Chintan Vankar <c-vankar@ti.com> says:
This series enables Ethernet Boot on SK-AM62 device.
This series is based on commit 'f4f845b85926' of origin/next branch of
U-Boot.
Logs for Ethernet Boot for AM625-SK:
https://gist.github.com/chintanv133/464782796a9a60b9f5a49e674c5fc31a
In order to support Ethernet boot on AM62x, probe AM65 CPSW NUSS
driver in board_init_f().
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Instead of using the local imx6sl-evk, imx6sl-pinfunc.h and
imx6sl.dtsi devicetree copies from U-Boot, convert the imx6sl-evk board
to OF_UPSTREAM so that the upstream kernel devicetree can be used instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Add a new ahab_derive command that derives the hardware unique key (HUK)
into a 16 or 32 bytes key and stores it at the given address.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Ye Li <ye.li@nxp.com>
doc/develop/makefiles.rst has the following note:
if_changed should not be used more than once per target.
It stores the executed command in a corresponding .cmd
file and multiple calls would result in overwrites and
unwanted results when the target is up to date and only the
tests on changed commands trigger execution of commands.
The mach-imx Makefile does not follow this recommandation, so fix it
by implementing a single command that performs both the cpp_cfg
and imx9_check actions.
This change fixes an issue with "tools/buildman/buildman imx8ulp_evk"
failing every other time [1].
[1] https://lists.denx.de/pipermail/u-boot/2024-August/563192.html
Fixes: f637dfe8c468 ("mach-imx: Add i.MX93 binman support.")
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
The sandbox pinmux driver is used in the non-test devicetree as well as
the test one. I didn't realize this when I modified the driver for
tests, and so broke the regular use case (which only resulted in
warnings). First, making the pinmux and the UART group available
pre-relocation to avoid ENODEV errors. Then, convert the pin groups and
functions to the new style, adding onewire group as well.
Fixes: 7f0f1806e3a ("test: pinmux: Add test for pin muxing")
Closes: https://source.denx.de/u-boot/u-boot/-/issues/2
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Jonathan Humphreys <j-humphreys@ti.com> says:
Upstream DTS added explicit ranges to the fss node. It did not include
the 32 bit memory space needed by the R5 to access OSPI. With the
upstream DTS sync, OSPI boot no longer works.
Adding the missing range here. It is also being added in the upstream DTS,
so after the next upstream DTS sync, these patches can be removed.
Fixes: 5024a96db8e ("Subtree merge tag 'v6.10-dts' of devicetree-rebasing repo [1] into dts/upstream")
Upstream DTS added explicit ranges to the fss node. It did not include the
32 bit memory space needed by the R5 to access OSPI. With the upstream DTS
sync, OSPI boot no longer works.
Adding the missing range here. It is also being added in the upstream DTS,
so after the next upstream DTS sync, this patch can be removed. See
0c0e03ec22 (arm64: dts: ti: k3-j721e: Use exact ranges for FSS node)
Fixes: 5024a96db8e ("Subtree merge tag 'v6.10-dts' of devicetree-rebasing repo [1] into dts/upstream")
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Upstream DTS added explicit ranges to the fss node. It did not include the
32 bit memory space needed by the R5 to access OSPI. With the upstream DTS
sync, OSPI boot no longer works.
Adding the missing range here. It is also being added in the upstream DTS,
so after the next upstream DTS sync, this patch can be removed. See
0c0e03ec22 (arm64: dts: ti: k3-j721e: Use exact ranges for FSS node)
Fixes: 5024a96db8e ("Subtree merge tag 'v6.10-dts' of devicetree-rebasing repo [1] into dts/upstream")
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Upstream DTS added explicit ranges to the fss node. It did not include the
32 bit memory space needed by the R5 to access OSPI. With the upstream DTS
sync, OSPI boot no longer works.
Adding the missing range here. It is also being added in the upstream DTS,
so after the next upstream DTS sync, this patch can be removed. See
f00e626085 (arm64: dts: ti: k3-j7200: Use exact ranges for FSS node)
Fixes: 5024a96db8e ("Subtree merge tag 'v6.10-dts' of devicetree-rebasing repo [1] into dts/upstream")
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Upstream DTS added explicit ranges to the fss node. It did not include the
32 bit memory space needed by the R5 to access OSPI. With the upstream DTS
sync, OSPI boot no longer works.
Adding the missing range here. It is also being added in the upstream DTS,
so after the next upstream DTS sync, this patch can be removed. See
f062a015f4 (arm64: dts: ti: k3-j784s4: Use exact ranges for FSS node)
Fixes: 5024a96db8e ("Subtree merge tag 'v6.10-dts' of devicetree-rebasing repo [1] into dts/upstream")
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Upstream DTS added explicit ranges to the fss node. It did not include the
32 bit memory space needed by the R5 to access OSPI. With the upstream DTS
sync, OSPI boot no longer works.
