Update the autogenerated LPDDR4 configuration using the latest available
SysConfig tool.
This changes are cosmetic and are made to track the last used tool version.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Marek Behún <kabel@kernel.org> says:
This series contains improvements for the 'eeprom' command:
- refactors
- fixes
- improvements
- ability to use driver model EEPROMs (uclass UCLASS_I2C_EEPROM)
- more flexible EEPROM layout support
It should not cause any behavior change for any existing board.
This series is a dependency for some DDR issue fixes for Turris Omnia.
I will be sending that one separately.
github PR link (with CI):
https://github.com/u-boot/u-boot/pull/540
- there is a failure for
test.py for sandbox sandbox_clang
but it seems unrelated to these changes
Extend the 'eeprom' command to allow accessing EEPROMs probed via
driver model, uclass UCLASS_I2C_EEPROM.
When the CONFIG_I2C_EEPROM config option is enabled (and so the
i2c-eeprom driver is built), the 'eeprom' command now accepts driver
model device name as EEPROM specifier for the 'eeprom' command, in
addition to the legacy [[bus] devaddr] specifier.
Moreover if no device specifier is given, then the first
UCLASS_I2C_EEPROM device is used, if found.
Signed-off-by: Marek Behún <kabel@kernel.org>
Don't read/write whole EEPROM if not necessary when printing / updating
EEPROM layout fields. Only read/write layout.data_size bytes.
Signed-off-by: Marek Behún <kabel@kernel.org>
Refactor the eeprom_execute_command() function into separate functions
do_eeprom_rw(), do_eeprom_print() and do_eeprom_update().
Signed-off-by: Marek Behún <kabel@kernel.org>
In preparation for allowing to access eeprom by driver-model device
name, refactor the eeprom device specifier parsing. Instead of filling
two parameters (i2c_bus, i2c_addr), the parsing function now fills one
parameter of type struct eeprom_dev_spec.
Signed-off-by: Marek Behún <kabel@kernel.org>
Add a new Kconfig option EEPROM_LAYOUT_VERSIONS, and hide eeprom
layout versionsing code behind it. Only print the relevant help in
'eeprom' command usage if this option is enabled.
Enable this new option for cm_fx6_defconfig and cm_t43_defconfig.
These are the only boards using EEPROM layout versioning.
Signed-off-by: Marek Behún <kabel@kernel.org>
The bus and devaddr arguments of the eeprom command are optional, and if
only one is given, it is assumed to be devaddr. Change the usage help
from
<bus> <devaddr>
to
[[bus] [devaddr]
Signed-off-by: Marek Behún <kabel@kernel.org>
The byte variable is of type unsigned char, it is never less than zero.
The error case is handled by *endptr, so drop the comparison altogether.
Signed-off-by: Marek Behún <kabel@kernel.org>
The __eeprom_field_update_bin() function is expected to parse a hex
string into bytes (potentially in reverse order), but the
simple_strtoul() function is given 0 as base. This does not work since
the string does not contain '0x' prefix. Add explicit base 16.
Signed-off-by: Marek Behún <kabel@kernel.org>
Split the eeprom layout field finding code from the
eeprom_layout_update_field() function in order to make it usable in
alternative implementations of update method.
Signed-off-by: Marek Behún <kabel@kernel.org>
Assign the default eeprom layout parameter .data_size and methods
.print() and .update() before calling eeprom_layout_assign() in
eeprom_layout_setup().
This allows eeprom_layout_assign() to overwrite these if needed.
Signed-off-by: Marek Behún <kabel@kernel.org>
Document the logic of when we do a full resync of the device trees used
by OF_UPSTREAM as well as that cherry-picking is allowed as needed.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
These sections which talk about the different phases of the development
process should be using the subsubheading identifier.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Stderr was missing from the initial description and example.
As I understand the env command documentation the subcommand style is
preferred, though the old format is still fully supported.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Reviewed-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
This adds details that I would have liked to have readily available,
in particular how to activate the network interface before enabling
netconsole, and how to integrate netconsole so you can use the U-Boot
prompt.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Reviewed-by: Tony Dinh <mibodhi@gmail.com>
Building the SPI flash DFU driver fails if SPI flash support is missing.
drivers/dfu/dfu_sf.c:123:29: error:
‘CONFIG_SF_DEFAULT_MODE’ undeclared (first use in this function);
Add the missing dependency.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240604054425.105902-1-heinrich.schuchardt@canonical.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
If the ep0 stalls or request are dequeued when gagdet is stopped,
the request dma may not be mapped yet and dwc3_flush_cache() may be
called with a NULL pointer.
