC range and Fixing up bank size in device tree
when ECC is enabled.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
The 1-bit inline ECC support in TI's DDRSS bridge requires
the configured memory regions to be preloaded with a pattern
before use. This is done by the k3-ddrss driver from the
R5 SPL in a 'for' loop. It takes around 10 seconds to fill
2GB of memory, for example. Memset can cut the time in half
and using DMA currently yields a similar result.
The BIST engine of DDR controller provides support for
initializing any memory region with a pattern. This
bypasses the DDRSS bridge, so the required inline ECC
data is not computed and populated in the memory. For
some values like zero, the computed ECC syndrome is also
zero and we can use these values to preload the memory
from the DDR controller, without the assistance of the
bridge.
The registers involved in the process are described in the
'DDR controller registers' topic in [1] AM62 and [2] J721E
reference manuals.
The patch replaces the 'for' loop memory fill function with
the BIST memory initialization procedure. This cuts the time
to preload the 2GB memory from 10 seconds down to 1 second.
The bist preload function uses the lpddr4 APIs in the k3-ddrss,
so this is compatible with devices with both 16-bit LPDDR4 and
32-bit LPDDR4 interfaces (e.g J721E).
[1] AM62x: https://www.ti.com/lit/pdf/spruiv7
[2] DRA829/TDA4VM: https://www.ti.com/lit/zip/spruil1
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Add ss_cfg memory region which maps the DDRSS configuration region
for the memory controller node.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Tested-by: Neha Malcom Francis <n-francis@ti.com>
Dmitry Rokosov <ddrokosov@salutedevices.com> says:
This series consists of three patches.
The first patch modifies the function documentation style in the
include/fdt_support.h file to comply with kernel-doc requirements.
The second patch modifies the board_fdt_chosen_bootargs() function to
return a const char* type. This change clarifies to the caller that the
returned string should neither be freed nor modified. It aligns with the
existing fdt_setprop() function, which already utilizes a const char*
parameter. This promotes consistency within the codebase and enhances
code safety by preventing unintended modifications to the returned
string.
The third patch addresses the need for flexibility in providing kernel
command line arguments (bootargs) for different kernel images within the
same U-Boot environment. It introduces a read-only (RO) fdt_property
argument to the board_fdt_chosen_bootargs() function, allowing access to
the original chosen/bootargs data. This is crucial for scenarios where
different kernel versions require distinct console setups (e.g., ttyS0
for vendor kernels and ttyAML0 for upstream kernels). By enabling board
developers to either merge or replace the original bootargs, this
patch enhances the configurability of U-Boot for various kernel
images without relying on outdated configurations like CMDLINE_EXTEND.
CI/CD results: https://github.com/u-boot/u-boot/pull/716/checks
Link: https://lore.kernel.org/r/20241220-board_fdt_chosen_bootargs_improvements-v1-0-f6a7181787c5@salutedevices.com
Sometimes, it is necessary to provide an additional bootargs string to
the kernel command line.
We have a real scenario where one U-Boot blob needs to boot several
kernel images: the vendor-patched kernel image and the latest upstream
kernel image. The Amlogic (Meson architecture) tty driver has different
tty suffixes in these kernels: the vendor uses 'ttySx', while the
upstream implementation uses 'ttyAMLx'. The initial console setup is
provided to the kernel using the kernel command line (bootargs). For the
vendor kernel, we should use 'console=ttyS0,115200', while for the
upstream kernel, it must be 'console=ttyAML0,115200'. This means we have
to use different command line strings depending on the kernel version.
To resolve this issue, we cannot use the CMDLINE_EXTEND kernel
configuration because it is considered legacy and is not supported for
the arm64 architecture. CMDLINE_EXTEND is outdated primarily because we
can provide additional command line strings through the
'chosen/bootargs' FDT node. However, U-Boot uses this node to inject the
U-Boot bootargs environment variable content, which results in U-Boot
silently overriding all data in the 'chosen/bootargs' node. While we do
have the board_fdt_chosen_bootargs() board hook to address such issues,
this function lacks any FDT context, such as the original value of the
'chosen/bootargs' node.
This patch introduces a read-only (RO) fdt_property argument to
board_fdt_chosen_bootargs() to share the original 'chosen/bootargs' data
with the board code. Consequently, the board developer can decide how to
handle this information for their board setup: whether to drop it or
merge it with the bootargs environment.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
It should be structured this way to demonstrate to the caller that
freeing the return value is unnecessary and that the caller cannot
modify it.
The function fdt_setprop() includes a parameter with a const char*
prototype, so it is better to use the const qualifier.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