Adding the missing range here. It is also being added in the upstream DTS,
so after the next upstream DTS sync, this patch can be removed. See
f062a015f4 (arm64: dts: ti: k3-j784s4: Use exact ranges for FSS node)
Fixes: 5024a96db8e ("Subtree merge tag 'v6.10-dts' of devicetree-rebasing repo [1] into dts/upstream")
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
The early malloc region is normally quite small and is certainly less
than 4GB, so use a 32-bit value for the limit and pointer. Update the
comments for clarity while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
The bus clock and memory clock are unlikely to go above 4GHz for now, so
reduce the field size to 32 bits.
Signed-off-by: Simon Glass <sjg@chromium.org>
Provide a function to locate this information, rather than doing it
automatically on startup, to save space in global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
We don't need a full word for this boolean value. Convert it into a flag
to save space in global_data.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Only m68k and powerpc use this field, so move it to the arch-specific
info, to reduce the size for other archs.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having every caller set this up individually, create a
common init function. This allows new fields to be added without the
risk of them being left uninited.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Make the raw-mode options depend on SPL_SYS_MMCSD_RAW_MODE in a more
direct way. This makes it easier to understand the options with
'make menuconfig'.
There are three different ways of specifying the offset:
- sector offset
- partition number
- partition type
So make these a choice, so it is more obvious what is going on.
Update existing boards to enable SPL_SYS_MMCSD_RAW_MODE where needed.
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than repeating the same code in two files (SPL and TPL), move it
to a shared filed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Currently, the bmode command only supports booting from ecspi1.
Expand it to also support booting from ecspi3.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
With DM_SERIAL in place, there is no need to setup the UART pins
in the board code.
The UART pins are setup via devicetree, thanks to DM.
Remove the unneeded code.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Christian Marangi <ansuelsmth@gmail.com> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
Rename each entry from CK to CLK to match the include in upstream kernel
linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Convert to infracfg gates + muxes implementation now that it's
supported.
Drop infracfg-ao nodes and rename all infracfg-ao clocks to infracfg.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Now that we can have advanced parent handling for mux, we can drop
spurious topckgen 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7986.
Drop the factor entry from mt7986-clk.h and reference to them in
mt7981.dtsi. Muxes and gates are updated to reference the apmixed clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for apmixed.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Rename TOPCKGEN factor clock to upstream neaming.
Upstream kernel linux reference the factor clock for apmixedpll with the
"pll" suffix. Align the naming to the upstream naming format in
preparation for OF_UPSTREAM support.
Also rename rtc clock to drop the CB_ as upstream doesn't have that.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Now that we can have advanced parent handling for mux, we can drop
spurious infracfg 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7986.
Drop the factor entry from mt7986-clk.h and reference to them in
mt7981.dtsi. Muxes and gates are updated to reference the topckgen clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for infracfg and topckgen.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Upstream kernel linux clock include use TOP_XTAL instead of CB_CKSQ_40M.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi <ansuelsmth@gmail.com> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
Rename each entry from CK to CLK to match the include in upstream kernel
linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Convert to infracfg gates + muxes implementation now that it's
supported.
Drop infracfg-ao nodes and rename all infracfg-ao clocks to infracfg.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Rename TOPCKGEN factor clock to upstream neaming.
Upstream kernel linux reference the factor clock for apmixedpll with the
"pll" suffix. Align the naming to the upstream naming format in
preparation for OF_UPSTREAM support.
Also rename rtc clock to drop the CB_ as upstream doesn't have that.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Now that we can have advanced parent handling for mux, we can drop
spurious infracfg 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7988.
Drop the factor entry from mt7988-clk.h and reference to them in
mt7988.dtsi. Muxes and gates are updated to reference the topckgen clk
following how it's done in upstream kernel linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Upstream kernel linux clock include use TOP_XTAL instead of CB_CKSQ_40M.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi <ansuelsmth@gmail.com> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
Convert to infracfg gates + muxes implementation now that it's
supported.
Drop infracfg-ao nodes and rename all infracfg-ao clocks to infracfg.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add and fix support for pwm3 clock. In the pwm DTSI node we were
actually using PWM2 clock for PWM3. Now that we have correct ID also add
the missing entry of gate and mux to support PWM3 clock.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Now that we can have advanced parent handling for mux, we can drop
spurious infracfg 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7981.
Drop the factor entry from mt7981-clk.h and reference to them in
mt7981.dtsi. Muxes and gates are updated to reference the topckgen clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for infracfg and topckgen.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