Check req->request.dma before calling dwc3_flush_cache() and later
the usb_gadget_unmap_request() functions since it means that
usb_gadget_map_request() hasn't been called yet.
Fixes: fd15b58c1a9 ("dwc3: flush cache only if there is a buffer attached to a request")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240528-topic-sm8x50-dwc3-gadget-crash-fix-v1-1-58434ab4b3d3@linaro.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/20956
- Support different RAM sizes on imx8m phycoce boards.
- Support new toradex variants.
- Support Samsung 4GB DDR and Realtek RTL8211E PHY on imx8mm-cl-iot-gate.
- Convert imx8mm-phycore and imx8mp-phycore boards to use OF_UPSTREAM.
Newer versions of the imx8mm-cl-iot-gate boards may come populated with a
Samsung 4GB DDR model.
Add support for it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
make it possible to set the RAM timing frequency statically independent
from the RAM size. Fixed RAM timing frequency can be used while the
RAM size is still determined by the EEPROM image.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
We might not be able to always rely on the EEPROM introspection data.
So add a config option alternative which configures the RAM size
to a fix value.
We still try to read the EEPROM introspection data at this point.
So we can print the SoM information if available.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Add support for different RAM sizes and speed grades on the
phyCORE-i.MX8MP.
Add support for 1GB 1.5GHz, 1GB 2GHz, 4GB 1.5GHz,
4GB 2GHz and 8GB 2GHz RAM.
The RAM size and speed grade is detected by the information
stored in the EEPROM on the SoM.
Co-developed-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Co-developed-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Co-developed-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
The PHYCORE_IMX8MP is used by the phyBOARD-Pollux. Migrate board to
OF_UPSTREAM. Linux kernel device tree for the board can be used as is,
corresponding U-Boot device tree files are removed. U-Boot tweaks are
kept unchanged.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Teresa Remmet <t.remmet@phytec.de>
The PHYCORE_IMX8MM is used by the phyBOARD-Polis and the
phyGATE-Tauri-L. Migrate both boards to OF_UPSTREAM. Linux kernel device
trees for both boards can be used as is, corresponding U-Boot device
tree files are removed. U-Boot tweaks are kept unchanged.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Teresa Remmet <t.remmet@phytec.de>
Add support for MT53E512M32D1ZW-046 IT:C memory.
This 4 GB memory has 17 row bits instead of 16 and requires 380 ns of
tRFC (tRFCab) instead of 280 ns due to increased channel density to 16 Gb.
Both modifications are retro-compatible with previous memories.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Remove R8A779H0 V4M DTs which are now replaced by OF_UPSTREAM counterparts.
No functional change expected.
This patch finalizes OF_UPSTREAM conversion of R8A779H0 V4M which DTs landed
in Linux 6.9 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Enable OF_UPSTREAM to use upstream DT and add renesas/ prefix to the
DEFAULT_DEVICE_TREE. And thereby directly build DTB from dts/upstream/src/
including *-u-boot.dtsi files from arch/$(ARCH)/dts/ directory.
This patch finalizes OF_UPSTREAM conversion of R8A779H0 V4M which DTs
landed in Linux 6.9 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
The ENV size and offset were changed to different
values in Beacon's downstream release. Change them to the
same values as the downstream for consistent behavior.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Since any changes to the RZ/G2 family go through Marek's tree,
update the MAINTAINER file to automatically show his name
when running get_maintainer.pl. Without this, he is not
copied.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reserve 4 kiB of space in 64bit R-Car DTs when those DTs are compiled
to permit patching in OpTee-OS /firmware node, /reserved-memory node,
possibly also additional /memory@ nodes and RPC node by TFA.
This duplicates behavior in arch/arm/dts/Makefile with OF_UPSTREAM.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Remove leftover DTSI files after OF_UPSTREAM conversion.
Those are no longer used and no longer necessary, remove them.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Adam Ford <aford173@gmail.com>
grepping for usb_ether_curr_dev in u-boot source code shows
$ grep -r usb_ether_curr_dev .
./cmd/usb.c:static int __maybe_unused usb_ether_curr_dev = -1; /* current ethernet device */
$
only declared but never used, so it can safely
removed from code.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
