hextoul() cannot convert a string to a 64-bit number on a 32-bit system.
Use function hextoull() instead.
Reported-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Fixes: 22c48a92cdce ("lib: uuid: supporting building as part of host tools")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Tested-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We often convert hexadecimal strings to hextoull(). Provide a wrapper
function to simple_strtoull() that does not require specifying the radix.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Deduplicate common Renesas defconfig by factoring out the common
parts into generic renesas_rcar_defconfig and including those using
the #include <configs/...> preprocessor macro in the current set of
board specific defconfigs. The preprocessor macro is applicable
to defconfigs as well.
This introduces no functional change, the resulting .config are
identical for all Renesas systems.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Deduplicate defconfigs for all Renesas R-Car 64bit systems by factoring
out the common parts into generic renesas_rcar64.config and including
those using the #include <configs/...> preprocessor macro in the current
set of board specific defconfigs. The preprocessor macro is applicable
to defconfigs as well.
This introduces no functional change, the resulting .config is identical
for all Renesas R-Car 64bit systems.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Deduplicate defconfigs for all Renesas R-Car Gen4 systems by factoring
out the common parts into generic renesas_rcar4.config and including
those using the #include <configs/...> preprocessor macro in the current
set of board specific defconfigs. The preprocessor macro is applicable
to defconfigs as well.
This introduces no functional change, the resulting .config is identical
for all Renesas R-Car Gen4 systems.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Deduplicate defconfigs for all Renesas R-Car Gen3 systems by factoring
out the common parts into generic renesas_rcar3.config and including
those using the #include <configs/...> preprocessor macro in the current
set of board specific defconfigs. The preprocessor macro is applicable
to defconfigs as well.
This introduces no functional change, the resulting .config is identical
for all Renesas R-Car Gen3 systems.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Deduplicate defconfigs for all Renesas R-Car Gen2 systems by factoring
out the common parts into generic renesas_rcar2.config and including
those using the #include <configs/...> preprocessor macro in the current
set of board specific defconfigs. The preprocessor macro is applicable
to defconfigs as well.
This introduces no functional change, the resulting .config is identical
for all Renesas R-Car Gen2 systems.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
In case lists_driver_lookup_name("rst_gen3") fails, the clk_gen3 driver
has to be unbound before erroring out. Reorder the function such that
both clk_gen3 and rst_gen3 drivers are looked up first, if either look
up fails then the function errors out right away. Second, the clk_gen3
is bound, if binding fails, the function still errors out right away
because there is nothing to undo after either lists_driver_lookup_name()
call. Finally, rst_gen3 is bound and if this binding fails, then that
is the only place where clk_gen3 has to be unbound before erroring out.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
With this series opendir, readdir, closedir are implemented for ext4.
These functions are needed for the UEFI sub-system to interact with
the ext4 file system.
To reduce code growth the functions are reused to implement the ls
command for ext4.
A memory leak in ext4fs_exists is resolved.
ext4fs_iterate_dir is simplified by removing a redundant pointer copy.
Link: https://lore.kernel.org/r/20241026064048.370062-1-heinrich.schuchardt@canonical.com
Now that opendir, readir, closedir are implemented for ext4 we can use
fs_ls_generic() for implementing the ls command.
Adjust the unit tests:
* fs_ls_generic() produces more spaces between file size and name.
* The ext4 specific message "** Can not find directory. **\n" is not
written anymore.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
* Some of our file system drivers cannot report a file size for
directories. Use a dummy value in this case.
* For SetInfo the UEFI spec requires to ignore the file size field.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
For accessing directories from the EFI sub-system a file system must
implement opendir, readdir, closedir. Provide the missing implementation.
With this patch the eficonfig command can be used to define load options
for the ext4 file system.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The directory retrieved in ext4fs_exists() should be freed to avoid a
memory leak.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Remove copying a pointer with a cast to the very same type.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
When reading/writing to memory we cannot assume that a base address of
0x0 is correct and functional. So use CONFIG_SYS_LOAD_ADDR as the base
from which we add a bit more padding and being our tests.
Signed-off-by: Tom Rini <trini@konsulko.com>
Update spi negative test case to prevent SF command
from overwriting relocation memory area.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Love Kumar <love.kumar@amd.com>
Function lmb_map_update_notify() is always referenced.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
SCSI READ CAPACITY reports the address of the last block and the block
size. The total number of blocks is thus last block address plus one.
This also fixes the corresponding test case.
Fix "Integer handling issues (SIGN_EXTENSION)" in newly added code:
Cast serial_info.reg_offset to u64 to prevent an integer overflow when
shifted too many bits to the left. Currently this never happens as the
shift is supposed to be less than 4.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
While we want to compile the SPI_STACKED_PARALLEL code everywhere we
can, it must first be guarded with an #if for DM_SPI as not all cases
where we have this code built, such as in SPL, will have the relevant
DM_SPI option enabled.
Fixes: 43423cdc5dc1 ("mtd: spi-nor: Always build SPI_STACKED_PARALLEL code")
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Prevent the code gated by SPI_STACKED_PARALLEL from bitrot
by using if (CONFIG_IS_ENABLED(SPI_STACKED_PARALLEL)) around
it. That way, it is always at least compiled.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The SPI_ADVANCE description does not explain what the switch does.
It does not have anything to do with any advanced functionality, it
only gates off support for stacked and parallel SPI NORs. Rename the
Kconfig symbol, update description, and move it right next to Xilinx
hardware as it seems to be specific to this hardware. Make sure the
symbol is also protected by if DM_SPI in Kconfig.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Rewrite the code to make it clear exactly where the
SNOR_F_HAS_PARALLEL flag leads to *2 and /2 operation
compared to regular code path. No functional change.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The offset variable is set, but never used afterward.
Fix indent. Fix predecrement without justification.
Remove use of parenthesis where unnecessary.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Remove undocumented SST special case. This was added in commit
5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Remove undocumented write_disable() call. This was added in commit
5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Remove undocumented set_4byte() call. This was added in commit
5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Remove undocumented spi_nor_wait_till_ready() call. This was added in commit
5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Remove undocumented nor->addr_width == 3 test. This was added in commit
5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
This also has a bad side-effect which breaks READ operation of every SPI NOR
which does not use addr_width == 3, e.g. s25fs512s does not work at all. This
is because if addr_width != 3, rem_bank_len is always 0, and if rem_bank_len
is 0, then read_len is 0 and if read_len is 0, then the spi_nor_read() returns
-EIO.
Basic reproducer is as follows:
"
=> sf probe ; sf read 0x50000000 0 0x10000
SF: Detected s25fs512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB
device 0 offset 0x0, size 0x10000
SF: 65536 bytes @ 0x0 Read: ERROR -5
"
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Documentation:
* include semihosting and K3 boards only once in table of contents
* include file-system API into HTML docs
* describe struct ext2_inode
* update Python requirements
UEFI:
* mark local functions static
* simplify efi_free_pages()
* pass correct end address value to efi_dp_from_mem()
* fix typos in HII test and eficonfig command
-----BEGIN PGP SIGNATURE-----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=1sEL
-----END PGP SIGNATURE-----
Merge tag 'efi-2025-01-rc2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2025-01-rc2
Documentation:
* include semihosting and K3 boards only once in table of contents
* include file-system API into HTML docs
* describe struct ext2_inode
* update Python requirements
UEFI:
* mark local functions static
* simplify efi_free_pages()
* pass correct end address value to efi_dp_from_mem()
* fix typos in HII test and eficonfig command
The function expects an end address but is being called with
an size instead.
Fixes: 6422820ac3 ("efi_loader: split unrelated code from efi_bootmgr.c")
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Patrick Wildt <pwildt@google.com>
This function is only used locally, so make it static and quiesce
the W=1 warning
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
That variable is defined and assigned a value in two functions
but it's never used.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Mark functions that are only used locally as static and
quiesce W=1 warnings
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
A few functions are only used locally but miss the 'static' keyword.
Add it and quiesce W=1 build wanrings
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This is only used locally so make it static
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To conform with other messages capitalize the first letter:
%s/enter description/Enter description/g
Adjust the unit tests accordingly.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Provide Sphinx style documentation for struct ext2_inode.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
We currently call efi_free_pages() with a notify flag and explicitly
update the efi memory map. That's not needed as lmb_free_flags() will do
that for us if the LMB_NONOTIFY flag is removed
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Update Sphinx, sphinx-rtd-theme, and their dependencies.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Sphinx writes a warning if a page is included twice in the table of
contents. Use references instead.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Neha Malcom Francis <n-francis@ti.com>
Sphinx warns if a page is added to the table of contents twice.
Add a reference instead.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Swig has changed language specific AppendOutput functions. The helper
macro SWIG_AppendOutput remains unchanged. Use that instead
of SWIG_Python_AppendOutput, which would require an extra parameter
since swig 4.3.0.
/home/flk/poky/build-test/tmp/work/qemux86_64-poky-linux/u-boot/2024.10/git/arch/x86/cpu/u-boot-64.lds
| scripts/dtc/pylibfdt/libfdt_wrap.c: In function ‘_wrap_fdt_next_node’:
| scripts/dtc/pylibfdt/libfdt_wrap.c:5581:17: error: too few arguments to function ‘SWIG_Python_AppendOutput’
| 5581 | resultobj = SWIG_Python_AppendOutput(resultobj, val);
| | ^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Markus Volk <f_l_k@t-online.de>
Reported-by: Rudi Heitbaum <rudi@heitbaum.com>
Link: https://github.com/dgibson/dtc/pull/154
We never unmap the memory used to update the EFI memory map after
notifications
Fixes: commit 2f6191526a13 ("lmb: notify of any changes to the LMB memory map")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Create an SoC R5 dtsi file that could be used at board level R5 files. This
would help in keeping the SoC level changes in sync across board files.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
I'd like to get Cc'ed to u-boot's SPI NOR patches to help review them.
The ultimate goal is to have an aligned approach in u-boot and linux.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
